Internet #205480159

Model #700100

2 in. x 8 in. / 2 in. x 10 in. Ramp Top Kit Pair

  • Turns 2 x 8 boards into sturdy ramps
  • Ideal for loading small vehicles or large appliances
  • Customer recommended (see reviews)
  • See More Details

Product Overview

The HIGHLAND ramp kits allow you to turn ordinary 2 in. x 8 in. boards into sturdy, rust-proof, all-purpose ramps. No need to worry about angle cuts as these kits are easy to install and use. The included self-stick protective pads keep your tailgate scratch free.
  • California residents
  • 700 lb. capacity
  • Super strong, top quality extruded aluminum kits
  • Installation hardware included
  • Protective pads included
  • Quality tested and approved
  • 2 pieces per package

Specifications

Dimensions

Drive surface width (in.)
8
Product Length (in.)
8.3
Product Width (in.)
10.2

Details

Material
Aluminum
Product Weight (lb.)
3.46
Returnable
180-Day
Total Weight Capacity (lb.)
700
Tread
Yes
Weight Capacity (lb.)
700

Warranty / Certifications

Manufacturer Warranty
90 days limited

Questions & Answers

16Questions36Answers

Do these come as a set as shown or are they sold individually???

Asked by Bucky July 30, 2015
6
Answers

Set of two in box.

ARE THESE RAMP TOPS BOTH 8" WIDE?

Asked by ED May 27, 2016
5
Answers

Yes

Are the nuts, bolts, and washers included? If not, what size bolt? Is it metric?

Asked by Mo January 4, 2019
5
Answers

Everything was included. Works great. Very satisfied.

Can these be used to build a ramp for a shed?

Asked by redsstress February 23, 2016
5
Answers

Yes. These can be used wherever you need a ramp. Be sure to block the ends of the boards to prevent the ramp from moving off the top step, flooring, etc., during frequent use.

what angle are the ramps? Also which size boards would you use with these?

Asked by Support November 9, 2016
3
Answers

There is a chart on the mounting instructions on the box.....I went a bit shorter and no issue for me. Used 2x10x10' with my tall 4x4 trunk....dont remember the height but no issues for me.

So do you need 2 sets of the to make a set of ramps or one set at $20 to

Asked by Trucker84 December 8, 2016
3
Answers

set is two ramps....so only need one set.

What type of wood and what length is recommended to reach a pick-up truck bed?

Asked by Bill August 7, 2017
3
Answers

My pickup is a short bed 4 wheel drive. Because I take ramps with me in the bed of the truck they are only 6.5 feet long. That means when I use them the incline is pretty steep. 8 foot boards would be much better giving a lesser incline making it easier to roll stuff up.

what is a length of the board for a regular Tundra truck?

Asked by luigy June 1, 2016
2
Answers

That would depend on the height of the tailgate, weight of the items being loaded, and how they will be loaded (driven, loaded with a 2 wheeled hand truck, etc). All of these factors need to be considered in determining the length of the ramps.

Are 8' long 2x8's long enough to unload a riding mower from a Dodge Ram 4x4 without scraping the mower deck when loading

Asked by JohnJ August 30, 2016
2
Answers

I used 10 footers and didnt scrape on my John Deere.

Can you purchase these in your retail store?

Asked by atasa October 6, 2016
2
Answers

I did ship to store and about 3 or 4 days picked it up.

2 in. x 8 in. / 2 in. x 10 in. Ramp Top Kit Pair - page 2

Customer Reviews

  • 50 Customer Reviews
  • 4.7 out of 5 stars overall
97% of customers recommended.
Overall Ratings
5star-icon(36)
4star-icon(12)
3star-icon(2)
2star-icon(0)
1star-icon(0)
Sort By:
Ramp It
Quality :
5
Value :
5
Seeds Program Review
(What's this)
I really like this set of ramp ends, the cast aluminum is well made, they are sturdy and strong. They come complete with all the bolts and nuts needed to attach them to your 2" x 8" x 8' boards. Once completely attached simply cut the boards to the proper length to make the ramps customized to your vehicle. If have an 8' bed on your truck you may need to cut off just enough that they will fit in the bed with the tailgate up. Cutting the boards to short will make the ramps too steep, creating a dangerous condition.
Was this helpful?
8
0
4 Star Review
Rating provided by a verified purchaser
Was this helpful?
0
0
Inexpensive, easy to assemble, easy to use....
Inexpensive, easy to assemble, easy to use.
Was this helpful?
0
0
The work great. A lot better than buying a...
The work great. A lot better than buying a set of ramps.
Was this helpful?
0
0
The whole process from ordering and delivery to the store,...
The whole process from ordering and delivery to the store, to pick up and installation was painless and the product was excellent. Great quality, easily installed, and came complete with all necessary hardware. Thanks.
Was this helpful?
0
0
Ok.
Ok.
Was this helpful?
0
0
I wish these were stocked in the stores. At one time, they were. They make excellent ramps for an...
I wish these were stocked in the stores. At one time, they were. They make excellent ramps for any kind of shed project. They also work well for truck bed ramps. All that you need is a piece of 2x8 and some strapping for the sides to keep things from rolling off the edges. If you want, or need extra stiffness, simply put a 'strong back' or perpendicular 2x3 underneath the 2x8. Looking lengthwise, it will have the shape of the letter ' T '. This will greatly stiffen longer ramps. For shed type projects, you will rarely need to do this though.
Was this helpful?
0
0
Ramp review
Directions not clear as to installation but otherwise good product.
Was this helpful?
0
0
5 Star Review
Rating provided by a verified purchaser
Was this helpful?
0
0
Ramps
Ramps worked well for my application Would buy agan
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers