Sea Wind 48 in. Indoor/Outdoor White Ceiling Fan

Beautiful product, delivered to my front porch ahead of schedule. I hired an electrician to install them (2) and it took about an hour each. The light fixtures were out-of-stock so I added a "mountain" front porch light.

This is for the model 59268 Anslee bronze fan. Installing the fan body was a piece of cake. Installing the light kit was a pain. You have to thread the screws thru a jungle of wires a seen in the photos. If you install this yourself just beware.

I love the fan but the remote is a nightmare. Save yourself the hassle and just get the fan. If you install the remote, you can only use the remote and the light switch is then useless.

We installed this fan in my daughter's bedroom and she loves it. The design is simple and the three speeds provide a good range of air flow. Assembly was pretty easy and once we had the electrical in place, installing it was easy.

This remote came in a bundle. It is a universal remote, very easy to install just above the motor. No need to run any extra wires. Perfect for my lanai because I was able to wire my new fan to an outdoor outlet and just use this remote to turn on the fan, adjust the fan speeds. My fan does not have a light attached so I cannot comment on the light function on the remote.

This remote was already paired with it's receiver. That is so helpful. The little LED lights let you know the batteries work which was super helpful during installation (is the problem with the remote, the switch being turned off, the wiring, etc.?). It doesn't feel super lightweight compared to the other one I have. If you're adding to the wall, make sure it's level to the other switches.

Perfect replacement for our 20+ year old porch fans. Easy to install. Integrated light kit would have been nice...the (allegedly compatible Hunter Marine II) kits we purchased required fan switch location modifications...what a hassle.

Product not as pictured. The finishing looks silver and it is completely white.

Beautiful and quiet. Couldn't be happier with the product. Don't know why they don't have this in stores.

I usually prefer to have a fan and light switch on the wall wired with the appropriate romex for the extra wire for the fan, however in our master bedroom it wasn’t possible to fish new wire to the ceiling fan due to attic access issues. This switch will give you the ability to control your fan and lights separately without the use of the pull chains, and since it uses a wireless remote you can place the remote cradle wherever you wish or move the remote around the room with you if desired. Install – Install was very easy. After turning off the breaker, simply remove the ceiling box cover and wire the controller in following the wiring chart included. Our Hunter fan had a black wire with a white stripe instead of a blue wire for the fan, but other than that it was very straight forward. I also have to commend Hunter for including wire nuts in the packaging as I always find it annoying when they are not included. The controller is small enough to fit under the dome or even in the ceiling box if it’s standard size. You will also need a small Phillips screwdriver to install the button battery in the remote and then decide where to mount the remote cradle. You can either install it with screws or command release (included). We installed ours on the switch cover right next to the switch as we prefer to leave it in the cradle as to not lose it. Setup - There isn’t much to setup as the remote will most likely work right out of the box. Just be sure your switch and pull chains are on before starting, being sure the fan is set to high. Dimming did not work right away and the reference card for the remote had to be referenced to enable dimming. Being able to disable dimming can be very helpful when you are using LED or CFL bulbs without dimming capability, especially somewhat expensive LED candelabra bulbs. Impressions – I was very happy with the easy install and the small size of the remote. My only complaint with this unit is the somewhat lacking instruction card for the use of the remote. Setting the dimming mode and some of the other operations aren’t exactly clear, and better instructions would have been very helpful, and should have also been included on the main instruction sheet as there were absolutely no remote instruction on the main instructions. Overall I am very happy with this remote and would gladly buy a second when the need arises.