Best Seller

Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Fiberglass Reinforced Panels are an ideal wall liner for interior use in restaurants, kitchens, regrooms, break rooms, and any locations requiring low-maintenance, washable walls. Made of a durable polyester resin and reinforced with fiberglass, these panels provide a nonporous wall surface that resists moisture, mildew, stains and protects wall from dents and scratches. The durable Stabilit 32 sq. ft. Plastic Composite Siding Panel is made of polyester resin.
Nominal Product Length (ft.) | 8 |
|---|---|
Nominal Product Thickness (in.) | 1/8 |
Nominal Product Width (ft.) | 4 |
Total Coverage Area (sq. ft.) | 32 sq ft |
Board Joint Type | Square Edge |
|---|---|
Color Family | White |
Color/Finish | White |
Finish Type | Finished |
Installation Type | Fully Bonded Adhesive |
Interior/Exterior | Interior |
Material | Fiber Reinforced Polymer (FRP) |
Number per Package | 1 |
Paneling Appearance | Undecorated |
Paneling Features | Moisture Resistant, Rot Resistant, Scratch Resistant |
Paneling Profile | Flat |
Paneling Type | Decorative Panel |
Manufacturer Warranty | 10 Years Limited Warranty |
|---|
Hello Scott, Our FRP panels have little to no bend tolerance. They will snap or crack if you try to bend them significantly. For the best installation, we recommend applying the panels to a flat vertical wall surface only. Thank you, -Stabilit America
Hello Joyce, The finish is designed to be a non‐adherable surface. If painting is necessary, a high-quality epoxy or acrylic‐based paint is suggested. Thank you, -Stabilit America
Hello handy dandy, FRP panels can be installed with adhesive or rivets. For installation instructions, please check out our product brochure on our website below: https://www.glasteel.com/wp-content/uploads/2020/01/Glasteel-Combo-Brochure_9-11-13.pdf Also, Home Depot has put together a great FRP guide of their own. Check it out here: https://www.homedepot.com/c/ah/how-to-install-frp-paneling/9ba683603be9fa5395fab901f292fee3 Thank you, -Stabilit America
Hello Lenny, The front pebbled side is water resistant. The back side is not. Please be sure to seal all joints with a silicone based caulk for the best installation. Thanks, -Stabilit America
Hello Charles, all FRP products sold through Home Depot are for interior use only. The panels do not have a UV treating and will yellow and crack if exposed to sunlight for long periods of time. -Stabilit America
This product is rated for interior use only.
Hello Joseph, Yes, these panels can be applied to walls for showers. Remember to seal the joints with a silicone caulk then you should be good to go. Thank you, -Stabilit America
Hello Weight, One sheet of 4x8 FRP weighs roughly 24 lbs. Thank you, -Stabilit America
if wanting trim to join, what product do you buy
Hello Janice, Trim pieces are not required, however trim pieces give the panels a nice finished appearance. Thank you - Stabilit America
Viewing 1-8 of 855
4.6 out of 5