#1 Home Improvement Retailer

Internet #203741531

Model #HDXFN64

Store SO SKU #1000478108

Pneumatic 16-Gauge 2-1/2 in. Straight Finishing Nailer

  • Die-cast aluminum construction makes it corrosion-resistant
  • No-mar tip protects the complete work surface
  • Adjustable 360 exhaust port offers convenient use
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

The HDX Pneumatic 16-Gauge 2-1/2 in. Straight Finishing Nailer features a top loading aluminum magazine which is great for a variety of fastening jobs. The nail depth can be adjusted without the need of any tools to drive nails ranging from 3/4 in. to 2-1/2 in. The nailer is designed for convenience with a no-mar tip that helps protect work surfaces and a 360° adjustable exhaust port to stop exhaust air from blowing on you. The Pneumatic 16-Gauge 2-1/2 in. Straight Finishing Nailer is ideal for DIYers at home as well as professional construction contractors at the job site, and is covered by HDX's 1-year Limited Warranty.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Finishing Nailers

Pneumatic 16-Gauge Straight Finish Nailer with Carrying Case
current product
Pneumatic 16-Gauge 2-1/2 in. Straight Finishing Nailer
Pneumatic 16-Gauge 2-1/2 in. Straight Finish NailerPneumatic Finishing Kit with Fasteners (4-Piece)
BrandWENHDXHuskyHDX
NamePneumatic 16-Gauge Straight Finish Nailer with Carrying CasePneumatic 16-Gauge 2-1/2 in. Straight Finishing NailerPneumatic 16-Gauge 2-1/2 in. Straight Finish NailerPneumatic Finishing Kit with Fasteners (4-Piece)
Price
Ratings
(23)
(23)
(46)
(232)
Nail Gauge16161616
Power TypeAirAirAirAir
Nailgun Angle0000
Maximum Fastener Size3/4 in2-1/2 in3/4 in2-1/2 in
Minimum Fastener Size2-1/2 in1 in2-1/2 in3/4 in
ReconditionedNoNoNoNo
Cordless/ CordedCordedCordedCordedCorded
IncludedCase,OilNo additional components or accessories are includedNo additional components or accessories are includedNails
Compressor/Air Tool FeaturesAdjustable Exhaust Port,Fastener Depth ControlAdjustable Exhaust Port,Fastener Depth ControlAdjustable Exhaust Port,Fastener Depth ControlAdjustable Exhaust Port,Fastener Depth Control
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
3
Product Height (in.)
11
Product Width (in.)
12.5

Details

Air Tool Type
Air Nailer
Compressor/Air Tool Features
Adjustable Exhaust Port,Fastener Depth Control
Condition
New
Cordless/ Corded
Corded
Included
No additional components or accessories are included
Loading type
Strip
Maximum Fastener Size
2-1/2 in
Minimum Fastener Size
1 in
Minimum Recommended Air Delivery SCFM @ 90PSI
2
Minimum Recommended Operating Pressure (psi)
60 PSI2
Nail Gauge
16
Nailgun Angle
0
Power Type
Air
Reconditioned
No
Returnable
90-Day
Tools Product Type
Air Tool

Questions & Answers

11Questions10Answers

Can I use nail F-50?

Asked by Cesar June 29, 2020
0
Answers

can i use 18 gauge finish nails less than 2 inch in this nailer

Asked by David March 20, 2020
1
Answer

No, it is not recommended to use 18 gauge finish nails in this nailer.

Need to order a new latch. Where can I order parts?????

Asked by Randy February 20, 2020
3
Answers

According to HD customer service, you cannot order parts for HDX nailers. They should be considered as disposable items

I need a gasket for a HDX 16 gauge finish trim gun

Asked by Luis December 16, 2017
1
Answer

Cannot get parts for HDX nailers per HD. Considered disposible because of price.

Will it attach 2 3/4 inch oak boards together?

Asked by Monty November 1, 2017
0
Answers

CAN I USE THIS GUN TO NAIL 2 BY 4 LUMBER TOGETHER?? DEEP SET 2 1/2NAILS??

Asked by CHUCK August 4, 2017
1
Answer

This nailer will nail 2x4s together, yes. However it does not take the place of a framing nailer, so it depends on your particular project, what nailer you would need.

Can and if so where to buy O -Ring kit for this nail gun ?

Asked by tires May 5, 2016
2
Answers

Home Depot (1 800 customer service) advises you can't buy parts for the HDX nailers. Essentially they are disposable items. I only needed a driver blade, and further, the girl on the phone couldn't understand why anyone would want to buy replacement parts when they could just order a new unit! Speaks Volumes doesn't it!

Where can I find parts lists for the HDX air nailers?

Asked by repeters December 28, 2014
0
Answers

3/4" or 1" minimum length nail?

Asked by Melman November 11, 2014
1
Answer

Hi Melman, sorry for the confusion. Go with the manual, which states 1"-2 1/2". Check out page 7 of the use and care manual. http://www.homedepot.com/catalog/pdfImages/5a/5a3fae5f-597b-417c-a361-5f662c92bc64.pdf

the pneumatic 16- gauge straight finish nailer , does it use 2" and 2 1/2" nails

Asked by james October 4, 2014
1
Answer

It uses2"and 21/2"

Pneumatic 16-Gauge 2-1/2 in. Straight Finishing Nailer - page 2

Customer Reviews

  • 4
    out of 23 reviews
  • 79% recommend this product
Filter by:
Showing 1-10 of 23 reviews
Good gun lots of power driving 2 inch into fir
All material and fixtures from home depot turned out great
by Chuck
Sturdy and firm hold
Solid construction and build quality. The nailer is easy to use with any air compressor. Simple to use and looks great. It's a good size that fits in your palm nicely. I would definitely recommend this to anyone needing a nailer that is easy to use and has a good value.
by allthingsvu
4 people found this helpful
Haven't used it a ton, but seems solid.
Haven't used it a ton, but seems solid.
by Opa
A deal and a half, with great performance.
Item is a white label for Rigid. (I believe)... Had zero issues, altho, it's a bit of a pain to get the nails in. I will definitely buy HD white label again for any other tools and at 1/3 of the cost - yahoo :)
by MYOB
Made the job go so much quicker. Everything O expected...
Made the job go so much quicker. Everything O expected it to be.
by LISA
by JEREMY
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
I highly advise purchasing this tool. It is a GREAT PRICE and performed we...
I highly advise purchasing this tool. It is a GREAT PRICE and performed well for my 2 projects. It is lightweight, easy to hold and there were no nail jams. It worked well on my small compressor. I made a doll bed with a trundle bed underneath and a child’s rocking chair for my granddaughter.
by Bob
Right out of the box it leaked from O rings...
Right out of the box it leaked from O rings within the trigger assembly. I returned it.
by wjs
Great buy for the money. ...
Great buy for the money.
by JohnHomeowner
Showing 1-10 of 23 reviews