#1 Home Improvement Retailer

Internet # 304353914

Model # 251

Store SKU # 1003125677

Easy Weld 20 P Plasma Cutter

$460.59
Apply Now
Pay $410.59 after $50 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Cuts up to 1/4-in. mild steel
  • Ideal for sheet metal to thin plate cutting, generator friendly
  • Includes: 13 ft. torch, 8 ft. ground clamp, 20-15A adapter
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

The Forney Easy Weld 20 P is a powerful and easy to use plasma cutter. Weighing only 21.5 lbs. (9.75 kilograms), this machine is easily transportable. This plasma cutter also features Drag Torch Technology, which allows you to drag the tip directly on the surface of the material for smooth and precise cuts. What's more, this machine is generator friendly and runs off a standard 120V outlet, making cutting on the go easy and efficient. With this plasma cutter, you can clean cut mild steel, stainless steel, aluminum, galvanized steel, brass and copper up to 1/4". This machine can also cut aluminum up to 3/16". For auto body, farm & ranch, contractor, metal art, and do-it-yourself projects, the Forney Easy Weld 20 P is the ideal choice.

Highlights

  • CUTS- Mild steel, aluminum and stainless steel from thin material to 1/4"* (6.35 millimeters) with ease! *(Mild Steel)
  • EASY TO USE- All you need is 120 volt power source and 1.5 CFM of compressed air. Built in regulator and air dryer make operation a breeze. Air Compressor Not Included.
  • DRAG TORCH TECHNOLOGY- Allows you to drag cutting tip in direct contact with the metal you're cutting for smooth consistent clean cuts
  • LIGHT AND PORTABLE- Forney's 120-volt 20 P Plasma Cutter is generator friendly so on the go cutting and moving to different job sites is possible
  • RUGGED- All metal case. Built to take the day to day
  • MACHINE INCLUDES- Includes a 13' cutting torch, 8' ground clamp, 20A-15A adapter, 1 additional electrode and 1 additional nozzle. Backed by a 12-month warranty
  • PRODUCT SPECIFICATIONS- Dimensions: 15.125" (384.18 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters) Weight: 21.5 lbs. (9.75 kilograms) Air compressor capable of 1.5 CFM is required (not included)
  • Forney Industries green color is a federally registered trademark and cannot be reproduced unless authorized by Forney Industries.
  • Click here for more information on Electronic Recycling Programs
  • Return Policy

Product Information

Internet # 304353914

Model # 251

Store SKU # 1003125677

Specifications

Dimensions: H 13.58 in, W 20.86 in, D 11.57 in

Dimensions

Product Depth (in.)11.57 inProduct Height (in.)13.58 in
Product Width (in.)20.86 in

Details

Duty Cycle (%)35Engine PowerElectric (AC)
IncludedTips, TorchInput Power (Volts)120
Maximum amperage output (amps)20Minimum amperage output (amps)5
Rated Output (Volts)120Recommended Cutting Capacity1/4"
Returnable90-DayWelder TypePlasma Cutter

Warranty / Certifications

Manufacturer Warranty12 months

Questions & Answers

6Questions
caret
Q:What is the torch part number IPT?
by|Feb 25, 2023
2 Answers
Answer This Question

A:  Please reach out us at Forney directly by calling 1-800-521-6038 for any questions regarding replacement part numbers. Thank you for your question!

by|Feb 27, 2023

    A:  I believe that they are refering to... Iron Pipe Thread, meaning that the part is threaded and is screwed in, in order to attach.

    by|Feb 26, 2023
      caret
      Q:For 20p consumables, you say to search HD for 85414 and 85755, but the only items that show at the HD website is 85677 and this is apparently for a different Forney machine. What is the issue?
      by|Sep 22, 2022
      0 Answer
      Answer This Question
      caret
      Q:Will this machine cut aluminium?
      by|Jun 7, 2021
      1 Answer
      Answer This Question

      A:  Yes, the Forney 20P (251) can cut aluminum. Due to the makeup of aluminum the cut capacity will be 3/16". Thank you for your question!

      by|Jun 7, 2021
        caret
        Q:Can I cut a 2 2/8 tubing joints with this plasma cutter?
        by|Apr 14, 2020
        1 Answer
        Answer This Question

        A:  As long as the wall thickness of this tube is not thicker than 1/4" you will have no problem cutting these with the Forney Easy Weld 251, 20P plasma. Thank you for your question.

        by|Apr 20, 2020
          Showing 1-4 of 6

          Customer Reviews

          4.7 out of 5

          • 4.7 out of 33 reviews
          • 100% recommend this product
          Filter by:
          Showing 1-10 of 33 reviews
          great for small jobs
          Cuts thin material pretty cleanly after some practice. Expect some dross on the underside of the cut once the thickness gets close to 1/8”. Left it sitting in the garage for a while. Worked just fine once I got the chance to use it again. For more serious use I would definitely get a more capable compressor and in-line water filters. I only use it for short cuts so the 6.5 gallon pancake compressor I use is fine.
          by
            • Recommended
            1 found this review helpful
            I received this cutter a couple of weeks ago and wanted to use it a little before writing my revi...
            I received this cutter a couple of weeks ago and wanted to use it a little before writing my review. The manual recommends a 30 amp circuit because the max output is 20 amps but my 20 amp circuit didn’t have any issues. The box mentions that it is generator friendly. I was impressed with how little slag this cutter leaves behind almost as if it is being cut with a saw. Be sure to follow the owners manual for the power and air requirements to insure optimal performance. This cutter includes a 6 foot power cord, an 8 foot ground cable, a 13 foot torch, and is very portable. I think this cutter will provide me with years of use at a reasonable price
            by
            • Recommended
            2 found this review helpful
            by
            • Verified Purchase
            Works well with my porter cable 6 gal 2.6 cfm...
            Works well with my porter cable 6 gal 2.6 cfm compressor. It’s small and very light.
            by
            • Verified Purchase
            by
              Works great out of the box. and cut well for...
              Works great out of the box. and cut well for a small plasma.
              by
                Awesome for up to 1/4 thick. Makes cutting metal so...
                Awesome for up to 1/4 thick. Makes cutting metal so easy and clean cuts.
                by
                  2 found this review helpful
                  Excellent tool for the price.
                  For the price you can’t go wrong! I’ve had it for almost 2 months and have cut the sides out of two shipping containers welded them together and then cut windows and door holes out with it. I’ve made some dumb looking art pieces with it and am about to start cutting chunks out of an old farm truck to restore it. It hasn’t given me an issue yet.. if you can run it off a 30 amp generator your cooking. I would buy it again.
                  by
                  • Verified Purchase
                  Easy to set up, easy to use. Compact
                  Easy to set up, easy to use. Compact
                  by
                  • Verified Purchase
                  • Recommended
                  Couldn't be more pleased with performance and ease of use....
                  Couldn't be more pleased with performance and ease of use.
                  by
                  • Verified Purchase
                  Showing 1-10 of 33 reviews