#1 Home Improvement Retailer

Internet #204629285

Model #PowerPlasma 60S

60 Amp PowerPlasma 60S IGBT Inverter DC Plasma Cutter with 1-1/4 in. Max Cutting Capability, 240V

Frequently Bought Together

+
Price:

Product Overview

Make a list of everything you want in a plasma cutter. Chances are that you'll come up with a list that matches up pretty closely to the list of features of the Everlast PowerPlasma 60S. It has the convenience, portability and performance that will meet the needs of everyone from the weekend enthusiast to the welding and fabrication shop. The PowerPlasma 60S is built on an inverter platform, making use of IGBT modules from Infineon (Siemens) to reduce weight, and improve reliability and performance over the individual IGBT design. The unit has plenty of cut capacity with a recommended 3/4 in. daily cut, a 7/8 in. clean cut and a 1-1/4 in. severance cut capability. The genuine Trafimet S-75 torch is part of the standard package and features blow back start, and a pilot arc. The PowerPlasma 60S features a 3 second tip saver to reduce premature consumable wear by limiting pilot arc on time, if no cutting is taking place.
  • Easy starting with blow back pilot arc allows easy cutting of rusty and painted metals
  • Cuts virtually any type of metal with ease
  • Simple to use torches with inexpensive service parts and consumables
  • Commercial class, 60% duty cycle at 60-Amp
  • Clean, smooth cuts with the genuine Trafimet S-75 torch
  • Blowback start starts arc without the need of high frequency which can interfere with surrounding electronics
  • Pilot arc improves performance and cutting on dirty, painted, or rusted metals
  • 3 second pilot arc tip saver feature shuts down pilot arc after 3 seconds of continuous operation if no cutting is present to prevent premature consumable wear
  • Front air pressure gauge allows quick verification of air pressure
  • Over current and duty cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
  • Adjustable post flow timer for maximum consumable life
  • IGBT modules from Infineon (Siemens) improve reliability and performance while reducing overall weight
  • CNC socket for CNC use on plasma tables (machine torch optional)
  • Suitable for use with 11,000-Watt clean power generators

Compare Similar Plasma Cutters

115-Volt 20 Amp P20 Single Phase Plasma Cutter for Cutting up to 1/4 in. Steel, 9-1/2 ft. Torch Reach and 8 ft. Ground
current product
60 Amp PowerPlasma 60S IGBT Inverter DC Plasma Cutter with 1-1/4 in. Max Cutting Capability, 240V
Tomahawk 625, 40 Amp 230-Volt Plasma Cutter for Steel with Hand Torch
BrandLincoln ElectricEverlastLincoln Electric
Name115-Volt 20 Amp P20 Single Phase Plasma Cutter for Cutting up to 1/4 in. Steel, 9-1/2 ft. Torch Reach and 8 ft. Ground60 Amp PowerPlasma 60S IGBT Inverter DC Plasma Cutter with 1-1/4 in. Max Cutting Capability, 240VTomahawk 625, 40 Amp 230-Volt Plasma Cutter for Steel with Hand Torch
Price
Ratings
(7)
(3)
(0)
Recommended Cutting Capacity1/4"1 1/4"3/4"
Input Power (Volts)115220230
Duty Cycle (%)406035
Maximum amperage output (amps)206040
Rated Output (Volts)2010496
Engine PowerElectric (AC)Electric (AC)Electric (DC)
Welder TypePlasma CutterPlasma CutterPlasma Cutter
Minimum amperage output (amps)102010
View ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
22 in
Product Height (in.)
17 in
Product Width (in.)
9 in

Details

Duty Cycle (%)
60
Engine Power
Electric (AC)
Included
Kit
Input Power (Volts)
220
Maximum amperage output (amps)
60
Minimum amperage output (amps)
20
Rated Output (Volts)
104
Recommended Cutting Capacity
1 1/4"
Returnable
90-Day
Tools Product Type
Power Tool
Welder Type
Plasma Cutter

Warranty / Certifications

Manufacturer Warranty
5 years warranty

Questions & Answers

16Questions23Answers

What is the weight?

Asked by Alcacio July 27, 2020
1
Answer

Unit alone is 53 lbs. As shipped, in box with accessories 65 lbs.

Since the 60s is discontinued will you receive the 62s in place of this one?

Asked by Curious June 20, 2020
2
Answers

Yes, you will. Also, new PowerPlasma 62i listing is finally on homedepot. And this, PowerPlasma 60S listing is being discontinued.

When will the 62i replace this version? I think this model is discontinued. It has been replaced with the Everlast PowerPlasma 62i.

Asked by RC April 16, 2020
2
Answers

it was (discontinued), and it is, (being replaced), slowly. homedepot channel is a bit behind everlast. perhaps in a month or two, you will seee new listing.

I can’t find the consumables on Home Depot web site are they inter changeable with other units

Asked by Aron February 13, 2020
1
Answer

Consumables are available direct from Everlast for the iPT60 torch, online from distributorsa nd locally from other places. The unit comes with a starter kit. FWIW, this unit has been replaced by the PowerPlasma 62i. Both units use the same consumables however.

How long is the touch cable

Asked by Aron February 9, 2020
3
Answers

~12.5 ft standard stock. you can request a longer lead upgrade to ~25 ft, at the time of purchase, but from everlast directly only. upgrade feature is not yet available through homedepot channel.

When will you be getting more in stock?

Asked by Jcuddy September 10, 2018
3
Answers

in-stock now.

What is the gas flow/pressure requirement? ??CFM @ ?? PSI

Asked by Shinerfan May 17, 2018
3
Answers

Recommended Cutting Air Pressure: 75 psi. Recommended Compressor Capacity: 6CFM @ 90 psi / 30 gallon tank.

What size breaker is required ? How many amps total does this draw ?

Asked by M35A2 March 18, 2018
3
Answers

45 amps breaker should do it.

When will this be back in stock?

Asked by Jim February 16, 2018
2
Answers

yes, hopefully next week.

does it come with a power cord?

Asked by HD January 6, 2018
3
Answers

Yes, a power cord is included.

60 Amp PowerPlasma 60S IGBT Inverter DC Plasma Cutter with 1-1/4 in. Max Cutting Capability, 240V - page 2

Customer Reviews

  • 5
    out of 3 reviews
  • 100% recommend this product
Filter by:
Showing 1-3 of 3 reviews
This machine is well made, easy to set up and the best thing about it , which is the main reason ...
This machine is well made, easy to set up and the best thing about it , which is the main reason I bought it is the blowback start feature. I don't need to prep the metal, clean it or anything. It cuts right through rust and paint and all. It's awesome. First Day I got it, I cut several 1/4" plates for some stands I made for a vise, and a metal bending tool. I definitely recommend it.
by Rob
This thing cuts metal like butter I hope it holds...
This thing cuts metal like butter I hope it holds up to its name we will see.So far it is great!
by TrikerT
2 people found this helpful
Plasma cutter arrived!
I have been waiting for this plasma cutter to be in stock for an eternity but it was well worth the wait. Virtually everyone in my metal class bought Everlast welders when we graduated and now that we're all working and no longer starving students many of us are now looking for plasma cutters ... but not me! I just picked up this bad boy and it is a beast! You cannot go wrong with this plasma cutter.
by RobE
5 people found this helpful
Showing 1-3 of 3 reviews