#1 Home Improvement Retailer

Internet #205887786

Model #224317

Store SKU #1001277761

1.8 ft. x 3 ft. Portable Jobsite Workbench

Apply Now
Pay $74.00 $99 when you open a new card. info
Apply for a Home Depot Consumer Card
  • Heavy-duty metal legs support up to 1500 lbs.
  • Includes router insert plate to accommodate common routers
  • Portable workbench is lightweight at just 19.85 lbs.
  • View More Details
0 in stock
Text to Me
How to Get It

Frequently Bought Together


Product Overview

The Husky 1500 lbs. portable work table can be used for multiple applications on the jobsite and around the house. It can be used as a miter saw stand, router table and general purpose. It is strong, durable, light weight and easily transportable.
  • Heavy-duty metal legs hold 1500 lbs.
  • Metal rails allow small bar clamps to be inserted to create a clamping surface (bar clamps not included)
  • Standard professional router insert plate included, pre drilled to fit common routers
  • Work table surface is 32 in. height, equal height to the standard sawhorse
  • Integrated handle makes it easy to carry; folds down for unobtrusiveness when using the table
  • Includes 4 metal brackets to hold 2 x 4s
  • Storage case included for accessories
  • Backed by Husky's Limited 2-year Warranty. Click here for more information.
  • Requires assembly
  • Bar clamps and tools not included, shown in images for demonstration purpose only
  • Call 1-888-HD-HUSKY for customer service and support.
  • Click here to learn more about exclusive Husky products

Additional Resources

From the Manufacturer

Compare Similar Workbenches

current product
Exclusive1.8 ft. x 3 ft. Portable Jobsite Workbench
Greenhouse Metal Work Bench4 ft. W x 5 ft. H x 2 ft. D Black Steel Workbench with Built-In Power and LightingYellow 2-Shelf Garage Storage Workbench Kit
Name1.8 ft. x 3 ft. Portable Jobsite WorkbenchGreenhouse Metal Work Bench4 ft. W x 5 ft. H x 2 ft. D Black Steel Workbench with Built-In Power and LightingYellow 2-Shelf Garage Storage Workbench Kit
Assembled Width (in.)34.65 in45.3 in24 in56 in
Assembled Depth (in.)21.65 in20.1 in48 in18 in
FeaturesNo Additional FeaturesAdjustable Height,Assembly RequiredWith DrawersScratch Resistant,With Drawers
Assembled Height (in.)32.00 in31.50 in60 in50 in
Weight Capacity (lb.)1500.000165 lb5143000 lb
Frame MaterialAluminumSteelSteelSteel
Assembly TypeFull Assembly RequiredFull Assembly RequiredFull Assembly RequiredFull Assembly Required
Number of DrawersNo DrawersNo Drawers2 Drawers1 Drawer
View ProductView ProductView ProductView Product



Assembled Depth (in.)21.65 inAssembled Height (in.)32.00 in
Assembled Width (in.)34.65 in


Assembly RequiredYesAssembly TypeFull Assembly Required
Color FamilyBlackFeaturesNo Additional Features
Frame MaterialAluminumIncludedWorkbench
Number of DrawersNo DrawersProduct Weight (lb.)19.18 lb
Weight Capacity (lb.)1500.000

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.5
    out of 784 reviews
  • 89%recommend this product
Filter by:
Showing 1-10 of 784 reviews
Happy Camper
Got Rockler plate for my Skil router, it was little too tight so I sanded the edge tiny bit and presto,it fits and works great.My Skil happy camper now.All I have to do is get some clamps .I am happy
    • Recommended
    Love this table...But
    I love this workbench. use it all the time. Which may be why one of the red clips that holds the legs in place snapped one day. The leg no longer stays stowed, super anoying. Other than that its awesome!! I would gove 5 stars if ot wasnt for the clip.
      • Recommended
      1 found this review helpful
      The table works for my needs-occasional woodworker and garage busybody. It comes with 2 screws th...
      The table works for my needs-occasional woodworker and garage busybody. It comes with 2 screws that slide in the slots to make a fence, and I went to HD and got some Bessey 2.04 (4"×2") bar clamps ($4.97 ea) that also fit perfectly in the slots for other clamping needs. My Dewalt router fits perfectly on the router insert-I found a YouTube video that pointed out which holes to use. I improved install by removing the handle knob on the Dewalt attachment so it can easily go in and out. Good steady surface that holds a lot of weight-I put 500 pounds on it with no trouble. The ability to put a 2x4 on the extension clamps is a plus. I attached a power strip on one piece for easy on/off of router and multiple power connections. 1 minute to set up and when I'm done it takes 1 minute to store legs and put folded table out of the way. For the price I couldn't be happier.
      • Verified Purchase
      • Recommended
      1 found this review helpful
      Great work bench, poor router table
      Overall, great workbench. However, when I hooked up my router, the force of running a small prices of maple shattered the plate. Thankfully, no damage done to me, my router, or the router bit ... table, not so much.
      Response from Keter-NADec 28, 2020
      We do apologize for the problems and inconvenience you had with your Keter purchase. We have customer service available seven days a week 8 am thru 5 pm, EST at 877-638-7056. We can also be reached by email from the following web site: http://uslparts.com/ or https://www.keter.com/en. We can send replacement parts out to you and help in resolving any issue to your full satisfaction. HomeGarden
        4 found this review helpful
        Built a jointer jig that fits into router plate whole
        Designed a homemade jointer jig that drops right into the router plate whole. Love this workbench! Jointer jig uses the same fence that I made for the router.
          • Recommended
          4 found this review helpful
          Good Workbench, Router Function Needs Work
          Great table work a sturdy work bench. A steal at $50! If you are not a project person and want to use the "bolt in" plastic router template with the pre-drilled holes, you will need to ensure your router actually fits, but Husky don't list which models fit. Some of the users in this forum have commented which work. Most routers will not fit. I love a good deal, and purchased the 1 1/2 HP Ryobi for under $100! The narrative below explains how you can inexpensively adapt it to a larger, flatter table inexpensively for under $30. It works even better now! In my case the new Ryobi would not fit either. The problem, and this will be the case with most routers, is that you need to figure out which under-bench mounting screws will fit your router, buy them and likely drill your own holes. To countersink and be below surface, they need to be cheese-head type (v shaped) screws to leave a flat work suface. HD may not stock them them, since they may be a specialized machine screw. For the Ryobi, I found that 5/16" bolts would work, but no cheese head screws were immediately available in that size, so what to do? There were at least 2 possibilities. (1) Purchase four smaller cheese head screws that hold on the plastic face plate and use these to mount the router. My second choice because they are not as substantial as the 5/16" screw, and probably not recommended by the manufacturer, but they would likely work. May not be safe either. Who knows. I purchased four stainless steel 1" V-shaped screws and planned to grind them down to exact size, but again, purely a backup plan. (2) BEST SOLUTION: Buy a piece of 1/2" thick, high grade plywood to mount on the top of the table. This will give a larger, smoother working surface, superior to the work table (see various user comments). HD sell them in 2' x 4' size. Cost me about $17. If you have an off-cut, even better! Look closely at the sequence of photos. I started by making a template with cardboard, torn off the back of a writing pad. Taped it to the plastic pre-drilled template, and used it to drill 3 holes to mount the router. When you make the template, use the plastic face-plate from the router which makes it easy. Remember to cut out the round center hole to position with the hole. I taped mine down and drilled straight through the cardboard and plastic together. Worked like a charm. some fiddling required with the drill. Do not try to countersink the big bolts, as it will weaken the plastic and you will need to purchase 3/16" ply and make a new insert! Now, mount the router underneath. See the ugly, big bolt heads? These can be hidden by re-using the template underneath the plywood, and making a recessed hole using a larger spade drill but. Don't worry that it leaves a small hole through the ply, it makes no difference. Once you have made countersink holes, the ply will fit over the table. Cut the center hole using a 2 1/2" hole saw. The next step is your first routing project! Mark up the board on top to machine route the two guides on the ply, which will hold the fence and clamps. Then use a spade bit to drill holes at each end. Remember the lower slot needs to be larger than the channel so that a clamp can be slid in. I used 3/16" for the slot and 3/4" for the wider bottom piece. When you route the channel, clamp two thin pieces of wood to the table, so the ply will slide without hitting the bolts now poking up the router bench. I used two pieces of door casing since 2" x 4" wood was too thick as the router bit would not adjust that high. Once you have the desired channel routed out, mount your ply over the top of the bench. For perfect alignment, I inserted the 2 1/2" round cutting bit through the ply, and the drill bit in the center fitted into the collet of the router. Screw the ply down using 3 cheese head screws top and bottom on the ply. Mine screwed into the 2' x 4" timber in the frames at the top and bottom of the table. Ensure the 2 x 4's are first screwed in and align with the ply. Now insert the fence bolts and mount your 2 x 4 fence and you are done. Took me 2-3 hours of fiddling and a trip back to HD for the bolts and ply, but overall a much better tool for routing. worth evey bit of effort which will last for years.
            • Recommended
            8 found this review helpful
            Great and sturdy
            Great and sturdy workbench. We use it for sculpture projects.
            • Verified Purchase
            • Recommended
            Good Strong Table Very Well Built
            Table is very stable and string. Easy to assemble and the expansion hooks can be very useful. There are only two reasons that I did not give this a five star rating. (It should be 4.5 but I could not figure out how to do a half star) 1. They should have put a measuring tape etched into the long sides of the table to allow quick measures. 2. My Ryobi Miter saw does not fit into the slots for securing down. So even though they say it is a miter saw table it really is questionable. I would absolutely recommend purchasing this even if just for an extra table at the job site. Sooooo easy to put together and tear down. Can do it in less than a minute.
              • Recommended
              My router didn't fix it on the router plate
              My router didn't fix it on the router plate
              • Verified Purchase
              • Recommended
              3 found this review helpful
              I bought this for working with my chop saw (and a bench for other hand work).. I like the fact t...
              I bought this for working with my chop saw (and a bench for other hand work).. I like the fact that the legs come off, store under the table top and there is a carry handle to make transport and storage easier. The mounting slots do not match the chop saw I am using now (might match my other saw) but that seems to NOT be an issue. The saw has been stable on the table surface for the 2 weeks I have been working with this project. Good solid work surface. I would buy another one just to have it around. I have not tried the center mount system. It looks like it would be good for my router and possibly some other hand tools.. Did I mention that it can be a work bench?
              • Verified Purchase
              • Recommended
              7 found this review helpful
              Showing 1-10 of 784 reviews