Fernlake 5-Piece Taupe Wicker Outdoor Patio Dining Set with CushionGuard Chili Red Cushions

Some things were off with this set. I love wicker for its resilience and the metal table. Previous reviews mentioned the back legs of the chairs not hitting the surface flat, but when attaching legs two of the chairs were wobbly. You can clearly see in the picture that one is bent at a different angle(I had to use washers and furniture corks to make it stable). Also, all four chairs cannot be pushed under the table/ this is why I chose the legs to be on the outside so this could be possible but there is not enough room. And then as previous reviews stated, the cushions were almost impossible to fit in covers, you can see from the picture that it bubbles up because cushion is too big. And there are Velcro hooks on the cushion that has nowhere to attach to?. I would not buy anything like this again.

Hampton Bay Fernlake 5-Piece Patio Set is Very Well Made. Easy to assemble with very simple instructions. The Wicker covered a few of the treaded holes and I had a small phillips screwdriver to open them up. The Steel Frames on the Chairs and Table are Very Sturdy. The Slip Covers can take a little time to stuff the cushions into. Very Comfortable to sit on. Steel Table Top is pretty much maintenance free. Awesome Set.

We received our Hampton Bay Fernlake 5-Piece Taupe Wicker Outdoor Patio Dining Set. It came with CushionGuard Chili Red Cushions. It was a little hard to put the covers on the cushions. Also the cushions have velcro straps but there isn't anyway to use it on these chairs. They patio set came with all the fasteners and tools to put it together. Some of the fasteners for the chairs were made wrong or had too much paint where the allen wrench goes. I had to get some other fasteners. Other than than the chair legs went on pretty easily. The chairs look really nice. It seems like the back legs aren't engineered very well because they do not set flat on the floor. It was easy to install the four legs on the table. The table has adjustable pads so you can level the table so it doesn't rock. The table is sturdy and looks awesome. Bottom line is the patio set looks very nice but with a couple of design problems it will get a 4 star rating.

HAMPTON BAY FERNLAKE 5-PIECE TAUPE WICKER OUTDOOR PATIO SET is so lovely and comfortable. It seats 4 but you can find chairs that match if you need extra seating. It is very good quality. The heaviest wicker set I’ve ever seen. It should last for years. I couldn’t be more pleased with mine. It differently is high end and would look great on any patio.

Hampton Bay Fernlake Wicker Outdoor Dinning Set This outdoor patio dining set features 4 sturdy wicker chairs /w arms and thick cushions (that come in a variety of colors to choose from). The cushion fabric is acrylic and specifications state it is fade resistant & repels water, stains & spills. The wicker is weather resistant & wipes clean with a damp cloth and has a 3 year warranty (read details of coverage) It was pretty difficult to insert the 3in cushion into the cover because of all the loose threads that get stuck in the zipper .I will make sure they are all trimmed before I attempt the remaining cushions. Each cushion has velcro loops to “attach” somewhere, just haven’t figured that out yet. Another thing, maybe I’m being picky, but the rear legs are at an angle and do not sit flush on the ground, not sure how that will affect use. The dining table is made of a powder coated steel and is 48 inches wide by 28 inches high. It’s got slats on the top with an umbrella hole (needs an umbrella stand for underneath) The table is quite heavy so you’ll need two people to lift for assembly. We used the cardboard that this set came in to assemble most of the pieces. The allen wrenches and all the “bolts” are provided - but we did encounter holes not lining up with the legs on a few pieces. This product was packaged well to prevent damage. All in all, this patio dining set seems well made.

This is a very nice patio dining set. We've had other outdoor furniture and found that the photos and descriptions are sometimes misleading. That is not the case with this set. The colors and textures are exactly what we expected, the cushions are fairly firm (which is good) and fit the chairs perfectly, the synthetic wicker color works very well with frame color and the table is all metal and quite sturdy. The table did not sit level when we put it on the deck, but each leg has an adjuster on the bottom so it was easy to make the adjustments needed. The fabric on the cushions is a zip on "slipcover" which fits very snugly on the cushion. Because the fabric is removable and is available in several colors it will be pretty easy to wash the fabric if needed and the color can be changed if we want by getting another slipcover set. The table has a center hole for an umbrella and it has a flat disk cover for the hole if you don't use it with an umbrella. There is also an insert to use with an umbrella to hold the umbrella more securely and eliminate rattling when the umbrella is buffeted by a breeze. All in all a well designed set with many thoughtful features.

The Fernlake table and chairs are a great looking patio set. Assembly was easy. Just bolt the legs to the table and attach legs to the chairs. All the hardware is provided including a wrench and hex key. My set was short two bolts for the chairs but I called the number provided and they sent replacement parts right out. The cushion covers come separately and I had a little difficulty getting the covers aligned on the cushions properly. It would have been nicer if they sent the cushions already covered but I understand that sending them separately makes more sense since you have a choice of colors. This set is sturdy, heavyweight, well built and is very comfortable. The table legs have adjustable levelers in case you have an uneven surface. I like the look of the wide wicker straps and the mottled coloring really looks great! This is a quality set and looks it. I am very happy with my choice and look forward to enjoying it for many years to come.

A stout wicker set that looks sharp and is comfy to boot. Ships well-protected nested into one box for the table (about 55 pounds) and another for the chairs (about 125 pounds). Bolts together easily, tools included (but an impact driver with the right socket and hex fittings will make assembly MUCH faster). The chairs are quite sturdy, and the legs are clearly labeled to match with what corner they belong on. The table, being light-gauge metal, has a little wiggle; the feet include screw-out leveling feet; the leg brackets on mine left a couple legs at slightly different angles, but given the light-gauge metal, they were easy to match up. The outside ring of the table has a small irregularity where it was welded, but it's not significant. The chair cushions are very comfortable and the red covers are removable (they come separate), but the chair is even comfortable without the cushion. The "wicker" is a vinyl product, so it should hold up well in inclement weather, has enough variance to look very nice, and should drain easily after a power-washing that it should have no problem with. Looking forward to many years of enjoyable service.

This seems to be a good product. I like the chairs strength much better than the table. I'm only giving 4 stars because they sent the wrong cushion covers and only sent two and they are way to small to use. I did try to squeeze one cushion in but it was to no avail. It took about an hour to un box and put together. The chairs have 4 legs of course and three screws per leg, so that's 48 screws on the chairs and another 8 bolts on the table. They do provide an Allen wrench and a box/open end wrench for assembling, but that made it very tedious and time consuming. The chairs are very comfortable, but they did not sit right on all four legs and they should have had some kind of adjustability, but they don't. The chairs however seem very sturdy but the table is a little bit flimsy in my opinion. Also on the chairs, they each had screws that were a little difficult to screw in. The Wicker overlapped the holes and I had to get a screwdriver to pry them out of the way to insert the screws. Overall this set does look nice but I'm not really happy with the table and feel it should be stronger. Also I think it is priced a bit high and so did others who saw this after I set it up. This will be used as another set out on the pool deck as it is Rust and Fade Resistant and has a hole for an umbrella. I will be checking with Home Depot to see if they can send me the right Slipcover assembly set of 4 in the correct color.

This is a five piece patio set consisting of a table and four wicker chairs. The 48 inch diameter round table is made of steel. The steel construction does have a bit of a metallic sound, but it looks just like wood and should last a very long time. I thought being steel would make it very hot in direct sun, but that is not a problem even in southern California. It has four square steel legs that must be bolted to the table. I found many of the holes would not line up with the screws. This made assembling the table a bit frustrating. We had to drill a few of the holes a bit larger in order for the screws to pass through. Each of the four legs has a screw leveling adjuster that will keep your table from wobbling on uneven surfaces. At 48 inches diameter it will provide plenty of surface for four people to sit. Use the provided packing material to protect the surface of the table while installing the legs. The rear legs on the four chairs need to be redesigned in my opinion. The two rear legs are angled and the contact surface is not flat with the patio surface (See Photo). This will make the plastic leg tip wear quickly exposing the sharp steel edge of the leg which would damage a wooden deck or scratch a concrete patio. This would also make it very difficult to slide the chair back from the table while sitting in it. Many of the chair legs were difficult to install due to poor hole alignment. The four wicker style chairs all came in one box which weighed in at over 123 pounds. The table’s box was 57 pounds (See Photo). The seat cushions and Chili Red Cushion covers were nicely made. I quickly realized that because of the problem with the chair legs that this was not going on my patio. It arrived well packaged and damage free.