#1 Home Improvement Retailer

Internet #202720958

Model #ST4401

Store SO SKU #1000544095

Unstained 0.3 in. Thick x 1/2 in. Wide x 48 in. Length Slip Tongue for Solid Flooring (10 pieces / carton)

$2260
/case
  • Changes direction when laying tongue-and-groove flooring
  • Great for difficult direction changes and intricate borders
  • Responsibly harvested oak hardwood
caret

Product Details

Slip Tongue changes direction in the laying of tongue and groove wood flooring. Made to fit solid hardwood flooring, it is ideal for those problem direction changes and intricate borders. This is proudly crafted in the USA from wood grown and responsibly harvested in the USA.
  • Wood Species: Real Domestic Oak Hardwood
  • 0.3 in. Thick x 1/2 in. Wide x 48 in. Length Molding
  • Unfinished Light Color
  • Construction: Solid Wood Slip Tongue Molding
  • Janka wood hardness rating/resistance to denting: 1290
  • Appropriate Grade for Installation: Above Grade, On Grade or Below Grade
  • Installation: Glue or nail down
  • Residential use
  • All online orders for this item ship via parcel ground and may arrive in multiple boxes
  • Check out our helpful buying guide to learn more about hardwood flooring.
  • Return Policy
  • California residents
caret

Specifications

caret

Questions & Answers

11Questions
caret
Q:Will this work with this 3/8" thick Engineered Hardwood? https://www.bruce.com/en-us/products/hardwood/turlington-american-exotics/engineered-hardwood/e4300ee.html
by|Sep 22, 2022
1 Answer
Answer This Question

A:  unless the groove on this product is 1/4", probably not it is about 1/4" thick and is designed to fit into the groove on a 3/4"thick piece of flooring. someone may make a slip tongue that may fit this product. it certainly is a great help by allowing you to reverse the direction of the flooring.

by|Sep 24, 2022
    caret
    Q:Does this work with Bruce 2 1/4 x 3/4 oak hard wood floor (American Originals Natural Red Oak 3/4in. T x 2-1/4 in. W x Varying L Solid Hardwood Flooring)
    by|Mar 25, 2022
    5 Answers
    Answer This Question

    A:  Yes, it should work fine in the flooring.

    by|Mar 26, 2022

      A:  Yes it works perfect 

      by|Mar 27, 2022

        A:  Yes, fit's Bruce 3/4 inch planks perfectly.

        by|Mar 29, 2022

          A:  yes

          by|Mar 27, 2022

            A:  yes this is a standard spline for reversing 3/4' T&G solid hardwood of any width and any manufacturer. It may or may not on engineered flooring

            by|Oct 25, 2022
              1 found this answer helpful
              caret
              Q:How many pieces are in a case?
              by|Dec 7, 2021
              0 Answer
              Answer This Question
              caret
              Q:it's so ridiculous that this isn't a stock item.
              by|May 30, 2021
              0 Answer
              Answer This Question
              Showing 1-4 of 11
              caret

              Customer Reviews

              4.4 out of 5
              (104)
              • 4.4
                out of 104 reviews
              • 86%recommend this product
              Filter by:
              Showing 1-10 of 104 reviews
              This product exceeded my expectations. Each tongue had the same quality, fit perfectly into the ...
              This product exceeded my expectations. Each tongue had the same quality, fit perfectly into the hickory plank, and maintained the integrity of the plank. My wood floor is seamless and looks great. I was reluctant that the tongue would not fit snugly, would not be high quality, and worse would not make my floor look seamless - none of that happened.
              by
              • Verified Purchase
              • Recommended
              Perfect
              I was going to make my own after reading some of the reviews, which complained that the size was wrong. But that's too much work compared to how inexpensive these are. So I took a chance. And they were perfect.
              by
              • Verified Purchase
              • Recommended
              1 found this review helpful
              This product made it very easy for me to change directions when installing hardwood floors in this room.
              When installing hardwood flooring there are times when you need to change the direction of the tongue and groove so you can change the direction of the installation. I needed to do this in three locations in this room: twice in closets and once when going around a corner. By inserting this tongue you effectively turn a grooved side of hardwood into a tongued side. This product fit snuggly into the hardwood pieces I was installing and I could not be happier with the results. It also helped that the product shipped out to me in a timely manner on a very time sensitive project.
              by
              • DIY
              • Verified Purchase
              • Recommended
              5 found this review helpful
              Easy and Seamless
              This slip tongue enabled us to branch off in both directions of one piece of wood. We used wood glue to keep it in place. Just don't try to nail it by the tongue. It doesn't work, glue does the trick just fine. Looking at our finished hard- wood flooring, there is no evidence of the slip tongue. Even though we know where it is, it is invisible.
              by
              • DIY
              • Verified Purchase
              • Recommended
              3 found this review helpful
              The specs don't really match, so as much as it's...
              The specs don't really match, so as much as it's not crap, they wouldn't service our requirements. We are dealing with 1/2 engineered flooring
              by
              • Verified Purchase
              Easy to use and did the job....
              Easy to use and did the job.
              by
              • Verified Purchase
              Rating provided by a verified purchaser...
              Rating provided by a verified purchaser
              by
              • Verified Purchase
              Other then a few bowed pieces it fit the flooring...
              Other then a few bowed pieces it fit the flooring I used great.
              by
              • Verified Purchase
              Rating provided by a verified purchaser...
              Rating provided by a verified purchaser
              by
              • Verified Purchase
              by
              • Verified Purchase
              Showing 1-10 of 104 reviews

              Frequently Bought Together

              Top Rated
              +
              +
              Price:
              $2260

              Compare Similar Wood Floor Trim

              1-7/16 in. x 3 ft. Oak Carpet Trim
              current product
              Top RatedUnstained 0.3 in. Thick x 1/2 in. Wide x 48 in. Length Slip Tongue for Solid Flooring (10 pieces / carton)
              Smoky Mineral/Flax/Natural Fossil 3/4 in. x 3/4 in. Wide x 78 in. Length Hardwood Quarter Round MoldingWinter Sky 0.445 in. Thick x 1-1/2 in. Width x 78 in. Length Hardwood T-Molding
              BrandTrafficMasterHARRIS WOODHeritage MillOptiWood
              Name1-7/16 in. x 3 ft. Oak Carpet TrimUnstained 0.3 in. Thick x 1/2 in. Wide x 48 in. Length Slip Tongue for Solid Flooring (10 pieces / carton)Smoky Mineral/Flax/Natural Fossil 3/4 in. x 3/4 in. Wide x 78 in. Length Hardwood Quarter Round MoldingWinter Sky 0.445 in. Thick x 1-1/2 in. Width x 78 in. Length Hardwood T-Molding
              Price
              $1327
              $2260
              /case
              $2998
              $3998
              Ratings
              (16)
              (104)
              (1)
              (0)
              MaterialWoodWoodWoodMaple
              THD SO SKU 10005440951000546583
              View ProductView ProductView ProductView Product