#1 Home Improvement Retailer

Internet #100154309

Model #4092-06

Store SKU #764676

20 oz. Wall Orange Peel Low Odor Water Based Spray Texture

  • Low-odor, water-based formula cleans up easily
  • Adjustable nozzle matches your desired spray pattern
  • Use to patch small rooms and walls in occupied areas
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

The Homax Products 20 oz. Aerosol Spray Texture is a great choice for patching and texturing small rooms and accent walls in occupied areas like schools, offices and health facilities. Designed to patch orange peel and splatter textures, this versatile texture matches fine, medium and coarse textures. The low-odor, water-based formula cleans up easily with soap and water.
  • Water-based, low-odor formula
  • Patches orange peel and splatter textures
  • Ideal for use in occupied areas, including schools, offices and health facilities
  • 20 oz. Can provide coverage for up to 110 sq. Ft.
  • Flat sheen
  • Click here to see Home Depot's spray paint buying guide
  • Actual paint colors may vary from on-screen and printer representations



  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Container Size
20 Ounce
Coverage Area (sq. ft.)
110 ft²

Details

Aerosol / NonAerosol
Aerosol
Base Material
Water Based
Coating Product Category
Prep/Finishing & Care
Color Family
Whites
Color/Finish
White
Dry to touch (min.)
30 min
Interior/Exterior
Interior
Kit
No
Number per Package
1
Paint Type
Interior Paint
Paint/Stain Clean Up
Soap & Water
Paint/Stain Features
Pattern spray adjustment,Primer Required,Textured
Paint/Stain/Waterproofer Product Type
Wall & Ceiling Spray Texture
Returnable
90-Day
Sheen
Flat/Matte
Substrate/Surface Use Type
Drywall
Transparency
Solid

Warranty / Certifications

Manufacturer Warranty
Limited lifetime warranty. See details.

Questions & Answers

33Questions46Answers

How many sq ft will this cover?

Asked by AZNate February 20, 2021
6
Answers

AZNate, It comes down to your skill level and the amount of texture you desire. I always to a small test area to (1-2 sf) and then proceed. Light texture 30 to 50 sf. Heavy texture 20 to 30 sf.

Besides from a vanity use, does it provide any other benefits? Insulation? Sound reduction?

Asked by Jeff December 1, 2020
7
Answers

Not really. This is intended to be painted after application, so you still have a hard surface for any sound to bounce off of. You could apply rigid insulation panels (they come in 4x8 sheets) on the interior wall surface, unless you have the $ for actual professional sound deadening material?

What is the difference between this and peo grade?

Asked by PT October 29, 2020
3
Answers

As far as I am concerned COST!

i have done plenty of drywall complete jobs and repair. lm getting ready to paint inside my house...

Asked by tom September 20, 2020
3
Answers

Tom, On some patches (especially bigger) you should apply a PVA primer (seals the drywall) before applying a paint or paint primer. It may just require a second coat of paint and you may have to do a larger area or even the entire wall...

The water base when applied is discern able after the paint dries. I make sure to use water base ...

Asked by Greg September 12, 2020
2
Answers

You need to apply the texture before the primer and the paint. After you get the texture you are looking for then let it dry. After it is dry then primer and paint. Your primer should cover the texture color of white, unless your primer is white, if it doesn't then apply another coat of primer of get a better primer. Then paint.

What product can you use to primer the wall before adding the wall texture?

Asked by sammy23 May 23, 2020
5
Answers

The Mosel was broken and made a mess. What a waste of $20.00. Now I will have to redo the job.

If you use can how long it last to be used again

Asked by Rick February 1, 2020
5
Answers

I emptied the entire can on this project.

what is the coverage for one can

Asked by Kenny November 19, 2019
5
Answers

Nothing- it was so bad could not even use.

CAN I USE THE ABOVE ON CIELINGS?

Asked by JASCO September 16, 2019
5
Answers

Yes. Please wear eye and face gear.

The product oozes out in big globs, as if there's not enough pressure to create a spray. What am I doing wrong?

Asked by David September 8, 2019
5
Answers

Hi David, please call us at 1-800-441-9695 for more information.

20 oz. Wall Orange Peel Low Odor Water Based Spray Texture - page 2

Customer Reviews

  • 3.6
    out of 1,137 reviews
  • 66% recommend this product
Filter by:
Showing 1-10 of 1,137 reviews
Not a well developed product
Followed all the recommendations before applying. Shake the can for 2 minutes, soak in warm water for 20 minutes and test on cardboard. End results: nozzle keeps falling off, spray is not consistent in application, just splatters on in the finest setting. I have used the standard, solvent based version before with good results. This one does not smell, but it does not work either. Do not purchase. Put up with the smell of the solvent spray and get decent results.
by Wayne
Response from Homax Customer CareDec 28, 2020
Wayne, we apologize for your trouble with the spray texture and are here to help you complete your project to your satisfaction. Please contact us at 800-729-9029 for support. Homax
awesome
as usual, I read all reviews and took all advise I could get. decided to spray with nozzle set on heavy by comparing image on bottle with pre existing texture. Prepared walls perfectly and dust free. put cardboard box upright against wall , shook bottle vigorously for 2 minutes, then sprayed against card board box and when I liked the texture pulled box away and sprayed actual wall. had to do that in 3 rooms so everything was prepared well ( taped off etc) and I just went from room to room. I didn’t need to clean bottle within jobs. Waited a whole day to paint and I honestly cannot tell where repairs are. I recommend this product! Please wear a mask though and make sure u can vent room and close door for a while.
by Sybille
4 people found this helpful
Very pleased. You do have to place the can in warm water before use like the instructions say an...
Very pleased. You do have to place the can in warm water before use like the instructions say and run the nozzle under hot water now and then to clear it. Out of 3 cans, I only had one that was a little temperamental and had to run under hot water more often but it was the last one and I was working in the kitchen so it wasn't a big deal.
by DIYWoman
1 person found this helpful
Useless product for all but smallest of repairs
Tried to use this to texturize trim surrounding a new shower enclosure, and it’s useless. Forget about the square footage claims on the can, this product only has enough aerosol to last for maybe five minutes. The product came out at times watery, and other times too thick, despite vigorous shaking during use, and applying at room temp. I do wonder if storage temp or shelf time in the store affects the results, since it seems some customers had a good experience. For me, it was just a mess. Luckily, my light paint color compensated enough for me to forego starting over. It’s not about the money, it’s about the wasted time and effort. In hindsight, I would’ve happily given the manufacturer, or anyone really, the $12 to discourage me from using this terrible product.
by Dave
Response from Homax Customer CareJan 23, 2020
Hi Dave, we are sorry to hear about your negative experience with our spray texture. We recommend putting the can in a hot water bath for 15-20 minutes to loosen up the material and add pressure. This will sometimes help unblock anything that may be in the tube. Sometimes through shipping or storage the product can be frozen, or get too hot, and that may affect pressure in the cans as well. We want you to continue to texture in the future and do it with ease, so please give us a call at 1-800-729-9029 between 8am-5pm ET so we can further discuss and help you. Homax
2 people found this helpful
Oh my goodness, this stuff works great! I was really hesitant, novice that I am (and a senior cit...
Oh my goodness, this stuff works great! I was really hesitant, novice that I am (and a senior citizen) but if you follow all the instructions (the video was very helpful), it works like a charm. I used it over a wall patch to cover an old telephone jack receptacle, as well as to cover a section where an old backsplash was removed. Worth the money to do it myself rather than hire a handyman. I’m a fan!
by GatorGram
2 people found this helpful
Hard to get a fine orange peel affect
The can comes with an adjustable nozzle to change from coarse to fine texture. but, when I needed a fine texture, I was unable to get a consistant fine spray. if I held the can to close there was too much material coming out. if I held the can too far away, too much of the material flopped to the floor never making it to the wall. It seemed like there needed to be more pressure behind the flow. the bottom line is I got uneven results.
by Scaramanga
Response from Homax Customer CareMay 1, 2019
Hi there, you need to shake vigorously for a few minutes before using. Also, a hot water bath for 15-20 mins will sometimes loosen up the material to add pressure and help unblock anything that may be in the tube. Sometimes through shipping or storage, the product can be frozen, or get too hot, and that may affect pressure in the cans as well. We want you to continue to texture in the future and do it with ease, so please give us a call at 1-800-729-9029 between 8am-5pm ET so we can further discuss and help you. Homax
3 people found this helpful
Product was easy to use. Followed directions on can and watched the on line video. Low odor as it...
Product was easy to use. Followed directions on can and watched the on line video. Low odor as it's water based.
by Camaroholic208
1 person found this helpful
Was easily able to apply and did just what it suppose to
Was easily able to apply and did just what it suppose to
by debbie
2 people found this helpful
After shaking for at least a minute as instructed I I did a test spray. Looked great. I started s...
After shaking for at least a minute as instructed I I did a test spray. Looked great. I started spraying my wal and the button broke off, next thing you know I had this frothy mess on my sanded and smooth Sheetrock. Looks terrible. Now I need to figure out how to get this stuff off and start over . I’ve never had this happen with any other texturizer. Lousy, will not by again
by auntacic
Response from Homax Customer CareSep 27, 2018
Hi there, So sorry to hear that your project turned into a mess. Please give our technical experts a call at 1-800-729-9029 between 8am-5pm ET for further help. Homax
6 people found this helpful
First time using a texture can. Worked great. Happy I did it myself. Good even coverage and ver...
First time using a texture can. Worked great. Happy I did it myself. Good even coverage and very adjustable.
by Bob
2 people found this helpful
Showing 1-10 of 1,137 reviews