36 in. x 82 in. Black Fiberglass Magnetic Door Window Screen

Fenestrelle screens are made in China. I am not aware of any similar door screens made in the U.S.

Not at the present time. We do plan on bringing in a screen with white trim; however the fiberglass screen will remain the same.

I believe this should work. Our original design only had a 1 inch wide mounting strip which worked fairly well. Since then we have redesigned it to a wider mounting strip (1-3/8 inch) but you can still reposition the screen on the mounting strip so that the screen can cover your opening.

We have 14 magnets in ours. Each of our magnets is about 10-1/2 inches long. They start several inches below the top (to allow flexibility) and then form a continuous strip to the bottom of the screen. There's just a little bit of room (1/2") between each magnet to allow the screen to fold and give enough movement for you to go through. We've never weighted our door screens because we find we don't need to. We use a heavier weight fiberglass that doesn't flutter around; second, our magnets snap close quickly; and third our strip magnets form a tight seal and are strong enough to keep the screen closed even in high winds.

Yes, this is designed for use on a single door. The 36" wide screen works best on doors up to 34" in width. If you have a 36" wide door you may want to use our mode FEN 92500 which is 39" wide overall.