WeatherSide Purity Wavy 12 in. x 24 in. Fiber-Cement Siding Shingle (18-Bundle)

Replacement siding pieces are perfectly sized and have pre drilled holes for easier installation

just right to replace damaged asbestos shingles !!

Perfect match the old asbestos siding. Comes primed with a grayish tint. Great for replacing damage shingles when adding new window or door. Hard to tell the difference when all shingles are painted with the old shingles. The only negative is the price. Cost me over $300 to side a 4 by 3 enclosed porch that I converted to a powder room

Matched good. Not quite as textured as old siding but still looks good. Somewhat brittle, but it's the nature of it as well as the old asbestos one. Overall happy with how it turned out

Product is a good match to the old asbestos shingles. Couldn't have made the new windows look as good if we were unable to find these.

Arrived on time and in good condition. Perfect match to existing siding.

I didn't want to change the exterior of an old house I am remodeling, so I used this to replace some damaged siding and retain the house's original character.

It’s a great match and fit with older asbestos type siding. Was easy to install and cuts with a diamond blade in an angle grinder. Be sure to buy the recommended nails for installation. I’m glad that I did. I did have to predrill some holes before nailing. A good 1/8” bit lasted 4 boxes of siding.

The tile matched the 50 year old siding exactly. I used a wet tile saw to cut the tile to size. Very sturdy, not as brittle as I thought.

Excellent product and identical to the old asbestos shingles! We had a few cracked/broken shingles which we wanted to fix before getting our house painted - these did the trick and were fairly easy to work with. Bundles come with 18 shingles and the box weighs 53lbs. Shipping was very quick and actually arrived a day early! Product is a bit expensive but I'd gladly pay it again to save thousands on having to re-do the entire siding on my house. My house has flat/smooth wavy shingles however these come with vertical ridges. If you want the flat/smooth side simply flip them over and prime with exterior grade paint. These shingles come primed but only on the ridged side (as shown in the picture). To remove the old/broken shingles, I recommend using a dremel tool with a flat blade. Slide the blade up under the existing shingle and rip through the nails holding it in place. You should then simply be able to slide the shingle down and out. This will save you tons of time and avoids damaging other shingles using a hammer and flat bar. You should also wear gloves and a face mask since you will be working with asbestos siding. When sliding the new shingle into place, I recommend using 2-1/4" x 7 Trim Screws as opposed to nails. The screws will look identical to the nails once you paint and will also hold better. Use a soft headed hammer to shift the shingle as needed. If you need to cut the shingles, I recommend using the same dremel to do so. Be patient and let the dremel do the work. I simply traced the old shingles onto the new which worked really well. Overall, really happy and satisfied with this product! Highly recommended!!