Why? Seems unnecessary to many of us
You ate absolutely right Jem!! I also attempted to install 38 of the square trim to a newly renovated apartment. The design and look were amazing but to get a flysh fitting to the ceiling was imposible. The alternative gadget recommendations did not work either. All 38 pieces were returned and I replaced them with the round Feit trimming which look fantastic. I selected the round trimming with the LED closer to the ceiling. In other words with the least indent from the trimming to gain the look of the square trim.
IT is a an LED fixture - so the light is included. - The customer I installed this lights for loved them.
the beam angle is 109.
I am using the same Diva Dimmer with the round trimming. No buzzing but complete dimming is not achieved.
This retrofit kit is only available in white trim.
Rankin, The baffle is approximately 7 1/2 inches square. You may possibly be able to use the Commercial Electric 1x1 square or 11in round Edge Lit, depending on the can or J-box you have. Please review the installation links on HD.com for both of these items for compatibility:http://www.homedepot.com/p/Commercial-Electric-11-in-White-LED-Edge-Lit-Flat-Round-Panel-Flushmount-74047-HD/206040710 or http://www.homedepot.com/p/Commercial-Electric-1-ft-x-1-ft-White-LED-Edge-Lit-Flat-Panel-Flushmount-74029-HD/206040712. Or if you are looking for a more decorative fixture: http://www.homedepot.com/p/Feit-Electric-15-in-Nickel-LED-Flat-Round-Panel-Flushmount-74023/207014574
Unfortunately, this item only fits in 6 in. cans.
Only if there are torsion bar receptors inside, they look like an old fashioned mustache on both sides of the can.