Ready to Assemble 66.5 in. W x 39 in. H x 20 in. D Hardwood Top Workbench

Hello as, the lowest overall height is 39 inches.

Hello, unfortunately the 66.5 inch workbench only comes in 20 inches deep. However, Gladiator does manufacture a 6 ft workbench (GAWB06HWEG) that comes 25 inches deep to place two cabinets underneath it.

Hi Taylor, the height clearance underneath the workbench 37 1/4 inches.

Hello Juce, Here are the box dimensions: Carton Depth 20 13/16 Carton Height 10 3/4 Carton Width 61 13/16

Hello Paul, Yes the Premier Series modulars will fit underneath the workbench but they are 25"D and will stick out from the front. The Ready to Assemble units are 18" deep and will fit underneath also.

Kat, The top is 1-7/16" thick.

It depends on what part of the leg you measure. There is an 45 degree angled flange at the top of the leg. If you measure from the edge of the flange where it makes contact with the wood surface, it is only 1/8" to the edge of the table. If you pushed the table against a wall, you would have a 1/4" gap behind the leg.

This is somewhat variable as the legs have levelers on them...7 5/8" is the gap I have and the levelers are pretty tight to the leg.

Hello RamPage, The Premier cabinets are not designed to fit under the Modular workbench, the Premier cabinets work better with the Adjustable workbenches as they are both 25" deep. The Modular workbench is only 20" deep and would fit the RTA(ready to assemble) cabinets better as they are 18" deep and these units would fit underneath with the wood top.