$1927
- Designed to fit up to three windows of stand size
- Designed with a pre-taped edge and a cylinder roll
- Heavy-duty plastic material for tight and clear shrinking
- View More Details
Product Details
Specifications
Questions & Answers
6Questions
Q:Does this actually prevent frost and ice from forming on the inside of the windows? And how is this different then other plastic window covering products because those did not prevent ice from forming.
by|Dec 28, 2022
1 Answer
Q:How do you remove the tape. Is it easy to remove and how thick and wide is the tape.
by|Dec 24, 2022
1 Answer
Q:Can i use this on a window with an air conditioner installed on the window?
by|Dec 13, 2022
1 Answer
Q:Can this be used on RV windows?
by|Nov 8, 2022
1 Answer
Showing 1-4 of 6
Feb 6, 2022
One way to reduce heat loss - not entirely clear
Frost King roll-out cylinder of heat-shrink material
Product of China
Even though we installed "Low E" windows, there are some days between October and May the cold from outdoors comes in.
The product comes in a roll-out installer w/ a cut-off edge.
I found it easier to use a box-cutter blade, since the windows are recessed.
The instructions are easy to follow, but omit the importance of having a clean window (obvious) and that the window frame/pane edge has completely dried (avoid condensation).
Hint - the double side tape should be "started" at the top to assist with the pull-off.
Second hint - a better hair dryer will make your project finish sooner (the one I used was a bit of a potato)
Third hint - wife feels the windows are a bit cloudy - I think it looks about the same as a window that hasn't been cleaned recently.
by
Jan 11, 2022
The easiest way to seal windows
We are big fans of Frost King's products and have been using them to seal some of the older, single-paned windows in our house for years now. It does a remarkably good job of keeping out drafts, and cutting down on excess condensation inside the windows too, but it can definitely be a little tricky to apply the 'old' way. This new roller system is perfect! The plastic goes up in a cinch and is very easy to trim once it's on the window.
by
Jan 9, 2022
Really easy
I love how easy to install this was. I didn't even need to bother my husband for a thing. I just needed a pair of scissors and my hair dryer.
Take double sided tape out of bottom of canister, apply to bottom and sided of window, leave top layer of tape attached still.
Bring film out of the little window on side of container and apply it the width of your window at the top. Fold it over the container a smidge and take the cutter at top of container and cut the film.
Remove top layer of the double sided tape, unfold and keep taunt the film and press it to the tape. Take hair dryer and use it to smooth out the film.
This provides a good wind and cold barrier. I am happy with this product.
by
Jan 7, 2022
Works great and easy to install!
The Frost King EZ Roll Window Insulation Kit comes with everything you need to insulate your windows. Included in the kit is the easy to roll, stick and unfold film, two rolls of double-sided tape and instructions. The tube includes a blade that makes it really easy to cut the film to the correct length. Our builder grade single hung windows are drafty and lots of cold air would blow in, making the house uncomfortable. The film in this kit is 62” tall and 126” wide, which means it can be used on 3-4 windows, depending on the size.
The film was easy to install, the double-sided tape stuck well to the cleaned vinyl window frame and the film. Once properly taped, the film creates a sealed air bubble against the window that stops the draft from blowing cold air into the room and it also provides an additional layer of thermal insulation. Now I can sit comfortably by the windows without feeling like they’re open all the time. The area by the windows is the same temperature as the rest of the room.
Most of the wrinkles came out with the hair dryer, making the film almost invisible. The film is clear, providing a clear view of the outside and the light can still shine though. I would definitely recommend this window insulation kit to anyone that has drafty windows, even if they have a new build. I will be buying more for the other rooms in the house, especially for the west facing windows, where we get most of our wind from.
by
Jan 5, 2022
O Snapsss, it's works.. Great
I have a bad air draft in both my restroom. And now it got cold in Texas .. O snapsss. It's cold when I shower. Sooo I got this EZ Roll Heat Shrink Window Film. Look at the YouTube video on how to install it. (Yes it's that easy to install ) So I did it and it works very good and very easy to install. On a side note. If you have rented property or help people out in need, I would recommend you get one of these kits, And keep it just in case of a broken window.. take a look at the pictures I taken. When I first installed the heat shrink Film..it was very wrinkled. But after the hair dryer. Is shrink to fit perfectly.
by
Jan 4, 2022
Really cuts down on drafts through my windows
I ordered this window draft-stopper kit without any great expectations, as I have watched my sister put a similar film on her windows a few years ago, and was convinced I'd never get it put on without help. However, not only are the directions easy to read (big enough for my not so great eyesight), but they are actually easy to follow. I had great success with the two windows in my home office, and will put it on more of my windows at a later time. The fit was very good for my windows as they're not huge. I just went step by step with the directions and really, the only difficult part was peeling the backing off of the two-sided tape. It was hard to get hold of. You do have to wait for it to be 32 degrees outside to put it on, so it took me a few days before I could try it. The wind is blowing very hard today, and as I was putting the film on, I could just feel the difference in the amount of air flow! I'm impressed.
by
Jan 3, 2022
Easy install window film insulation
Frost King Heavy Duty Window Film, sold by The Home Depot is great! It is perfect for my older drafty windows and will save me a ton on my heating bills. It is super easy to install and the built in cutting tool is very convenient. The material is very clear doesn’t restrict your view and almost invisible. In addition, I like that everything you need is in the tube including two rolls of double sided tape.
by
Jan 2, 2022
So easy!
We have a few windows we like to cover each year sadly, and normally I dread doing it but this dispenser made it so incredibly easy I don't think we'll buy the other ones anymore. It's so easy to start one side, and slowly pull it across your window or whatever you may be covering and slide the attached cutter down for the exact size you need, no more fumbling with the scissors or worrying about getting the right size.
by
Jan 2, 2022
Easy application
Well if you’re looking for solar and heat blocking for your windows without them looking tinted than I would recommend the Frost King Heavy-Duty Shrink Window Kit which says it is twice as strong as a standard shrink window kit. It has a pre-taped edge and a cylinder roll on applicator with a built-in razor for easy installation. The handle makes application a breeze. Window treatment saves energy. Fits up to 3 standard windows.
by
Jan 2, 2022
Comes with everything you need
We have older windows so I bought this to see if it would help at all with the cold. I like that it comes with everything you need for installation except for scissors. The top edge is pre-taped which is useful and it has a built in trimmer. It's 62" x 126" and should fit three normal windows. After you apply to the window, just use a hair dryer to shrink it up and get rid of any wrinkles.
by
Frequently Bought Together
Price:
$1927
Explore More on homedepot.com
Doors & Windows
Home Décor
Kitchen
