#1 Home Improvement Retailer

Internet # 315171664

Model # 438049

Store SKU # 1005910754

1/4 in. x 12 in. x 20 in. Birch Plywood (4-Pack)

$42.78
Limit 90 per order
/package
Apply Now
Pay $17.78 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Four (4), 1/4"-thick, 12" x 20" (nominal), plywood panels
  • Convenient ready-to-use materials for DIY home and decor projects
  • Features smooth, double-sided birch veneers, perfect for makers
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

Cut for convenience and creativity, Handprint's hardwood veneer plywood panels are as versatile as they are great-looking. Featuring clean, smooth, natural birch woodgrain on both the front and back faces, these handy 4-packs are perfect for a wide variety of home DIY wood projects and wood crafting projects - anywhere a beautiful, real-wood look is a top priority. Or if a natural finish isn't part of your plan, its smooth wood canvas surface is ideal for custom finishes like paint and stain. Loved by makers and DIYers alike, we take the hard work out of home projects - but leave all the satisfaction in.

Highlights

  • Actual dimensions: 0.22" x 11.8" x 19.8" Tolerance: +/- 1/8"
  • Weight: Approx. 1.3 lbs. each, 5.3 lbs./pack
  • Species: White or Yellow Birch Grade B2 (or equivalent) with a veneer core; TSCA Title VI compliant
  • Smooth, sanded, birch veneers on face and back; square-cut corners, perpendicular to edges
  • Unfinished wood crafts, ready to customize with the finishes of your choice, including paint, stain, vinyl decals, and sealant
  • Intended for indoor use only; if using outside, apply a weather-proof sealant and place in a covered or protected area
  • Due to the natural characteristics of wood, color variations between panels are normal and should be expected
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 315171664

Model # 438049

Store SKU # 1005910754

Specifications

Dimensions

Actual Product Length (in.)

19.81 in

Actual Product Thickness (in.)

0.22 in

Actual Product Width (in.)

11.8 in

Nominal Product Length (ft.)

1-5/8

Nominal Product Thickness (in.)

1/4

Nominal Product Width (ft.)

1

Details

Exposure Durability

Interior

Pack Size

4

Plywood Features

Paintable, Stainable

Plywood Product Type

Project Panels

Project Panel Type

Hardwood Plywood

Returnable

90-Day

Warranty / Certifications

Manufacturer Warranty

N/A

Questions & Answers

3Questions
caret
Q:How many Plies do these Project Panels have ? 3, 5, 7 or 13?
by|Jan 10, 2023
1 Answer
Answer This Question

A:  SwissyDaddy, The number of plies will vary depending on the tree but typically 1/2" will have 5-7 plies.

by|Jan 10, 2023
    caret
    Q:Can this be used on a laser printer?
    by|Jan 8, 2021
    2 Answers
    Answer This Question

    A:  AK, Unfortunately, we do have the expertise to advise you on that matter. You might want to take the specifications of the product to the printer manufacturer and see what is recommended. You might even do an internet search or put it out there for the maker-community to weigh in on. Best of luck with your creative endeavor.

    by|Jan 12, 2021

      A:  If you can feed 1/4" thick rigid material into your printer, it would possibly work.

      by|Sep 4, 2021
      caret
      Q:Solid core? Why is the 1' by 1' (model 373299) almost 2 times the cost per square footage as the 1' by 2' 9model 3273300)? Do you have this in 4x8 sheets of 1/4 inch thickness, and at what cost? Thank you
      by|Aug 3, 2019
      1 Answer
      Answer This Question

      A:  Is it because there are fewer cuts?

      by|Sep 5, 2023
        Showing 1-3 of 3

        Customer Reviews

        3.1 out of 5

        • 3.1 out of 13 reviews
        • 88% recommend this product
        Filter by:
        Showing 1-10 of 13 reviews
        Thin top layer
        Not good if you want your project to look good. A thin veneer top layer peels right off when cutting, sanding, or peeling off a paper pattern. I will be returning what I can, because I was trying to make scroll saw Christmas presents and this won’t work.
        by
          1 found this review helpful
          I have had a lot of time over the last year to dive back into my love of crafting. Since I have been making trivets and signs lately I have been needing more of a nice quality wood versus the rough stuff I get to use on my wood working projects. I took a chance and got the Dimensions brand Birch Plywood 4 pack as I thought it would be a good option for both kinds of projects and save me some time in the long run. The dimensions listed are ¼ inch x 12 inch x 20 inch so they are a good very easy to handle size. They came banded together so that they didn’t bang against each other and mar during shipping. They were nice and smooth on both sides as well as the edges for the most part. This is due to the thin veneer layer on both sides. It is technically 5 layers but 2 of those layers are the veneer. The label that is adhered on luckily is only on one panel and not all four as it may leave some residue or marks from removing it. As to be expected with most wood there is a slight bow to these pieces but it is nothing major in my opinion and can be easily worked with. I did notice when looking at it that 2 pieces were completely free of knots and 2 pieces had knots on both sides. For the purpose that I will be using them for it will be ok but for some that may be a drawback so keep that in mind when deciding. I did notice the picture on the label showed what looked like little serving trays or boxes which is something I had thought about making and would never have thought of using these for but was happy to have a little extra inspiration. It does say in the product description that these can be painted, stained or you can use polyurethane on them so that makes it really nice. I do a lot of paint washes with a clear sealer so I am hoping that it will take well on this surface. Overall I am very happy with these.
          by
          • Recommended
          If you are reading this review and you are shopping for a good quality, lightweight yet quite stu...
          If you are reading this review and you are shopping for a good quality, lightweight yet quite sturdy for its thickness, finished plywood, in my opinion this is a real nice option. Without hesitation, this one is my suggestion for those demands. It has a nice finish ready for staining, I did not stain it but I believe it would take a stain nicely and show off some nice grains. What I used it for (see pictures) is; I built shelves for organizing all my batteries for my tools. I first tested what its capability to hold batteries without center support. The shelves have all 15 batteries on it and I see no sag (see pictures). I figure there’s probably 20+ lbs of batteries on them and I am sure it will hold more. I created a center support between the boards and just glued the slats in. This was a great solution for me. One small thing it’s listed as ¼” thick as with all wood dimensions it’s actually 3/8” (see picture).
          by
          • Recommended
          1 found this review helpful
          This 4-pack of 1/4 inch birch plywood is a good product that will be useful for many smaller craf...
          This 4-pack of 1/4 inch birch plywood is a good product that will be useful for many smaller craft/woodworking projects where a large piece of wood isn't needed. What comes to my mind is small boxes, jewelry boxes or other similar uses. The quality was good within the 4-pack but all pieces had the all-to-familiar white wood filler on at least one side. Two pieces had fair-sized patches of filler on both sides. That was a little disappointing because if you plan to stain this wood the filler generally doesn't stain as well as the real wood. The sanded finish on most of the sheets was good and the edges and corners were cut square. This plywood is a 3-ply wood with the 2 outer plies being birch but the inner layer appeared to be a softer wood. That's not a big deal but there could be an issue if you wanted to use 23 gauge pin-nails to attach the sides together. Glue would definitely help and that's what I recommend. I do recommend this 4-pack of birch plywood if you want to work on small (maybe one-time) projects but you would be better served by buying larger plywood sheets if you are going to do more than one project. So it's pretty good quality wood but nothing special.
          by
          • Recommended
          I own a small travel trailer, Aliner Expedition and as I was looking at it I decided that I needed a small storage space for odds and ends. I had a spot where it would work but I would need to build the cabinet myself. I needed something light weight but yet durable that matched the interior color as much as possible I started looking for the materials and found the perfect answer. ¼” Birch plywood pre sanded, cabinet grade and pieces were almost the exact size I needed for the project so there would be very little waste. The plywood in this kit is high quality and great for crafts or projects like this. I can stain and varnish it to match the existing wood finish and it will serve my purpose Great. I chose a cherry stain and semigloss varnish.
          by
          • Recommended
          It's birch plywood! It's a 4-pack! It's the perfect size for a drawer bottom! I was hoping this p...
          It's birch plywood! It's a 4-pack! It's the perfect size for a drawer bottom! I was hoping this product would be a void-free plywood, with multiple thin lamination (like hobby-grade plywood) but it was more like a luan plywood. The faces are very clean with minimal defects, so make use in drawers and for other 3-D projects very nice. The surface is incredibly smooth, too. I was disappointed by the voids I found, but not disappointed enough to complain (except to you).
          by
          • Recommended
          1 found this review helpful
          I obtained the Dimensions 1/4 in. x 12 in. x 20 in. Birch Plywood for the shelves and dividers in...
          I obtained the Dimensions 1/4 in. x 12 in. x 20 in. Birch Plywood for the shelves and dividers in a paper sorter/storage rack that I am planning to build. The cuts on all of the pieces are nice and clean with very little chipping around the edges, and no manufacturing blemishes on the surfaces. All the pieces had a small degree of warping, but this is typical of 1/4” plywood and unless you want to use them as stand-alone surfaces that isn't really an issue. I was somewhat disappointed in that the product was slightly smaller in size than described. The product is described as 1/4” x 12” x 20”, but the actual dimensions are 3/16” x 11-3/4” x 19-3/4” (4.8mm x 502mm x 298mm). And, the sheets are advertised as five (5) layers, but the outer/top layer on both sides (veneer layer) is only a few mils thick. But, on a positive note, the sheets are equally smooth on both sides and the label came off without leaving behind any glue or residue.
          by
          • Recommended
          The Dimensions 1/4 inch X 12 inch X 20 inch Birch Plywood come in a pack of 4 sheets. The panels ...
          The Dimensions 1/4 inch X 12 inch X 20 inch Birch Plywood come in a pack of 4 sheets. The panels very in color and grain, some what, and may have some minor flaws such as a small knot. The plywood seems to be very strong for its thickness. The ones I received had some blemishes on one side but were clear on the other side and were slightly warped. The plywood has 5 layers. 3 inner layers make up most of the thickness with a very thin veneer on both the front and back sides. The panels could be used for a draw bottom as one of many possible uses. Can be cut with a scroll saw into shapes for craft projects. The plywood can be painted, stained or left natural with a clear sealer. The actual dimensions are 6 mm, 305 mm X 508 mm.
          by
          • Recommended
          by
            Does not cut well on my laser. Will not be...
            Does not cut well on my laser. Will not be purchasing again.
            by
            Response from UFPI RepresentativeMar 24, 2021
            We’re sorry to hear your expectations were not met. A representative will be in contact with you via email to discuss your issue. Thank you.
            • Verified Purchase
            Showing 1-10 of 13 reviews

            Compare Similar Items

            current item

            Nominal Product Thickness (in.)

            1/4

            1/4

            1/4

            1/4

            Nominal Product Width (ft.)

            1

            1

            1

            1

            Nominal Product Length (ft.)

            1-5/8

            1

            1-5/8

            1-5/8

            Project Panel Type

            Hardwood Plywood

            Hardwood Plywood

            Hardwood Plywood

            Hardwood Plywood

            Exposure Durability

            Interior

            Interior

            Interior

            Interior