Hey there, thanks for the great question! The Flex Glue adheres to most surfaces to bond, seal, and repair virtually anything. When you have a moment, send us a message at Humans@FlexSealProducts.com with more details, so we can find the best solution for your repair. Have a Flextastic day!
Hey there, thanks for the great question. The Flex Glue adheres to most surfaces, including wood, drywall, and many more. When you have a moment, message us at Humans@FlexSealProducts.com, so we can further assist. We look forward to hearing from you, until then, take care and Flex On!
Hi there George, that's a great question. While many of our products have great adhesion and can repair virtually everything, we need a bit more information to suggest the appropriate product for your specific repair. When you have a moment, message us at Humans@FlexSealProducts.com with additional details and photos so we can recommend the best solution. We look forward to hearing from you. Take care and Flex On!
Yes, it can. In fact it's one of the recommended surfaces for Flex Glue. Please make sure the area is clean before applying the product and allow the right time for the Flex Glue to sit and cure before using the rubber once again. Message us anytime if you need any help through Humans@flexsealproducts.com.
Can Flex glue be used on shoes?
Good evening. It dries into a hard rubber like material that can expand or contract depending on the temperature.
Good Morning, thank you for reaching out. Yes, Flex Glue can be used on an active water leak as long as there is no pressure involved as it will lower the adhesion properties. Please make sure the area being sealed is clean and free of all dirt and grease. If you have any questions, please feel free to contact us at any time at Humans@flexsealproducts.com. Take good care.
Hello, thank you for reaching out. Our Flex Glue will adhere to most surfaces including some plastics. We recommend you test it on a small area first before applying it for the project. If you have any other questions, please feel free to message us at Humans@Flexsealproducts.com. Take good care.
Less than 1 Hour
Flex Glue works well with glass and with PVC which is typically what the top layer of the convertible is made. For best results, start with a clean surface free of grease, oil, and dirt. Apply liberally to one of the surfaces to be bonded and apply firm and constant pressure for a minimum of 10 to 30 seconds for instant grab to take hold. Some application may require bracing. Please let us know how the project goes at firstname.lastname@example.org and happy flexing!