Store SO SKU #
A: It's 16 gauge 2 conductors.
A: 16 gauge
A: Please check the rating of your floor heater. If the rating is 13A or 1625W and lower, you can use this extension cord.
A: Do NOT use this type of extension cord with an electric heater. You must plug electric heaters directly into wall outlets.
A: Not sure what type of heater this is advertised with. Kindly advise what type of heater you mentioned.
A: Copper wire , After recently cutting one in half to make a short pigtail the wire is copper , plug prongs look to be plated brass , brass is usually what the prongs are made from. Can't tell what the plating is but usually it's Nickel.
A: This cord has stranded copper conductors. The type of lamp cord used in the construction of this extension cord is stamped as SPT-2 along the length of the lamp cord by the manufacturer of the lamp cord during the lamp cord manufacturing process to identify the specifications of the lamp cord and the manufacturer's UL listing registration number for their lamp cord products. A definition of SPT-2 lamp cord from the Internet. "SPT-2 Lamp Cord is designed for household appliances including clocks, radios, lamps, and fans. It has a 300-volt maximum voltage rating and features two conducting copper wires. Its two stranded copper conductors are insulated in PVC. SPT-2 Lamp Cord has thicker insulation than SPT-1 Lamp Cord."
|Name||6 ft. 16/2 Indoor Cube Tap Extension Cord, White||12 ft. 16/2 Cube Tap Extension Cord, White||12 ft. 16/2 Cube Tap Extension Cord, White||12 ft. 16/2 Cube Tap Extension Cord, White|
|Cord Length (ft.)||6 ft||12 ft||12 ft||12 ft|
|Maximum Amperage (amps)||13 A||13 A||13 A||13 A|
|Application||Light Duty||Light Duty||Light Duty||Light Duty|
|Number of Outlets||3||3||3||3|
|Number of Conductors||2||2||2||2|
|Voltage (volts)||125 V||125 V||125 V||125 V|
|THD SO SKU||145017||145033|
|View Product||View Product||View Product||View Product|