A: Hi Barb, Yes, we do have the Double Rod Brackets available in the Mix and Match program. Here is the link for Oil-Rubbed Bronze : https://www.homedepot.com/p/Home-Decorators-Collection-Mix-and-Match-1-in-Double-Curtain-Rod-Bracket-in-Oil-Rubbed-Bronze-3-Pack-U-ORBBOJM05/206981102
A: Hi Cindy, Thanks for the detailed question but we can only reply in a general type of way. The answer depends mainly on the weight of your curtain panels. When using 2 end brackets we recommend max. 20 lbs. (@ 10 kg.) and with 3 brackets max 33 Lbs. (@15kg) total weight limits; this is when properly installed in the correct positions, under normal conditions, and with properly secured anchors and screws. You may exceed these limits slightly if you have good strong material you are installing the brackets into, but these are our general recommendations for your reference.
A: I would say yes you do need the middle (center) bracket. We have a 8 ft wide sliding door and that is only part I do not like about it, we always have the center area with the curtain. It seems like it would bow in the area since it is a long space. We never tried without it.
A: Hi Deb, Sorry we do not sell these end caps separately.
A: Hi Cheryl, Our length indicated is the suggested window width the rod will fit. If you absolutely cannot accept 2” on top of 36”, you would have to use a pipe cutter to trim off the rod side (WITHOUT the screw nut), and would still need both rods (small rod inserted into the large rod) since each rod only has one screw nut installed. Hope that helps in your case.
|Exclusive||Best Seller||Top Rated||Top Rated|
|Brand||Home Decorators Collection||Home Decorators Collection||Home Decorators Collection||Home Decorators Collection|
|Name||36 in. - 72 in. Mix and Match Telescoping 1 in. Single Curtain Rod in Brushed Nickel||72 in. - 144 in. Mix and Match Telescoping 1 in. Single Curtain Rod in Matte Black||72 in. - 144 in. Mix and Match Telescoping 1 in. Single Curtain Rod in Gunmetal||36 in. - 72 in. Telescoping 1 in. Single Curtain Rod Kit in Brushed Nickel with Ball Finial|
|Finish Family||Brushed Nickel||Matte Black||Gray||Brushed Nickel|
|Rod Diameter (In.)||1 in||1 in||1 in||1 in|
|Product Width (in.)||1.52 in||1.52 in||1.52 in||44.77 in|
|Finial Included||With Finial||With Finial||With Finial||With Finial|
|View Product||View Product||View Product||View Product|