#1 Home Improvement Retailer

Internet #300276095

Model #THD80

4 ft. L x 5 in. W Stainless Steel Micro-Mesh Gutter Guard (20-Pack)

  • Stops leaves, pine needles and debris from collecting in gutters.
  • V-Bend Technology ensures superior rainwater filtration.
  • 20 pack of 4 ft pieces (80 ft total) plus screws for installation
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Gone are the days of climbing up ladders to clean your gutters. Ideal for both commercial and residential applications, this Gutter Guard by Gutterglove keeps out leaves, pine needles, roof sand-grit and other debris from your gutter. The patented V-Bend Technology (VBT) design allows the system to filter rainwater more effectively than other gutter covers. There are no support mechanisms needed under this high performance VBT stainless steel micro-mesh gutter protection system. This allows 100% of the holes to filter rainwater coming down your roof and into your gutter.
  • Covers 80 ft. of gutter
  • Patented design that is easy to install by fastening and or with 3M VHB tape
  • Patented V-Bend Technology filters rainwater significantly better than its competitors
  • Each piece is 5.5 in. wide x 4 ft. long and can be used on 4 in. and 5 in. gutters
  • Oversized stainless steel micro-mesh wire for superior strength and durability
  • Innovative design prevents debris from building up in gutters
  • UL approved for rainwater harvesting (NSF P151 and NSF 372)
  • Average home has 160 ft. of gutter



Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Gutter Guards & Strainers

3 ft. L x 5 in. W Flex Fit Aluminum Gutter Guard with Stainless Steel Micro Mesh (25-Pieces Equals 75 ft.)
current product
Best Seller4 ft. L x 5 in. W Stainless Steel Micro-Mesh Gutter Guard (20-Pack)
3 ft. L x 5 in. W No Drilling Snap & Lock Aluminum Gutter Guard with Stainless Steel Micro Mesh (25-Piece Equals 75 ft.)4 ft. x 5 in. Clean Mesh White Aluminum Gutter Guard (25-per carton)
BrandBest-1 Gutter GuardsGutter Guard by GuttergloveBest-1 Gutter GuardsGibraltar Building Products
Name3 ft. L x 5 in. W Flex Fit Aluminum Gutter Guard with Stainless Steel Micro Mesh (25-Pieces Equals 75 ft.)4 ft. L x 5 in. W Stainless Steel Micro-Mesh Gutter Guard (20-Pack)3 ft. L x 5 in. W No Drilling Snap & Lock Aluminum Gutter Guard with Stainless Steel Micro Mesh (25-Piece Equals 75 ft.)4 ft. x 5 in. Clean Mesh White Aluminum Gutter Guard (25-per carton)
Price
Ratings
(23)
(7250)
(9)
(18)
MaterialAluminumSteelAluminumAluminum
StyleSnap/Lock-InSnap/Lock-InSnap/Lock-InSnap/Lock-In
Gutter System ProductGutter GuardGutter GuardGutter GuardGutter Guard
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
47.5 in
Product Height (in.)
0.375 in
Product Width (in.)
5.5 in

Details

Color
Stainless Steel
Color Family
Stainless Steel
Compatible Gutter Profile
Universal
Features
Rustproof,Snap/Lock-In,UV Stabilized
Gutter Part Type
Gutter Guard
Gutter System Product
Gutter Guard
Material
Steel
Product Weight (lb.)
.08
Returnable
90-Day
Style
Snap/Lock-In

Warranty / Certifications

Manufacturer Warranty
10 years extended to 25 years with registration

Questions & Answers

264Questions48Answers

Does the guard come pre-bent or will I have to bend it? Also, will it rust in a couple of years ...

Asked by skisom April 18, 2021
4
Answers

You have to fit it to your gutter and then bend if needed also this product is stainless steel / No rust

do pine needles get stuck upright in these?

Asked by steve April 7, 2021
6
Answers

Since we don't have pine trees in our yard, we will not be able to provide an answer to your question. The mesh is very fine so I am assuming the pine needles would not get stuck in the mesh. In addition, our gutters are very high so we cannot actually see the top of the gutter guards after they were installed. Hope you will be able to get a good answer from other homeowners who have installed gutter guards.

How to measure for correct size of gutter covers? 5" or 6"?

Asked by Jade April 7, 2021
4
Answers

Take a tape measure and measure the opening of the gutter from the top. That will tell you what size you need.

I'm confused by the photo samples on the Home Depot website. One photo shows Gutter Glove with a...

Asked by Joe April 5, 2021
9
Answers

It is flat, you bend it.

Does these work for half round gutters 4” or 5”

Asked by GutterBugs April 2, 2021
3
Answers

This should work just fine on the 1/2 round gutters. The guard can be shaped to meet the installation need the strips on the end may be screwed in (my preference) or there is a stick tape on the back. All that said I do not have the 1/2 round on my home, but I will add that I had gone through several different gutter guard brands and the Gutterglove has been the best by far. I am at 4 years and running on the guards without any issues and no more ladders climbing to clear the gutters or the other gutter guard brands I used. I do have to clear the valleys of sticks and other debris but my ladder time is minimal. These are very easy to shape and cut.

How to install

Asked by Mario April 1, 2021
5
Answers

This item comes with self tapping screws that you use to screw right into the gutter. I have a smaller gutter than this guard would cover so I bent it over to fit over the top. The lip that was created was used to secure it to the back of the gutter. These work great.

Hi I have 5 1/4 inch gutters. should I get the 5 or 6 inchgutter guards by

Asked by Kathy March 31, 2021
1
Answer

We recommend going with the 6" product. Our 5" product measures out to 5.5" wide and works for gutters 2" wide up to 5" wide.

Just bought two of the 4’x6” 80 foot boxes. Could I please get the sale price???

Asked by Weldon March 25, 2021
1
Answer

Thank you for your purchase! Reach out to your local Home Depot store where you purchased the product, or if purchased online contact 1-800-466-3337, to see about getting the sales price for your purchases.

anyone install with 4 in gutters ? looks like it would cause a hump along the gutter line in your...

Asked by Roadkingrick March 17, 2021
5
Answers

No

Does it comes with screws

Asked by Curious March 10, 2021
10
Answers

Yes. Plenty

4 ft. L x 5 in. W Stainless Steel Micro-Mesh Gutter Guard (20-Pack) - page 2

Customer Reviews

  • 4.8
    out of 7,253 reviews
  • 98% recommend this product
Filter by:
Showing 1-10 of 7,253 reviews
This Gutter Guards by Gutterglove works perfectly and was quick and easy to install. Not disappo...
This Gutter Guards by Gutterglove works perfectly and was quick and easy to install. Not disappointed at all!
by Disappointed
Read it all, good stuff here!
Very strong, comes with screws. These work great and nothing is going to take these off. I had lots of gutters to do and they were up high, real high. I decided to go with bending the back up close to 90°. If I had done down then it would have been way to hard to screw to the house because my gutters are to close to my roof and I got the 5" so going under the shingles would have been short and I just didn't like the idea. I tried lots of different ideas to keep 2 together laterally, I tried pre drill and rivet, I tried slicing and overlapping more, cutting it right off and more. I landed on what I think is the best. I used clear caulk, it did the trick. Used a bonding and really good, I used less than 1 tube on the whole job. I make my work bench and made 4 marks where I then lined up an untouched piece of gutter guard. I used a punch then went to the drill press and knocked out all the holes. Then I bent the backs up. I used some 1.5" screws for some of the back but mostly the small ones. Use a bonding type and
by Russ
5 people found this helpful
I installed my self and no little seads from trees not going true well done no more clean gutter ...
I installed my self and no little seads from trees not going true well done no more clean gutter thanks
by Borba62
After building a break to bend them to size. These are great. I installed these on my father's ho...
After building a break to bend them to size. These are great. I installed these on my father's house as his house is surrounded by pine trees. These completely stop pine needles from getting into the gutters.
by Jagermeister
3 people found this helpful
Collects debris. Water runs over. Leaves sit on top.
Collects debris. Water runs over. Leaves sit on top.
by chris
8 people found this helpful
Excellent manufacturing, and in today's markets... that is worth the cost alone. Simple install, ...
Excellent manufacturing, and in today's markets... that is worth the cost alone. Simple install, took less than 3 hrs for the whole house. They work flawlessly and I no longer have to deal with cleaning out gutters or waterfalls from the gutters during rain storms.
by JohnnyRotten
4 people found this helpful
Easy enough to install yourself and comes with good instructions. I took away a star because one ...
Easy enough to install yourself and comes with good instructions. I took away a star because one section was poorly manufactured. It was missing a crimp in the frame so the wire mesh was separated from the frame. I had enough good sections to complete the job.
by BlackBox
4 people found this helpful
Fairly Easy to install and work great to keep leaves out
I have had plastic gutter guards for 5 years. Decided to go with Stainless Steele this time. Really glad I did. These are just as easy to install as plastic and will never need to be taken down. The plastic ones sometimes would bow up and be visible from the yard. You can see from the photos these are almost invisible and being steel they will not bow. Also in the photos you can see ALL THE OAK leaves on the ground and then when you look at the gutter guards you don't see ANY on them.
by MikeSTL
8 people found this helpful
Good But Not Perfect
The advertising claim of "Stop Cleaning Your Gutters for Good" is a bit misleading. There is still a bit of cleaning work to do to prevent water from overflowing the gutters. There is always a heavy rain in the fall that brings down the leaves. Some of those leaves will cover a portion of the gutter guards and cause water to miss the gutters. See the first picture below. You will have to brush leaves off the gutter guards once or maybe twice a year with a brush attached to a long pole to remove those leaves. (16 feet or more if you have a two story house) See the second picture below where the leaves have been removed with a brush. The good news is you won't ever have to get on a ladder to remove all the leaves and debris from the gutter. The gutter guards do a wonderful job of keeping junk out of the gutters. Your gutters won't clog, get full of water and overflow. Debris from the gutters won't flow into your underground drainage system and clog it.
by PrettyHappy
14 people found this helpful
Gutter Guard by Gutterglove 4'Lx6"W Stainless Steel Micro-Mesh (20 Pack)
I utilized these gutter guards on a straight commercial gutter with building having a metal roof and they worked flawlessly. Guards are heavy duty and very easy to install with the two way system of tape or self tapping screws, I went with the self tapping screws for ease of removal later if needed. Tape would require clean up and retaping if needed to be removed later, I did leave tape on for separation of stainless to aluminum. These guards tucked under metal roof with no bending or cutting of edge, just had to give more bend at edge to gutter to make lay flat on gutter. I have a metal brake for bending so bending guards was a breeze but I'm sure using a straight board and clamps would also work as pictured in the instructions. I choose these guards over others for these reasons, one plastic sags over time, two the longer length of 4' over 3', three stainless steel no rust issues, four aluminum edge, no corrosion. Living in the woods with oak trees that have tassels in the spring, acorns in the fall as well as leaves, I see in my future no more issues with having to clean my gutters. Only issue I can foresee is the oak tassels in spring may clog holes in screen but they recommend a brush clean every now and then, will have to wait till spring. I see no issues with sagging later due to the heavy duty stainless steel and aluminum edge construction and would recommend these guards to everyone with commercial gutters. Aluminum ladder for sale or trade!
by CVarnerinPa
4 people found this helpful
Showing 1-10 of 7,253 reviews