A: This is designed for HLB, HLA, RLDM and RADM Halo product families.
A: Yes, HL6 frame works with slope ceiling.
A: Please do just the tilt angle. Pre-set the light engine aiming (tilt) to the pitch of the ceiling slope by loosening the wing nuts for tilting and the brass thumb nut for rotation. Slope pitch markings are located on the side of the aiming bracket (2/12 to 12/12 pitch range). Tighten the nuts after completing the aiming.
A: There is a little bit of play in the “L” brackets, but not nearly 2” worth. You’ll need to add blocking to lower the brackets that much. I did something similar for my ceiling, and it worked well (once I got the depth from the joist correct).
A: For new construction, helps you get your rough electrical signed off. Also allows you to have light while you're in later construction phases prior to drywalling.
A: This is for new work applications, so you know where to cut the holes after sheetrock and grab the new work wiring. It really does help with layout, and you can just use a rotozip to follow the metal hole to cut out sheetrock to proper size.
A: If you have other temporary lighting you can probably get by without it. If you are using the lights for temporary lighting then the frames are very helpful. They can be used to locate the position in the ceiling before the drywall is installed so it is easy to run a drywall router around. They also will hold the connection box for can lights.
A: I used these in an unfinished area where I wanted to use led wafer lights. Also used in a finished area and the hangers came in handy when cutting out the holes for the wafer lights in the rock as the metal circle acted like a template. You can definitely get away without them though if using wafer lights probably just preference.
|Name||SPEX Lighting - 6 in. Black Reduction Ring for 4 in. Gimbal Recessed Fixtures||HL 6 in. Mounting Frame for Round and Square Canless Recessed Fixtures (6-Pack)||HL 4 in. Mounting Frame for Round and Square Canless Recessed Fixtures (6-Pack)|
Buy 4 or more $29.67
Buy 4 or more $29.67
|Parts & Accessories Type||Trim Ring||Mounting Frame||Mounting Frame|
|View Product||View Product||View Product|