Internet #300252780

Model #THD40

4 ft. L x 5 in. W Stainless Steel Micro-Mesh Gutter Guard (10-Pack)

  • Stops leaves, pine needles and debris from collecting in gutters.
  • V-Bend Technology ensures superior rainwater filtration.
  • 10 pack of 4 ft pieces (40 ft total) plus screws for installation
  • See More Details

Frequently Bought Together

+
+
Price:
$9997

Product Overview

Gone are the days of climbing up ladders to clean your gutters. This Gutter Guard by Gutterglove keeps out leaves, pine needles, roof sand-grit and other debris from your gutter. The patented V-Bend Technology (VBT) design allows the system to filter rainwater more effectively than other gutter covers. There are no support mechanisms needed under this high performance VBT stainless steel micro-mesh gutter protection system. This allows 100% of the holes to filter rainwater coming down your roof and into your gutter.
  • Covers 40 ft. of gutter
  • Patented design that is easy to install by fastening and or with 3M VHB tape
  • Patented V-Bend Technology filters rainwater significantly better than its competitors
  • Each piece is 5.5 in. wide x 4 ft. long and can be used on 4 in. and 5 in. gutters
  • Oversized stainless steel micro-mesh wire for superior strength and durability
  • Innovative design prevents debris build up in gutters
  • UL approved for rainwater harvesting (NSF P151 and NSF 372)
  • Average home has 160 ft. of gutter



Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Gutter Guards & Strainers

current product
4 ft. L x 5 in. W Stainless Steel Micro-Mesh Gutter Guard (10-Pack)
Pro 4 ft. Plastic Foam Filter Gutter Guard for 6 in. Half Round (8-Pack)Pro FR 4 ft. Plastic Foam Filter Gutter Guard for 5 in. Half Round (8-Pack)4 ft. L x 5 in. W Stainless Steel Micro-Mesh Gutter Guard (20-Pack)
BrandGutter Guard by GuttergloveGUTTERSTUFFGUTTERSTUFFGutter Guard by Gutterglove
Name4 ft. L x 5 in. W Stainless Steel Micro-Mesh Gutter Guard (10-Pack)Pro 4 ft. Plastic Foam Filter Gutter Guard for 6 in. Half Round (8-Pack)Pro FR 4 ft. Plastic Foam Filter Gutter Guard for 5 in. Half Round (8-Pack)4 ft. L x 5 in. W Stainless Steel Micro-Mesh Gutter Guard (20-Pack)
Price
$9997
$11059
/package
$11990
/package
$13598
$169.97
Save $33.99 (20%)
Ratings
(6704)
(0)
(0)
(6704)
MaterialSteelPolyurethanePolyurethaneSteel
StyleSnap/Lock-InSnap/Lock-InSnap/Lock-InSnap/Lock-In
Gutter System ProductGutter GuardGutter GuardGutter GuardGutter Guard
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
5.5
Product Height (in.)
.375 in
Product Width (in.)
5.5

Details

Color
Stainless Steel
Color Family
Stainless Steel
Compatible Gutter Profile
Universal
Features
Rustproof,Snap/Lock-In,UV Stabilized
Gutter Part Type
Gutter Guard
Gutter System Product
Gutter Guard
Material
Steel
Product Weight (lb.)
.8 lb
Returnable
180-Day
Style
Snap/Lock-In

Warranty / Certifications

Manufacturer Warranty
10 years extended to 25 years with registration

Questions & Answers

243Questions43Answers

Are The Screws That Come With The Gutters "Stainless Steel"

Asked by Dtex November 21, 2020
4
Answers

The self-tapping screws that are provided with the kit are made of carbon steel, and they have a dacromet coating to prevent corrosion.

How difficult is it to install these gutter guards?

Asked by Pitdad November 7, 2020
10
Answers

These were relatively easy to install and are easy to handle as they are lightweight. The most awkward part was getting the leverage to screw them into the gutters while standing on a tall ladder. I did it on a sunny day so the shingles were soft enough to lift up without cracking them. I was able to easily trim down the pieces so they would overlap a little using tin snips.

Has anybody used these on a steel building with a steel roof? The steel roofing overhangs several...

Asked by Alby October 25, 2020
5
Answers

Good product and instructions with easy install.

WIll this work with a metal roof? Does it have to go under the shingles at the roof edge to hol...

Asked by JohnB October 24, 2020
5
Answers

I installed mine, went under the water proofing sheet, that is laid just under the metal roofing. i used the screws, so has to be secured.

Do you make them in dark brown

Asked by Denise October 23, 2020
5
Answers

These are aluminum edging with stainless steel mesh.

Do you have product in any store near Charlotte nc

Asked by Mac October 21, 2020
3
Answers

Good quality product. I placed some last year on one section of the gutters and it performed flawlessly so decided to cover the rest of the gutters.

How many are in a pack?

Asked by Kenny October 17, 2020
2
Answers

In the description, 3-pack of 4 ft lengths - total of 12 feet.

Can they fit over metal hanging gutters

Asked by Aj October 14, 2020
2
Answers

Not sure what metal hanging gutters are. If the the back edge can slip under the shingles or be fastened to the fascia board, they will work.

Any issues with ice or ice dams in winter?

Asked by Coldweather October 13, 2020
2
Answers

Not at all. It is quite sturdy.

Will this work on pine needles. Most of my trees are pines.

Asked by Mike October 4, 2020
5
Answers

Hi Mike: ABSOLUTELY! I installed GutterGlove on all the gutters on my house on Cape Cod. We are surrounded by pines. The mesh of this product is much finer than those pesky needles. There is no way for them to get through. Be sure to make a trough at the bottom edge. The needles will collect there and most will be blown off by the wind. Also, remember to overlap the 4' sections. Place the section on the prevailing wind side over the next piece so the wind doesn't blow the needles under the overlap. Some of my gutters used to get completely clogged with needles. No more. P.S. Not only does GutterGlove block needles, it will also block roof asphalt shingle grit.

4 ft. L x 5 in. W Stainless Steel Micro-Mesh Gutter Guard (10-Pack) - page 2

Customer Reviews

  • 6708 Customer Reviews
  • 4.8 out of 5 stars overall
98% of customers recommended.
Overall Ratings
5star-icon(5354)
4star-icon(1169)
3star-icon(84)
2star-icon(41)
1star-icon(60)
Sort By:
Excellent manufacturing, and in today's markets... that is worth the cost alone. Simple install, ...
Excellent manufacturing, and in today's markets... that is worth the cost alone. Simple install, took less than 3 hrs for the whole house. They work flawlessly and I no longer have to deal with cleaning out gutters or waterfalls from the gutters during rain storms.
Was this helpful?
2
0
Easy enough to install yourself and comes with good instructions. I took away a star because one ...
Easy enough to install yourself and comes with good instructions. I took away a star because one section was poorly manufactured. It was missing a crimp in the frame so the wire mesh was separated from the frame. I had enough good sections to complete the job.
Was this helpful?
3
0
Fairly Easy to install and work great to keep leaves out
I have had plastic gutter guards for 5 years. Decided to go with Stainless Steele this time. Really glad I did. These are just as easy to install as plastic and will never need to be taken down. The plastic ones sometimes would bow up and be visible from the yard. You can see from the photos these are almost invisible and being steel they will not bow. Also in the photos you can see ALL THE OAK leaves on the ground and then when you look at the gutter guards you don't see ANY on them.
Was this helpful?
6
0
Good But Not Perfect
The advertising claim of "Stop Cleaning Your Gutters for Good" is a bit misleading. There is still a bit of cleaning work to do to prevent water from overflowing the gutters. There is always a heavy rain in the fall that brings down the leaves. Some of those leaves will cover a portion of the gutter guards and cause water to miss the gutters. See the first picture below. You will have to brush leaves off the gutter guards once or maybe twice a year with a brush attached to a long pole to remove those leaves. (16 feet or more if you have a two story house) See the second picture below where the leaves have been removed with a brush. The good news is you won't ever have to get on a ladder to remove all the leaves and debris from the gutter. The gutter guards do a wonderful job of keeping junk out of the gutters. Your gutters won't clog, get full of water and overflow. Debris from the gutters won't flow into your underground drainage system and clog it.
Was this helpful?
10
0
Gutter Guard by Gutterglove 4'Lx6"W Stainless Steel Micro-Mesh (20 Pack)
I utilized these gutter guards on a straight commercial gutter with building having a metal roof and they worked flawlessly. Guards are heavy duty and very easy to install with the two way system of tape or self tapping screws, I went with the self tapping screws for ease of removal later if needed. Tape would require clean up and retaping if needed to be removed later, I did leave tape on for separation of stainless to aluminum. These guards tucked under metal roof with no bending or cutting of edge, just had to give more bend at edge to gutter to make lay flat on gutter. I have a metal brake for bending so bending guards was a breeze but I'm sure using a straight board and clamps would also work as pictured in the instructions. I choose these guards over others for these reasons, one plastic sags over time, two the longer length of 4' over 3', three stainless steel no rust issues, four aluminum edge, no corrosion. Living in the woods with oak trees that have tassels in the spring, acorns in the fall as well as leaves, I see in my future no more issues with having to clean my gutters. Only issue I can foresee is the oak tassels in spring may clog holes in screen but they recommend a brush clean every now and then, will have to wait till spring. I see no issues with sagging later due to the heavy duty stainless steel and aluminum edge construction and would recommend these guards to everyone with commercial gutters. Aluminum ladder for sale or trade!
Was this helpful?
2
0
Finally an answer to clogged gutters! I replaced the gutter foam inserts which had become caked ...
Finally an answer to clogged gutters! I replaced the gutter foam inserts which had become caked with moss and debris. Gutterglove is the bomb! Quality product and a lifetime solution! Installation was straight forward and they look great. Thanks!!
Was this helpful?
1
0
Effective leaf shield and easy install
Easy to install and effectively keeps out leaves. It took me about 6 hours to install about 136 linear feet. The fine stainless steel mesh keeps out leaves and even roof shingle granules. The aluminum edging was tough to cut through with tin snips.
Was this helpful?
5
0
Affordable solution to a potentially expensive problem!
Quality :
5
Value :
5
After 19 years at our home, we still had not conquered the battle of debris in our gutters and downspouts. We had already begun investigating our options for solutions, especially Gutter Glove, when we were randomly visited by a salesman for a company installing similar guards at a vastly inflated price. My hubby politely told him no thanks, and our search continued. Our biggest issue was trying to figure out which size we needed. After a bit of trial and error, we concluded that we needed the 5” gutters. They were perfect!! My hubby was still recovering from knee replacement surgery, so my son and I installed the Gutter Glove guards on the gutters in the rear of the house. Satisfied with the job they did when we experienced inclement weather from Hurricane Laura a day or so later, this we ordered another box so we could install them on the remaining gutters on the side and top of the house. I was able to install the guards over the majority of the remaining gutters, and we rented a 12’ A-frame ladder so our son could install the rest!! We’ve since returned the ladder, so short of climbing onto the roof, which I’m not feeling disposed to do, we’re not able to see how well they’re working. However, based on the performance of the first box we installed, we are resting easy that they’re doing the job as intended!
Was this helpful?
5
0
No More Pine Needles and Asphalt Rubble in my Gutter!
Quality :
5
Value :
5
Simple install - read the clear instructions, trim the end piece, and start sliding the panels under the shingle ends! Set the driver clutch lightly to avoid overdriving the self-tappers, and after several ladder moves, i was done... took longer to clean the old asphalt rubble and this year's pine needles than the install! Gutterglove's excellent customer service group reminded me that the 4' length is nominal and i was glad to have a few panels left over.
Was this helpful?
9
0
Easy Installation
Quality :
5
This product had all the features I was looking for to protect me from having to consistently clean out my gutters, especially the roof grit and leaves. This avoids the risk of me climbing a ladder as I get older. The 25 year warranty, allows rainwater cathment system and micro mesh was a plus! Have only had installed for a little over a week now.
Was this helpful?
6
0
Review this Product
Share your thoughts with other customers