Performance meets style with HALO's surface mount LED downlights.
Available in 5 dedicated color temperatures ranging from warm to cool: 2700K, 3000K, 3500K, 4000K and 5000K.
At 90 CRI (near sunlight quality), the colors and finishes in your home will shine.
Perfect for new construction, remodel and retrofit, the SMD model installs into recessed housings and junction boxes. Includes supply wire adapter and LED quick wiring adapter.
For HALO SMD4 and SMD6 (round and square models), you can choose from three finishes: white (paintable), satin nickel and tuscan bronze.
Installs directly into the ceiling with no junction box or housing required. The lights install flush to the ceiling for a clean and polished look.
For direct mounting, simply use the provided template to cut a hole in the drywall, connect wiring to the integrated junction box and place the fixture in the hole.
For more than 60 years, HALO has been the industry leader in high-quality recessed lighting.
Eliminate the need to replace bulbs. This LED lighting is maintenance-free, and made to last years.
Dimmable to 5% with many 120-volt leading-edge and trailing-edge phase control dimmers.
Suitable for use in showers or outdoors.
AIR-TITE certified fixtures can come in contact with insulation, helping you save energy by protecting against drafts.
Select HALO Recessed products include a 5-year limited warranty.
Not aware of any restrictions. Only CA can not use E26 adapter in E26 housing on new installations.
This fixture is a surface mounted type which could be surface mounted with the help of a junction box in the ceiling or it will retrofit into existing 5" or 6 " housings. If you are having just a hole in the ceiling, this will not work and you have to go for SMD Direct mount type. Model# would be SMD6S6950WHDM. Please use the below link to specification sheet for more details. http://www.cooperindustries.com/content/dam/public/lighting/products/documents/halo/spec_sheets/hr-smd6-dm-td518248en-sss.pdf
I suggest you to contact respective dealer from where you have purchased this Light fixtures with original purchase invoice.
Yes, this fixture is IC rated and fixture can touch the insulation
You can install this fixture in a junction box (existing housing is not required) or to an existing housing.
SMD series need 120V AC supply for the working while your existing lamp is of 12V. SMD will not work in place of your existing 12V lamp.
Require a standard round or rectangular box or can be retrofitted to a can fixture.
I'm not sure. The description says 3-1/2 or 4 inch. Not sure what a 3-1/2 box is. I have always heard 3 or 4 inch. It has been awhile since I installed them in my 4 inch octagon boxes and they were a pretty tight fit. They have a protrusion on the back that encases the electronics to drive the LED's that has to be to fit inside the box it is being mounted to.