#1 Home Improvement Retailer

Internet #203504324

Model #154148

Store SKU #958751

Birch Plywood (Common: 3/4 in. x 2 ft. x 4 ft.; Actual: 0.728 in. x 23.75 in. x 47.75 in.)

Limit 90 per order
  • Sized for easy handling, transportation and storage
  • Create gorgeous cabinets, furniture and craft projects
  • Strong and durable for long-lasting results
  • View More Details
Store
0 in stock
Text to Me
How to Get It

Frequently Bought Together

Top Rated
+
+
Price:

Product Overview

High-quality, veneered construction gives these birch project panels the structural strength, precision flatness and aesthetic beauty that any professional would be proud of. The decorative veneers are precision-milled, producing captivating woodgrains that showcase the beauty of natural wood. Birch is perfect for building cabinets, shelving, coffee tables, desks and any DIY home decor projects where the finished appearance is of top importance. The core is manufactured by alternating the grain direction 90-degrees per layer. This cross-layering method creates exceptionally strong, lightweight and dimensionally stable hardwood plywood with excellent toughness and excellent holding power for screws and nails. Veneers have an elegant, smooth finish, perfect for paint or stain and allowing for maximum customization. California residents: See Proposition 65
  • Ideal for a wide variety of DIY projects from home decor to utility repairs
  • Smooth surface makes it perfect for all kinds of custom finishes on crafts, hobbies and DIY projects
  • Sized for easy handling, transportation and storage
  • Economically priced for an extensive range of DIY endeavors
  • Panels are right-sized for convience, with less material leftover and/or wasted
  • Veneer core built with cross-layering technology
  • Can be cut, drilled, routed, glued, fastened and finished with ordinary woodworking tools
  • Hot-dipped galvanized or stainless-steel fasteners recommended
  • Counter-sinking screws is recommended to maintain a smooth appearance
  • For the cleanest cut, use an 80-tooth or higher table saw blade intended for cutting wood products
  • Common: 3/4 in. x 2 ft. x 4 ft.; Actual: 0.734 in. x 23.75 in. x 47.75 in.
  • Grade: B2
  • Each panel weights approximately 15 lbs.
  • Product may vary by store
  • Note: Product may vary by store.



  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Project Panels

3/4 in. x 2 ft. x 4 ft. PureBond Birch Plywood Project PanelBirch Plywood (Common: 3/4 in. x 2 ft. x 4 ft.; Actual: 0.728 in. x 23.75 in. x 47.75 in.)3/4 in. x 2 ft. x 8 ft. PureBond Red Oak Plywood Project Panel (Free Custom Cut Available)
current product
Top RatedBirch Plywood (Common: 3/4 in. x 2 ft. x 4 ft.; Actual: 0.728 in. x 23.75 in. x 47.75 in.)
BrandColumbia Forest ProductsHandprintColumbia Forest ProductsHandprint
Name3/4 in. x 2 ft. x 4 ft. PureBond Birch Plywood Project PanelBirch Plywood (Common: 3/4 in. x 2 ft. x 4 ft.; Actual: 0.728 in. x 23.75 in. x 47.75 in.)3/4 in. x 2 ft. x 8 ft. PureBond Red Oak Plywood Project Panel (Free Custom Cut Available)Birch Plywood (Common: 3/4 in. x 2 ft. x 4 ft.; Actual: 0.728 in. x 23.75 in. x 47.75 in.)
Price
$3708
$4859
$7253
Ratings
(29)
(15)
(535)
(214)
Nominal Product Thickness (in.)3/43/43/43/4
Nominal Product Width (ft.)2222
Nominal Product Length (ft.)4484
Plywood FeaturesPaintable and StainablePaintable and StainableStainablePaintable and Stainable
Weather ExposureInteriorInteriorInteriorInterior
Engineered Wood TypeHardwood PlywoodHardwood PlywoodHardwood PlywoodHardwood Plywood
View ProductView ProductView ProductView Product

Specifications

Dimensions

Actual Product Length (in.)
47.750 in
Actual Product Thickness (in.)
0.73 in
Actual Product Width (in.)
23.75 in
Nominal Product Length (ft.)
4
Nominal Product Thickness (in.)
3/4
Nominal Product Width (ft.)
2

Details

Engineered Wood Type
Hardwood Plywood
Plywood Features
Paintable and Stainable
Shape
Rectangular
Span Rating
16 oc
Weather Exposure
Interior

Warranty / Certifications

Manufacturer Warranty
See store for details

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.3
    out of 214 reviews
  • 74%recommend this product
Filter by:
Showing 1-10 of 214 reviews
This Birch plywood to be just as good as the 4' x 8' sheet product. There are only small gaps in ...
This Birch plywood to be just as good as the 4' x 8' sheet product. There are only small gaps in the plies, making it suitable for painted cabinetwork. The quality of one side is slightly better than the other, so there is a clear front versus back of the sheet. However, I feel the pricing is painfully ridiculous. I was working on a project where I estimated I needed 3 sheets of 4x8 plywood, and ran just a bit short. (I neglected to count the two shelves you can see behind the frosted glass in the picture.) The 4'x8' sheet of the same material costs $56. This 2'x4' piece is a quarter sheet of plywood, but costs about half as much as the full sheet. If I had room in my small shop, I would have bought the larger piece. I don't, so I had to bite the bullet and pay the jacked up price.
by
  • DIY
  • Verified Purchase
1 person found this helpful
Making a coffee table. Wood looks great stained. Still working on it. Picture is not a completed ...
Making a coffee table. Wood looks great stained. Still working on it. Picture is not a completed project.
by
  • Verified Purchase
  • Recommended
1 person found this helpful
Boards are not cut evenly.
Bought two panels for a corn hole bosrd. Both ends that has the sticker were 23 3/4. Opposite end was a full 24 inches. Had to drag out my table saw to cut. Would have been cheaper to purchase a full sheet of plywood and cut it myself since i had to drag out my saws ultimately, the birch material is ideal for the corn hole bags to slide
by
    • Recommended
    Easy cutting and great finish
    Easy cutting and great finish
    by
    • Verified Purchase
    • Recommended
    It was not warped or damaged. The board was used for cabinet doors which were eventually painted.
    It was not warped or damaged. The board was used for cabinet doors which were eventually painted.
    by
    • Verified Purchase
    • Recommended
    Used board as a table top for this modern saw...
    Used board as a table top for this modern saw horse desk. Mainly using for sewing and laptop use. I have had it up for about 4 weeks now, and so far, no warping!
    by
    • Verified Purchase
    I was really wanting a solid board to replace a table top. I thought this nicer plyboard would d...
    I was really wanting a solid board to replace a table top. I thought this nicer plyboard would do the trick. Unfortunately when it was cut and routed the edges peeled and there were holes in the side.
    by
    • Verified Purchase
    4 people found this helpful
    This picture shows both the Birch plywood, and the Mahogany....
    This picture shows both the Birch plywood, and the Mahogany. I used the wrong picture on another review.
    by
    • Verified Purchase
    I made a table leaf out of this board and it came out great. I went heavy on the stain in order ...
    I made a table leaf out of this board and it came out great. I went heavy on the stain in order to achieve the desired color.
    by
    • Verified Purchase
    • Recommended
    4 people found this helpful
    Hmmm, I've never reviewed a piece of wood before, let's see. . . This is not the first time I hav...
    Hmmm, I've never reviewed a piece of wood before, let's see. . . This is not the first time I have purchased this piece of plywood, it is my go to choice for mounting datacom gear on a wall, especially concrete walls. I always find the finish to be smooth on both side and the edges to be pretty clean. I could go with a cheaper piece of plywood, but I prefer the clean, finished look of this birch plywood. Word to the wise, never mount a sheet of plywood directly to a concrete wall, in this case, I have 3 2x4 boards on the back, 1 down the center and one down either side. It is also mounted to the wall only by the lower half so that the gear would be at eye level; I used 2" deck screws to attach the plywood to the boards and then used 1/4" by 4" Tapcon screws to mount it all to the wall.
    by
    • Pro
    • Verified Purchase
    • Recommended
    Showing 1-10 of 214 reviews