Hello, please see product information https://images.homedepot-static.com/catalog/pdfImages/4e/4e625215-6251-4aed-bf1f-8a5df981e2fb.pdf . Thank you
Hello, you can special order specific sizes from your local Home Depot through their special order program, thank you.
Hello – these are not structural panels. The panel make-up is FRP on Polypropylene fluted corr: https://www.nudo.com/resources/p6_product_data.pdf These are more of a lightweight wall liner, thank you.
Hello, you can install direct to block or poured wall however you will need the proper fasteners for installing into wall. You can also use an adhesive for added hold. Please see link to install guide for FiberCorr: https://www.nudo.com/resources/p6_installation.pdf As for painting the surface, the manufacturer does not have any recommendations. You would need to contact the paint manufacture to see if they have recommendations for painting FRP panels.
Hello the below material is Class”C”. Fire Rating test E-84: Flame Spread Index ≤ 200 Smoke Generation ≤ 450. Thank you.
Hello, it's more flexible than solid plastic sheet, it will give a little bend, not much - should be fine to use as camper walls, thank you!
Hello, As long as the panels are acclimated to the room before install. Should not have a problem, thanks!
Hello, Typical installation is for wall application, this material has an R-value is less than 1, thank you.
Hello, to clarify - It really depends what is referred to as high moisture and extremely high moisture. Basically you do Not want to leave these submersed in water. The face as long as there are no defects should deter water all day long. If water levels are going to be rising and falling in a room where these are used. You may want to find another panel. These are not like water proofing a room. These panels are surface mounted to existing walls/studs. The panel make up is fluted corrugated, water can get trapped in behind the panel if water levels rise. If water gets behind the panel, you are going to have bigger problems than worrying about a surface mounted panel. Rotting studs, wet insulation, etc… Car washes, touchless car washes, wash down bays, etc…should not have an issue with repelling water and cleaning up easily.
Hello, we do not offer connectors for this product, thank you.