Q-Line 30 Amp 1 in. Double-Pole Circuit Breaker

Yes you can use #6 wire with this breaker

Hello there Rock, thanks for contacting us. We recommend you contact GE Lighting at 800-435-4448. Even if they're unable to help, they can direct you to someone who can. We hope this gets you on the right track! - Guy@GEA

Hey Rock, we appreciate you taking a moment to reach out to us. For the best help, we recommend you contact GE Lighting at 800-435-4448. If they can't assist you, they will be able to direct you to someone who can. We're wishing you the best! - Guy@GEA

The THQP breakers can only be installed in the area that accepts the 1/2” frame “tandem” breaker. In some load centers, it could be every space. In the case of your panel, that would be in the lower 1/3 of the panel. Thank you for your question.

I don't understand your question...What box are you referring to?

Your panel needs to support 1/2" breakers for the THQP220, not all panels support these, but most have at least eight 1/2" locations, usually at the bottom of the panel. Take a look at the GE PowerMark Gold 200 Amp 32-Space 40-Circuit Main Breaker Indoor Load Center. Think of two adjacent full breaker locations that support four 1/2" breakers, the THQP220 breaker will use the two center locations and pick power form each power leg. The two outer 1/2" locations will be open and be available for two single 1/2" breakers. Take a look at the third customer image, see how the breaker fits into positions 28 and 30, positions 26 and 32 must then use a 1/2" breaker. The THQL2120 breaker will need two adjacent full breaker locations, which can actually be four of the adjacent 1/2" breaker locations.

Based on the math 1500 W / 120 V the amperage required would be 12 1/2 amps per unit. Please check with your local electrician for more details.