|Product Depth (in.)||2.35 in||Product Height (in.)||11.22 in|
|Product Width (in.)||4.84 in|
|Color Family||Bronze||Color/Finish||Oil Rubbed Bronze|
|Mount Type||Sink Mounted||Returnable||90-Day|
|Sink Accessory Type||Other|
|Manufacturer Warranty||Limited Lifetime|
A: It is dark bronze, you could almost call it dark brown. Personally I don't think it would match well with a black sink.
A: It fits into a standard sized hole in a sink.
A: Fits the standard size sink hole of 1 1/8 inch. Mike
A: You would need a 1-1/8” diameter hole for the Glacier Bay Curved Nozzle Metal Soap Dispenser in Satin Nickel.
A: No you don’t have to remove the bottle. The pump pulls out of the bottle so you don’t have to pull it out. It is held on by a nut that screws onto the top of the bottle.
A: For the Glacier Bay Curved Nozzle Metal Soap Dispenser in Oil Rubbed Bronze, the Product Webpage states: To refill soap, just pull out nozzle/head and tube and pour liquid soap into bottle neck; then replace nozzle/head and tube back into bottle to start use. Only the nozzle/head is removed and the bottle remains stationary.
A: The pump top just lifts off to replenish.
A: You just have to pull the pump handle up and it will Come out to fill it
A: Yes you have to crawl under the sink to refill it.
A: Not sure if you want the length of the top part only but it is approximately 4". However it doesn't pump after having it for 6 months. Would love a replacement for it.
A: It is about 6 or 7 inches tall but most of it is the reservoir thatbsits below the counter. About 2 or 3 inches above counter. The nozzle part is about 3 inches long
A: The Glacier Bay Curved Nozzle Metal Soap Dispenser in Satin Nickel is 2.75” tall off the counter and the spout extends 3” from the pump. The included bottle if 6” tall and fully assembled is 11” tall.”
A: The height above the sink is 2.25 inches about the sink and 8 inches below.
A: The dispenser height is 3 1/2 inches when installed