$8.48
- Helps save energy
- Magnetic
- Fits large side vents and can be cut to size
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details
Specifications
Questions & Answers
57Questions
Q:How many vent covers come in a package?
by|Oct 10, 2023
1 Answer
Q:Can you paint these covers?
by|Jul 7, 2023
1 Answer
Q:Are these Magnetic on both sides?
by|Apr 19, 2023
2 Answers
Q:Is it safe to cover only half the vent ?
by|Apr 2, 2023
3 Answers
Showing 1-4 of 57
5
433
4
132
3
70
2
78
1
317
Jan 16, 2023
I used this cover in ENTRYWAY. I also plan to...
I used this cover in ENTRYWAY. I also plan to use one in the Bathroom. I had planned to paint the entryway cover, but it’s “glossy” – and I guess that I’d need to “sand” it a bit, for the paint to grasp. There are no instructions about sanding and/or painting the cover. After Size-Trimming, I made a slit-cut for the Lever. I may sand/paint it another day, along with a better trimming.
by
Jan 16, 2021
Don't believe those 1 Star reviwers.
I purchased this product from the store and on The way home I checked reviews and was thinking this was a waste of money. Then I tried it anyway since It was cheap. Guess what! it does exactly what it says. Used it on my ceiling vent. And working perfectly.
Note:.
1 cut to size .
2 make holes for screws and the little lever.
3 make sure the vent is in closed position once done.
The sheet needs to sit flush..
by
Dec 13, 2020
I don't use them as vent covers. I put them on the wall, and I put my metal dies on them so I ca...
I don't use them as vent covers. I put them on the wall, and I put my metal dies on them so I can easily find them. They are dies for my die cutting machine, and they cling to the black side of the vent covers.
by
Sep 1, 2020
I use these vent covers as magnetic sheets to store my (metal) dies for craft projects. I have hu...
I use these vent covers as magnetic sheets to store my (metal) dies for craft projects. I have hundreds of dies for paper crafts - primarily card making and scrapbooking. I cut these to 10 inches put the dies on the dark side and the picture of what it is on the other side, then slip it in secure top sheet protectors to store in a notebook. I have about 25 notebooks. A lot of crafters use the vent covers as magnetic sheets for the same thing. I actually need to go buy some more!
by
Aug 9, 2020
ok
These magnetic vent covers work well enough on metal vents. I have a few vents that have been painted over and the covers do not stick well with that thin layer of paint.
by
Jun 23, 2020
They work as expected. Price is reasonable. Magnet could be a little stronger for some applicat...
They work as expected. Price is reasonable. Magnet could be a little stronger for some applications.
by
Jan 12, 2020
doesnt work with my vents
If your vents look like these, they aren’t magnetic and won’t work.
by
Mar 7, 2019
I don't understand some of these reviews. Take ANY magnet and put it up your vent. Does it stick?...
I don't understand some of these reviews. Take ANY magnet and put it up your vent. Does it stick? Then this product will work. It's not a strong magnet, so if your vent isn't already restricting the airflow, I can see how that might be a problem. Also, make sure to clean and let dry the surface you're putting the magnet on first. Cut and applied to my ceiling vent and works perfectly at completely restricting the air. Best $5 I've spent in a while.
by
Jul 8, 2018
After reading some reviews of this product, I was curious as to my actual need. But, for health r...
After reading some reviews of this product, I was curious as to my actual need. But, for health reasons, I went up and purchased a pack of three. Returning home, within a matter of a half hour, I had two installed where the need was greatest. the third, I placed in a handy spot in the garage. I must seriously question the truthfulness - OR - the mechanical abilities of the previous reviewers. Both of the units installed are working as advertised and, most importantly, as hoped for. Installation was about as easy as one can get. For a good fit, it is necessary to cut a couple of notches to fit over the screws -1/8 inch each. One other slit for the flow adjuster. THAT was IT! After a few of the previous reviews, I could only respond with "WHAT was the problem?" Oh...and you do have to recognize the magnetic side to place against the metal of the vent.
by
Sep 30, 2017
What a total waste of money. These are very thin and their magnetic capability is minimal. I put ...
What a total waste of money. These are very thin and their magnetic capability is minimal. I put these on wall vents and the edges lift off and curl away from the vent which completely defeats their purpose. Unfortunately I have not been able to find anything better--the thicker, higher quality ones that I bought several years ago apparently aren't available anymore.
by
0/0
Compare Similar Items
Maximum Duct Opening Length (in.) | |||
|---|---|---|---|
15 in | 10 in | 4 in | |
Maximum Duct Opening Width (in.) | |||
8 in | 4 in | 10 in | |
Installation Location | |||
Wall | Floor | Floor | |
Material | |||
Plastic | Steel | Steel |
Related Searches
Related Products
By not covering up your HVAC Return Grills and Vents, it's like leaving windows and doors open. Our insulated magnetic covers create a barrier around your returns eliminating heat loss and cold drafts during the winter when your central air conditioner is not in use. If you want to reduce energy costs and feel more comfortable then this product is for you.
The 150MW series is a 2-way air register, powder coated white, used for floor openings. The stamped face allows for 2-way air deflection. Our Smooth Glide technology ensures rattle free and quiet airflow from your central air system. Smooth Glide also provides for smooth opening and closing of your back dampers. Our high quality product will ensure years of continuous use.
The Everbilt E160MWP 4 in. x 10 in. White Plastic Floor Register features high-quality plastic used to cover floor vent openings. It has a simple design and easy to use plastic damper. Designed to promote proper airflow into your A/C system, it boasts a classic white powder-coated finish that completes the clean, sophisticated look.
Designed for floor openings, this Floor Diffuser allows you to control the airflow into a room for increased comfort. The smooth glide technology and rattle-free design ensures quiet airflow from your central air system. Made from high quality, powedercoated steel, this floor diffuser was built to last.