The FLIPTOGGLE anchors strong toggling mechanism supplies extra holding power in drywall, plaster or hollow concrete blocks. Its main feature is its ability to be installed in thicker hollow wall material, up to 3 in. thick. It's simple and effective tilting mechanism ensures a trouble-free installation every time, and is twice as strong as the regular toggle bolt of the same bolt diameter. The FLIPTOGGLE requires a 1/2 in. hole regardless of its diameter, and can be used with any bolt length.
Ideal for all type of hollow wall, up to 3 in. (75 mm) thick
Requires an one 1/2 in. hole
Fast and easy installation
New 1 strap design for easier insertion and flipping operation
Cobra Anchors' warranty shall be to replace the product
Questions & Answers
1Questions2Answers
How much space do you need to have it flip? I have a 3/4" space.
Asked by Oldhouse October 5, 2020
2
Answers
You will need an inch and a quarter or inch and a half
Customer Reviews
3.9
out of 126 reviews
80% recommend this product
563
428
310
29
116
Filter by:
Showing 1-10 of 126 reviews
Mar 19, 2021
I utilized to hang 32" TV on articulating wall mounts...
I utilized to hang 32" TV on articulating wall mounts in 3/4" drywall in order to center perfectly in room. I also utilized these to mount 32" TV to old block wall due to blow out of drill holes preventing ability to use concrete screws. These are much stronger than any other drywall anchor I've tried before. Highly recommend.
by SimpleDad
Apr 10, 2021
They break too easily...
They break too easily
by HomeDepotCustomer
Response from Cobra AnchorsApr 12, 2021
Dear HDCustomer, Thank you for sharing. We are sorry to read that you encountered some difficulties with our FLIPTOGGLE. Would you be kind enough to contact us, we would like to hear more about your issues with the product and like to assist's you further. lynnleclerc@cobraanchors.com BEST REGARDS
Apr 1, 2021
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Mar 31, 2021
They break trying to put in wall. Had more broken...
They break trying to put in wall. Had more broken pieces than usable ones. Do not recommend
by Jim
Response from Cobra AnchorsApr 2, 2021
Hello James, Thank you for sharing. We are sorry to read that you encountered some difficulties with our FLIPTOGGLE. Would you be kind enough to contact us, we would like to hear more about your issues with the product and like to assist's you further. lynnleclerc@cobraanchors.com BEST REGARDS
Mar 18, 2021
Work good. 1/2 drill bit, insert and pull. ...
Work good. 1/2 drill bit, insert and pull. Downside it is plastic with a metal clip. I have had three snap off just below the catch which caused the metal clip to fall. I will use these, easy and hold what is needed. Work with carefully.
by DAVID
Mar 11, 2021
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Mar 6, 2021
Works well but if not careful you will snap it...
Works well but if not careful you will snap it off before needed and therefore it’s no good
by RB
Feb 19, 2021
This flip toggle is ok hate to bash brands but...
This flip toggle is ok hate to bash brands but they used to sell toggle bolts and those are awesome. I had 3 of these break funny and it resulted in me pushing them inside the wall and installing another not a big deal but I dislike the tail thing.
by Bazan
Response from Cobra AnchorsFeb 22, 2021
Hello Bazan, Thank you for sharing. We are sorry to read that you encountered some difficulties with our FLIPTOGGLE. Would you be kind enough to contact us, we would like to hear more about your issues with the product and like to assist's you further. lynnleclerc@cobraanchors.com BEST REGARDS
Feb 19, 2021
Some of them break pretty easy. I used up quite...
Some of them break pretty easy. I used up quite a few before I could get a solid one
by HomeDepotCustomer
Feb 18, 2021
These work really well for attaching almost anything to drywall. However, I haven't had much luck...
These work really well for attaching almost anything to drywall. However, I haven't had much luck using these on concrete block structures since the design was swapped to the single-sided ratchet strap.
Ultimately, I would absolutely recommend them for most situations, they're tough, easy to use, & strong.
1/8 in. x 3 in. Zinc-Plated Steel Mushroom-Head Phillips Toggle Bolts with Screws (25-Pack)
Ideal for use in hollow walls and hallowIdeal for use in hollow walls and hallow masonry applications, these toggle bolts have excellent anchoring ability. A special wing spreads the force over a larger load-bearing surface and comes attached to a machine screw. These screws are made of long-lasting steel and zinc-plated for durability. Properly position toggle bolts prior to pre-drilling the hole.See Full Product Description