#1 Home Improvement Retailer

Internet #206110567

Model #77-002244

R-9 Insulated Water Heater Blanket

  • Saves energy by helping your water heater work more efficiently
  • Applicable with gas, oil, and electric water heaters
  • Provides better insulation with vinyl and fiberglass material
  • View More Details

Product Overview

Everbilt Water Heater Blanket helps save energy by making a gas, oil or electric water heater more efficient. This blanket is made of fiberglass backed with Vinyl that enhances the insulation of the water heater without adding excess bulk to it. It has an insulation rating of R-9.
  • Adds insulation to water heater, increases R-value
  • Easy to install
  • Includes vinyl tape 3 in. x 94.5 in.
  • Saves energy
  • Versatile for gas, oil and electric water heaters
  • 48 in. x 75 in. when unrolled

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
24
Product Height (in.)
10
Product Width (in.)
10

Details

Finish Family
White
Material
Fiberglass
Product Type
Blanket/Jacket
Product Weight (lb.)
5.2
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
Limited Warranty

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 3.4
    out of 110 reviews
  • 63% recommend this product
Filter by:
Showing 1-30 of 110 reviews
too small
Appears to be good quality product. However, it just isnt big enough. I have a very common 50 gallon tankand it barely went half the way around! Now i have to buy another one to finish yhe job.
by
Response from VPC, Home-Flex ExpertFeb 19, 2019
Hi dano, I just want to make sure that you are wrapping the blanket around with the length in the horizontal position? We try to call out that the length of this blanket is 75 inches. That means that it will wrap around a water heater that has a diameter of 24 inches or less. ValenciaPipe
    • Recommended
    I purchased this at the store & installed it yesterday. The utility room, where the water heater ...
    I purchased this at the store & installed it yesterday. The utility room, where the water heater is, is not as warm as it used to be & I don't feel warmth on the outside of the blanket. I used to feel some warmth on the outside of the water heater itself & now, under the insulation, it's still definitely warm, so I have to assume that the radiant heat is being kept in & hope that the heater will be more efficient. My tank is 50 gallon gas, with R 6.7 rating. So far I'm very happy with the blanket but the manufacturer needs to be clearer about the measurements, as some people said it didn't fit. The blanket is 75" but it will NOT fit a tank that is 75" circunference, contrary to seller's responses. The insulation is about 1.5" thick so it adds to the size that the plastic will cover, and you DO want the plastic ends to meet. My tank is about 21" diameter, 66" circumference, & the blanket just fits without cutting or too much pulling of the ends. 75" circumference of the PLASTIC would cover about 24" diameter, which is what my tank now measures when adding the girth from the insulation. Most people won't think to do the math so the seller needs to be a little better in responding, & perhaps could add these numbers to it's labeling. Th fact that it doesn't go down all the way is fine, as the very bottom of most tanks houses the heating element, not the hot water. Some tips for installation, in case it helps anyone. I'm a senior citizen & installed this by myself so take heart-you can do it, too! -Take photos of all labels on the tank, especially lighting instructions, model #, serial # and manufacturing date. Print photos & put in plastic bag & attach to tank. You never know when you may need this info! -The fiberglass insulation is slippery on the tank so it was easier to tape the top parts together, lift a litle, then tape some more. By the time I taped down to the part over the knobs it stayed in place enough for me to then tape the top with duct tape (not enough other tape included) so that I didn't have exposed fiberglass, & the blanket stayed in place & looks better. So far duct tape holds when the tank heats up. -If you have to trim it do it while it's around the heater, if possible, as it's a nuisance to work in small spaces and wrap it again. Also, the plastic will detach somewhat with too much handling & you will get more fiberglass on you. -Wear some rubber gloves (hair color, mechanics, surgical) & a nylon or other slippery jacket so that the fiberglass doesn't stick to you. I removed the gloves eventually but kept the windbreaker on. -Cut strips of the tape ahead of time as you have to peel the backing off. Attach one tip of the tape to a nearby surface for easy access. Hope this helps someone.
    by
      • Recommended
      2 people found this helpful
      This blanket is only vinyl covered on 1 side so fiberglass comes off when trying to install it. ...
      This blanket is only vinyl covered on 1 side so fiberglass comes off when trying to install it. My water heater uses boiler water to heat domestic water and there are pipes coming out of the side, so I had to trim around them which was very difficult with this .item. It resulted in a sloppy job. Also insulation gets all over your body. I will get one that does not use fiberglass.
      by
        2 people found this helpful
        Don't know as to how to rate the blanket as...
        Don't know as to how to rate the blanket as of yet. Haven't had it on the water heater but for a month. So would be unfair to give a rating as well.
        by
        • Verified Purchase
        Not too hard to install. Just barely fit my 50 gallon heater. I can't tell any difference in perf...
        Not too hard to install. Just barely fit my 50 gallon heater. I can't tell any difference in performance, but hopefully saving some energy.
        by
        • Verified Purchase
        • Recommended
        Way too small, and it falls apart as you work...
        Way too small, and it falls apart as you work with it because the blanket isn’t attached. Terrible product - I gave up and threw it away.
        by
        Response from VPC, Home-Flex ExpertApr 16, 2019
        I am sorry that this blanket was too small for your water heater JJ. We do state in bold that when laid out flat on the floor, this blanket measures 48 inches by 75 inches. If 75 inches is not long enough to wrap around your water heaters tank, you just simply add another blanket and trim to fit. The blankets are held in place using tape. ValenciaPipe
        • Verified Purchase
        It's not so "universal" as it claims. The blanket does...
        It's not so "universal" as it claims. The blanket does not fully cover my 45 Gal tank. There is approximatly a 4" gap left after wrapping.
        by
        Response from VPC, Home-Flex ExpertMar 25, 2019
        Hi Jourmungandr, The best way that we can help you to determine if this blanket will fit your water heater is to state it's dimensions in the "Product Overview" section on the website and on the product packaging. when you lay out this blanket flat on a floor it will measure 48 inches by 75 inches approximately. The fiberglass batt can be pulled or pushed to slightly change dimensions, that is why I state the dimensions as being approximate. That means that it will fit around a water heater that has a circumference of 75 inches or less. If your water heater has a diameter of 24 inches or less, this blanket will wrap around it. ValenciaPipe
        • Verified Purchase
        4 Star Review
        Rating provided by a verified purchaser
        by
        • Verified Purchase
        Not cut to fit automatically ...
        Not cut to fit automatically
        by
        Response from VPC, Home-Flex ExpertFeb 23, 2019
        Hi HomeDepotCustomer. Correct, this is a trim to fit water heater blanket. It is 48 inches tall by 75 inches across. If that is too long for your water heater, you just simply trim it using scissors. ValenciaPipe
        • Verified Purchase
        5 Star Review
        Rating provided by a verified purchaser
        by
        • Verified Purchase
        5 Star Review
        Rating provided by a verified purchaser
        by
        • Verified Purchase
        This product could be alot eather to install and the fiberglass should be encased these are almos...
        This product could be alot eather to install and the fiberglass should be encased these are almost impossible to use
        by
        • Verified Purchase
        1 person found this helpful
        First i will say that there was an improvement in the water heater ability to hold heat. However ...
        First i will say that there was an improvement in the water heater ability to hold heat. However there was not enough material to cover a 40 gallon tall tank.
        by
        Response from VPC, Home-Flex ExpertFeb 7, 2019
        This water heater blanket measures 75 inches long. That means that it will fit around a water heater with a circumference of 75 inches or less. If your water heater has a diameter of 24 inches or less, this blanket will wrap around it. ValenciaPipe
        • Verified Purchase
        it got cold in Georgia and I used this blanket to cover my pond pumps. It worked great so far. I...
        it got cold in Georgia and I used this blanket to cover my pond pumps. It worked great so far. I have used these covers for my heaters in the past yes they do Linked I used this blanket to cover my pond pumps. It worked great so far. I have used these covers for my heaters in the past yes they do Extend the life of the water heater.
        by
        • Verified Purchase
        • Recommended
        The blanket didn't fit our water heater, even though we...
        The blanket didn't fit our water heater, even though we measured it accurately. We had to piece it together.
        by
        • Verified Purchase
        The cover is fine. We were just thinking in might...
        The cover is fine. We were just thinking in might cover the whole tank.
        by
        • Verified Purchase
        Works great fit great I have a large water heater...
        Works great fit great I have a large water heater
        by
        • Verified Purchase
        not a heavy duty blanket. Price is good, tape...
        not a heavy duty blanket. Price is good, tape works well and size is as represented. Easy to install if you wipe your tank down first so there isn't any dust to prevent the tape from adhereing properly. I used mine for my well tank as the waterheater blanket was big enough to wrap my tank ... for 22.00. Well tank covers were for a 26" diameter tank and 123.00 each...my tank is 84" around!!
        by
        • Verified Purchase
        Used this on a low boy water heater that is...
        Used this on a low boy water heater that is 77+ inches around. The height is only 38 inches so there was enough material to trim 10” off one side to fill the gap where it didn’t meet encircling the tank. I did need a lot of extra duct tape to secure the insulation tightly in place. Good 9 R-value.
        by
        • Verified Purchase
        1 person found this helpful
        Covered water heater, but unable to wrap completely due to too close to back wall.
        Covered water heater, but unable to wrap completely due to too close to back wall.
        by
        • Verified Purchase
        • Recommended
        Simple & Easy to install. ...
        Simple & Easy to install.
        by
        • Verified Purchase
        It did not properly fit the diameter of my 60...
        It did not properly fit the diameter of my 60 gallon tank. Left a 6 to 8 inch gap.
        by
        Response from VPC, Home-Flex ExpertDec 27, 2018
        I am sorry that it did not fit Teryl. We try to give you the information regarding the size of this blanket by stating its dimensions on the packaging and in the description. It measures 75 inches long by 48 inches across. This means that it will fit a water heater with a circumference of 75 inches. (24 inches Diameter approximate) ValenciaPipe
        • Verified Purchase
        1 person found this helpful
        Too small for many water heaters. Please just make it...
        Too small for many water heaters. Please just make it over-sized and the purchaser can overlap if needed.
        by
        Response from VPC, Home-Flex ExpertDec 19, 2018
        Hi HomeDepotCustomer, Thank you for taking the time to share your suggestion. The length of this blanket is 75 inches. That means that it will wrap around a water heater that has a 24" diameter. What size do you think would be better? If possible, give us a call? We are here from 8-5 Los Angeles Time M-F. 661-257-3923. Ask for Jon ValenciaPipe
        • Verified Purchase
        1 person found this helpful
        Easy to install. Seems to work great on our...
        Easy to install. Seems to work great on our Association pool water faucet when we had sub-freezing temperatures.
        by
        • Verified Purchase
        Fit my 30 gal. h20 heater. Made in China with one side plastic and one side fairly loose fibergla...
        Fit my 30 gal. h20 heater. Made in China with one side plastic and one side fairly loose fiberglass. The tape came loose in less than 48 hours. Plan on using your own materials to attach this thing.
        by
          simple to install, secure, however--did not include ways to cover the top of the water heater---w...
          simple to install, secure, however--did not include ways to cover the top of the water heater---when purchasing cover--get the right sized one...they did not stock one for 80 gallon...one in stock was not large enough around.
          by
          • Verified Purchase
          • Recommended
          Just some insulation to tape onto your hot water heater....
          Just some insulation to tape onto your hot water heater. I was not thrilled with the tape that was included.
          by
          • Verified Purchase
          Could be bigger ...
          Could be bigger
          by
          • Verified Purchase
          Easy to put on. Working great.
          Easy to put on. Working great.
          by
          • Verified Purchase
          • Recommended
          This would be a better product if it fit. On a standard 50G electric water heater is was 12+" to...
          This would be a better product if it fit. On a standard 50G electric water heater is was 12+" too short. Had I known this I would have purchased one from my plumbing supply house. They are usually large enough that you have to trim to fit. The everbilt product probably works on a gas heater but not electric.
          by
          Response from VPC, Home-Flex ExpertNov 21, 2018
          I'm sorry that the Everbilt blanket did not fit Kooch. We try to make the dimensions stand out. 75 inches long by 48 inches high. The 75 inches length means that it will wrap around a water heater with a 75 inch circumference. If your water heater has a diameter of 24 inches or less, this blanket will wrap around it. ValenciaPipe
            Showing 1-30 of 110 reviews