Internet #302557078

Model #SMD6R6930WHDM

Store SKU #1002661402

Store SO SKU #1002624702

SMD-DM 6 in. 3000K Lens White Round Integrated LED Surface Mount Recessed Remodel Trim Kit

  • No housing or j-box needed with Halo canless recessed lighting
  • Canless LED lights ultra-slim design goes where can lights can’t
  • Recessed lighting suitable for use in both wet/dry environments
  • See More Details

Frequently Bought Together

+
+
Price:
$2998

Product Overview

Performance meets style with HALO's surface mount LED downlights.

Low Profile, High Impact

Performance meets style with HALO's surface mount LED downlights.

Available in 5 dedicated color temperatures ranging from warm to cool.

Choose Your Color Temperature

Available in 5 dedicated color temperatures ranging from warm to cool: 2700K, 3000K, 3500K, 4000K and 5000K.

At 90 CRI, the colors and finishes in your home will shine.

High-definition Optics

At 90 CRI (near sunlight quality), the colors and finishes in your home will shine.

The SMD is perfect for new construction, remodel and retrofit.

SMD (For Surface Mounting)

Perfect for new construction, remodel and retrofit, the SMD model installs into recessed housings and junction boxes. Includes supply wire adapter and LED quick wiring adapter.

Designer trims available for HALO SMD fixtures only.

Designer Trims (SMD Only)

For HALO SMD4 and SMD6 (round and square models), you can choose from three finishes: white (paintable), satin nickel and tuscan bronze.

HALO SMD-DM installs directly into the ceiling with no junction box or housing required.

SMD-DM (For Direct Mounting)

Installs directly into the ceiling with no junction box or housing required. The lights install flush to the ceiling for a clean and polished look.

HALO SMD-DM has a canless installation. Simply cut a hole, wire, and mount.

Canless Installation (SMD-DM)

For direct mounting, simply use the provided template to cut a hole in the drywall, connect wiring to the integrated junction box and place the fixture in the hole.

HALO has been the industry leader in high-quality recessed lighting for over 60 years.

HALO

For more than 60 years, HALO has been the industry leader in high-quality recessed lighting.

Eliminate the need to replace bulbs with LED lighting.

Long-lasting LED

Eliminate the need to replace bulbs. This LED lighting is maintenance-free, and made to last years.

Dimmable to 5% with many 120-volt control dimmers.

Dimmable

Dimmable to 5% with many 120-volt leading-edge and trailing-edge phase control dimmers.

Wet location - suitable for use in showers or outdoors.

Wet Location

Suitable for use in showers or outdoors.

AIR-TITE certified fixtures that can come in contact with insulation.

AIR-TITE

AIR-TITE certified fixtures can come in contact with insulation, helping you save energy by protecting against drafts.

Select HALO Recessed products include a 5-year limited warranty.

Warranty

Select HALO Recessed products include a 5-year limited warranty.

Halo Surface Mount LED Downlights (SMD) are ultra-low profile canless recessed lights with a modern look and high performance. SMD6-DM (6 in. LED recessed lights with spring clips) is designed for new installation into drywall, without any additional housing or junction box needed. Ultra-slim design goes where LED can lights can’t. Halo Recessed lighting is suitable for residential or commercial installations. LED recessed lighting is ideal for general areas, closets, storage areas, attics and basements.
  • Canless recessed lighting does not work with recessed cans or existing junction boxes (there is a junction box pre-installed on the light fixture)
  • 3000K soft white color temperature provides great light for any occasion
  • Designed for installation in many 7.38 in. round openings without junction boxes or recessed cans
  • Recessed LED lights are built to last with maintenance-free energy efficient LED’s, eliminating your need to use and replace bulbs
  • LEDs have 50,000 hours of life (equivalent to 22-years of life at 6 hours per day or 45-years at 3 hours per day)
  • Good brightness at 600 Lumens; recessed lights provide illumination to any room, great for 8 ft. -10 ft. ceilings
  • Lumen maintenance of L70 at a minimum of 50,000 hours (22-years)
  • 90 CRI, Title 24 compliant technology provides near sunlight quality light for true color rendering and consistency inside your home
  • Wet rated, recessed lights can be used in shower and outdoor light applications
  • Mid-power LED array provides a uniform source with high efficiency and long life for this Halo 6 in. LED
  • Durable, stamped aluminum housing provides thermal cooling to extend the overall life of the 6 in. recessed lighting fixture
  • When released, the spring clips will rest on to the back side of the drywall ensuring a secure fit
  • Continuous, flicker-free dimming from 100% to 5% (see "buying guide" for dimmer compatibility chart)
  • Closed cell gasket achieves restrictive airflow and wet location requirements without additional caulking
  • Non-electrically conductive polycarbonate frame
  • ENERGY STAR qualified for energy conservation
  • Click here to learn more about Eco Options and Energy Efficiency

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Recessed Lighting Kits

HLB 6 in. Selectable CCT New Construction or Remodel Canless Recessed Integrated LED Kit
current product
SMD-DM 6 in. 3000K Lens White Round Integrated LED Surface Mount Recessed Remodel Trim Kit
SMD-DM 6 in. Square Canless 3000k Color Temperature Remodel Integrated LED Recessed Light KitRA 6 in. Selectable CCT New Construction or Remodel Canless Recessed Adjustable Gimbal Integrated LED Kit
BrandHaloHaloHaloHALO
NameHLB 6 in. Selectable CCT New Construction or Remodel Canless Recessed Integrated LED KitSMD-DM 6 in. 3000K Lens White Round Integrated LED Surface Mount Recessed Remodel Trim KitSMD-DM 6 in. Square Canless 3000k Color Temperature Remodel Integrated LED Recessed Light KitRA 6 in. Selectable CCT New Construction or Remodel Canless Recessed Adjustable Gimbal Integrated LED Kit
Price
$2797
$2998
$3147
$3750
Ratings
(737)
(165)
(165)
(50)
Nominal Lens Aperture Size6 in.6 in.6 in.6 in.
Recessed Lighting TypeCanlessCanlessCanlessCanless
Compatible Bulb TypeIntegrated LEDIntegrated LEDIntegrated LEDIntegrated LED
New Construction or RemodelNew Construction,RemodelNew Construction,RemodelNew Construction,RemodelNew Construction,Remodel
Damp/Wet RatingDamp Rated,Dry Rated,Wet RatedDamp Rated,Wet RatedDamp Rated,Wet RatedDamp Rated,Dry Rated,Wet Rated
Trim TypeSurface MountSurface MountSquare,Surface MountGimbal
Indoor/OutdoorIndoor,OutdoorIndoor,OutdoorIndoor,OutdoorIndoor,Outdoor
View ProductView ProductView ProductView Product

Specifications

Dimensions

Actual Aperture Width (in.)
6
Housing Height (in.)
2.0
Maximum Cutout Size (in.)
6
Nominal Lens Aperture Size
6 in.
Product Depth (in.)
8.5 in
Product Height (in.)
2 in
Product Width (in.)
8.5 in
Trim Size (Width)
7.5 in.

Details

Actual Color Temperature (K)
3000
Color Family
White
Color Rendering Index (CRI)
90
Color Temperature
Soft White
Commercial/Residential
Commercial,Residential
Compatible Bulb Type
Integrated LED
Damp/Wet Rating
Damp Rated,Wet Rated
Features
Air Tight,Dimmable
Fixture Color/Finish
White
Fixture Material
Plastic
IC Rating
IC Rated
Included
Mounting Brackets
Indoor/Outdoor
Indoor,Outdoor
Integrated LED Type
Standard
Kit Type
Integrated LED
Lumens
600
Maximum Bulb Wattage
9.6
New Construction or Remodel
New Construction,Remodel
Package Quantity
1
Product Weight (lb.)
1.8 lb
Recessed Lighting Type
Canless
Reflector Finish Family
White
Returnable
180-Day
Style
Modern
Trim Type
Surface Mount
Voltage
Line Voltage
Watt Equivalence
65

Warranty / Certifications

Certifications and Listings
UL Classified,UL Listed,cUL Listed
Manufacturer Warranty
5 year limited

Questions & Answers

53Questions11Answers

Is there a cable length maximum? I have a strange issue, where it will not light up over the 15" ...

Asked by Baracuda March 22, 2020
1
Answer

We do not published the length of cable required. But please make sure that you should get the 120V in the junction box of fixture for the proper functioning. if the cable length is large, there may be voltage drop over the long length.

I'll make this simple: We have 8 of these installed on 2 separate circuits. Very easy to install ...

Asked by AJB March 13, 2020
2
Answers

I installed 8 lights on one dimmer with no flickering.

Is there a maximum thickness for the ceiling? I have plaster over plaster board lath, and it is ...

Asked by Sammy February 1, 2020
1
Answer

The light is spring loaded. It should fit. I no longer have the box but, I would go to your local Home Depot to get the answer you need.

Can these be placed underneath insulation?

Asked by Mark January 25, 2020
1
Answer

No, direct contact with insulation is permitted. Specification sheet available here: http://www.cooperindustries.com/content/dam/public/lighting/products/documents/halo/spec_sheets/hr-smd6-td518242en-sss.pdf

Can these lights be set to maximum brightness when installed without a dimmer switch? (I will be using an on/off switch

Asked by AJ July 23, 2019
1
Answer

If you install this without a dimmer - simply on a switch - you will get maximum brightness when you turn on the light.

can you piggy back 4 lights together on one switch

Asked by Thomas July 8, 2019
1
Answer

Yes, just connect ground to ground, white to white and black to black.

does it work with Lutron Caseta wireless dimmer?

Asked by mike March 19, 2019
1
Answer

Yes it does. I have mine hooked up to the Caseta system.

can these be installed into a ceiling with 1 1/4" thick drywall (double layer 5/8")?

Asked by OaklandNS January 29, 2019
1
Answer

My understanding is that the maximum ceiling thickness these will accommodate is 1 inch.

I have plastic vapor barrier between un-faced insulation and tong and groove wood ceiling. Can t...

Asked by kukumup January 16, 2019
1
Answer

John it should be fine under the vapor barrier .Im not understanding how your going to make your wire run without having to cut your plastic vapor do . unless your pre wiring before install it and then insulating the ceiling .

What is the CRI rating?

Asked by zazarack December 6, 2018
1
Answer

This light has a 90 CRI.

SMD-DM 6 in. 3000K Lens White Round Integrated LED Surface Mount Recessed Remodel Trim Kit - page 2

Customer Reviews

  • 165 Customer Reviews
  • 4.6 out of 5 stars overall
93% of customers recommended.
Overall Ratings
5star-icon(127)
4star-icon(21)
3star-icon(9)
2star-icon(0)
1star-icon(8)
Sort By:
I purchased 15 of these Halo SMD-DM led lights when remodeling our kitchen. Had them installed an...
Appearance :
5
Quality :
3
Value :
2
Ease of installation :
5
I purchased 15 of these Halo SMD-DM led lights when remodeling our kitchen. Had them installed and they are warranted to last 5 years. Well, here we are less then a year later and 2 of the lights are already burned out. I only turn on the lights when I’m in the kitchen and turn them off when I leave. Now I have to have them removed and ship them back to the manufacturer and see if they will stand by their warranty. Very disappointing.
Was this helpful?
3
0
We replaced 3 older fluorescent lights with them and are very pleased with the amount of light th...
We replaced 3 older fluorescent lights with them and are very pleased with the amount of light they provide. We added a dimmer which allows us to control the brightness.
Was this helpful?
1
0
Renovating / Updating
Fantastic item easy to use / install. I have installed over 20 square ones of these in my home and everyone compliments the updated look to my home. I even installed dimmers on the ones in the bedrooms and wet areas in the showers of the bathrooms. Recommend these items.
Was this helpful?
1
0
These lights are great because they don't require a can. However, they don't all sit flush with t...
These lights are great because they don't require a can. However, they don't all sit flush with the drywall (we have brand new drywall) and are somewhat loose. That's the only reason I didn't give them 5 stars.
Was this helpful?
1
0
The Halo SMD series lighting is a dream come true for renovators and new installers alike. This l...
The Halo SMD series lighting is a dream come true for renovators and new installers alike. This light is exactly as described online. The install was simple and the finished look is smooth and modern, with very clean lines. The projected light is a very evenly distributed flood pattern. I installed 3 of these on a 40' long exterior porch (8') ceiling where the available clearance above the fixture was only 2.5" These fixtures fit easily as they require only 2" above the light. The Eaton Corporation manufactures these lights, so I expect great quality. Time will tell whether these lights last for decades, as advertised. If so, this will be a great purchase.
Was this helpful?
0
0
Great lights! 5000kelvin is a bright white light. Canless design. Super easy to install. Dimme...
Great lights! 5000kelvin is a bright white light. Canless design. Super easy to install. Dimmer recommended.
Was this helpful?
1
0
Best lights on market far as I'm concerned.easiest I've ever installed.look great customers love ...
Best lights on market far as I'm concerned.easiest I've ever installed.look great customers love them.well done home depot
Was this helpful?
0
0
This item worked out great for my wife sewing room.
This item worked out great for my wife sewing room.
Was this helpful?
0
0
This is a great light for several reasons. First - it is an LED panel. Because it is LED it wil...
Appearance :
5
Quality :
5
Value :
5
Seeds Program Review
(What's this)
This is a great light for several reasons. First - it is an LED panel. Because it is LED it will last a life time and save money each month on the electric bill. Because it is a panel, it provides better light distributed than with other ceiling light formats. So, it gives the feeling that it is more like a 75-watt replacement rather than the 65-watt that it is rated at. Halo calls it optics. I call in good design, although I notice most panel lights provide good light distribution. Next - it is very easy to install if it is a new drywall installation. The makeup box is a part of the fixture with two Romex wire straps for house wiring connections. There’s also two conduit knockouts if you need them. It could be difficult to use this fixture as a replacement for a ceiling box mounted light. You will probably end up taking the box out to get the clearance you need. Lastly – and most importantly is the style of the fixture. It is an ultra-thin panel that is perfect for modern or contemporary homes. The thin bezel comes with a gasket to mask out any installation leaks. The fixture creates the impression that light just magically imitates from the ceiling.
Was this helpful?
0
0
SMD-DM 6.2 in. Lens White Round Integrated LED Surface Mount Recessed Ceiling Light, 3000K Soft W...
Appearance :
5
Quality :
5
Value :
5
Ease of installation :
5
Seeds Program Review
(What's this)
SMD-DM 6.2 in. Lens White Round Integrated LED Surface Mount Recessed Ceiling Light, 3000K Soft White (No Can Needed) is a completely easy option to install brand new ceiling lights with no hassle or replace your existing ones! ...a bit disappointed in our current lights as they appear to be the exact same mounting as this - BUT they are not (found out theyre simply light bulbs screwed into existing bulb soCkets and old plastic cover screwed into ceiling to hide the bulbs) - with that said, we need to re-wire/fix the current sockets so we can simply install the new light fixtures (instructions are really easy to follow so as long as you correctly measure the opening hole space this light is no hassle at all)
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers