Product Details
Specifications
Questions & Answers
56Questions
Q:Can you paint these covers?
by|Jul 7, 2023
1 Answer
Q:Are these Magnetic on both sides?
by|Apr 19, 2023
2 Answers
Q:Is it safe to cover only half the vent ?
by|Apr 2, 2023
3 Answers
Q:Can this cover by cut?
by|Mar 9, 2023
2 Answers
Showing 1-4 of 56
5
423
4
132
3
70
2
76
1
313
Jan 16, 2023
I used this cover in ENTRYWAY. I also plan to...
I used this cover in ENTRYWAY. I also plan to use one in the Bathroom. I had planned to paint the entryway cover, but it’s “glossy” – and I guess that I’d need to “sand” it a bit, for the paint to grasp. There are no instructions about sanding and/or painting the cover. After Size-Trimming, I made a slit-cut for the Lever. I may sand/paint it another day, along with a better trimming.
by
Jan 16, 2021
Don't believe those 1 Star reviwers.
I purchased this product from the store and on The way home I checked reviews and was thinking this was a waste of money. Then I tried it anyway since It was cheap. Guess what! it does exactly what it says. Used it on my ceiling vent. And working perfectly.
Note:.
1 cut to size .
2 make holes for screws and the little lever.
3 make sure the vent is in closed position once done.
The sheet needs to sit flush..
by
Dec 13, 2020
I don't use them as vent covers. I put them on the wall, and I put my metal dies on them so I ca...
I don't use them as vent covers. I put them on the wall, and I put my metal dies on them so I can easily find them. They are dies for my die cutting machine, and they cling to the black side of the vent covers.
by
Sep 1, 2020
I use these vent covers as magnetic sheets to store my (metal) dies for craft projects. I have hu...
I use these vent covers as magnetic sheets to store my (metal) dies for craft projects. I have hundreds of dies for paper crafts - primarily card making and scrapbooking. I cut these to 10 inches put the dies on the dark side and the picture of what it is on the other side, then slip it in secure top sheet protectors to store in a notebook. I have about 25 notebooks. A lot of crafters use the vent covers as magnetic sheets for the same thing. I actually need to go buy some more!
by
Aug 9, 2020
ok
These magnetic vent covers work well enough on metal vents. I have a few vents that have been painted over and the covers do not stick well with that thin layer of paint.
by
Jun 23, 2020
They work as expected. Price is reasonable. Magnet could be a little stronger for some applicat...
They work as expected. Price is reasonable. Magnet could be a little stronger for some applications.
by
Jan 12, 2020
doesnt work with my vents
If your vents look like these, they aren’t magnetic and won’t work.
by
Mar 7, 2019
I don't understand some of these reviews. Take ANY magnet and put it up your vent. Does it stick?...
I don't understand some of these reviews. Take ANY magnet and put it up your vent. Does it stick? Then this product will work. It's not a strong magnet, so if your vent isn't already restricting the airflow, I can see how that might be a problem. Also, make sure to clean and let dry the surface you're putting the magnet on first. Cut and applied to my ceiling vent and works perfectly at completely restricting the air. Best $5 I've spent in a while.
by
Jul 8, 2018
After reading some reviews of this product, I was curious as to my actual need. But, for health r...
After reading some reviews of this product, I was curious as to my actual need. But, for health reasons, I went up and purchased a pack of three. Returning home, within a matter of a half hour, I had two installed where the need was greatest. the third, I placed in a handy spot in the garage. I must seriously question the truthfulness - OR - the mechanical abilities of the previous reviewers. Both of the units installed are working as advertised and, most importantly, as hoped for. Installation was about as easy as one can get. For a good fit, it is necessary to cut a couple of notches to fit over the screws -1/8 inch each. One other slit for the flow adjuster. THAT was IT! After a few of the previous reviews, I could only respond with "WHAT was the problem?" Oh...and you do have to recognize the magnetic side to place against the metal of the vent.
by
Sep 30, 2017
What a total waste of money. These are very thin and their magnetic capability is minimal. I put ...
What a total waste of money. These are very thin and their magnetic capability is minimal. I put these on wall vents and the edges lift off and curl away from the vent which completely defeats their purpose. Unfortunately I have not been able to find anything better--the thicker, higher quality ones that I bought several years ago apparently aren't available anymore.
by
0/0
Compare Similar Registers & Grilles
 | Exclusive | Best Seller |  | |
| Brand | Frost King | Everbilt | Everbilt | Decor Grates |
| Name | 15 in. x 8 in. Magnetic Grille Covers | 4 in. x 10 in. 1-Way Plastic Floor Register in White | 4 in. x 10 in. 2-Way Steel Floor Register in Brown | 4 in. x 10 in. Steel Floor Register, Oil-Rubbed Bronze |
| Price | $848 | $867 | $1297 | $1399 |
| Ratings | (1012) | (279) | (2532) | (793) |
| Maximum Duct Opening Length (in.) | 15 | 4 in | 4 in | 10 in |
| Maximum Duct Opening Width (in.) | 8 | 10 in | 10 in | 4 in |
| Installation Location | Wall | Floor | Floor | Floor |
| Decorative | Yes | No | No | Yes |
| Material | Plastic | Plastic | Steel | Steel |
| View Product | View Product | View Product | View Product |
Related Products
Explore More on homedepot.com