Internet #312145944

Model #HOTC5205JX2M

Store SKU #1003951514

52 in. W 5-Drawer 1-Door, Deep Tool Chest Mobile Workbench in Stainless Steel with Hardwood Top

  • Built-in power strip w/ 6 outlets and 2 USB for easy charging
  • Supports up to 1,000 lbs. with a 18,554 cu. in. capacity
  • Equipped with 100 lb. Rated Soft Closing Drawer Slides
  • See More Details
$59800

Frequently Bought Together

+
+
Price:
$59800

Product Overview

Built for its functional work space and large storage capacity the Husky 52 in. 5-Drawer with 1-Door and 24.5 in. D mobile workbench in stainless steel is the perfect combination for your tool storage system. This mobile work center has large, 5 in. x 2 in. casters and a steel tubular side handle, which allow you to easily move it, even when fully loaded. Each drawer is equipped with 100 lbs. rated soft closing ball bearing slides. The top long drawer is able to hold larger longer items and the deep bottom drawer has double sets of 100 lbs. rated soft closing slides to enable you to store your heavier bulk items. This unit also has 1-Door with 1 Adjustable shelf so larger items can be stored. It is constructed with heavy 21-Gauge steel and is strong enough to support 1,000 lbs. The 1 in. thick solid wood top is sealed with a protective coating to protect it from the elements.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Mobile Workbenches

current product
52 in. W 5-Drawer 1-Door, Deep Tool Chest Mobile Workbench in Stainless Steel with Hardwood Top
52 in. 9-Drawer Mobile Workbench in Gloss Gray56 in. W 9-Drawer Deep Tool Chest Mobile Workbench in Gloss White with Hardwood TopHeavy-Duty 52 in. W 9-Drawer, Deep Tool Chest Mobile Workbench in Matte Black with Adjustable-Height Hardwood Top
BrandHuskyHuskyHuskyHusky
Name52 in. W 5-Drawer 1-Door, Deep Tool Chest Mobile Workbench in Stainless Steel with Hardwood Top52 in. 9-Drawer Mobile Workbench in Gloss Gray56 in. W 9-Drawer Deep Tool Chest Mobile Workbench in Gloss White with Hardwood TopHeavy-Duty 52 in. W 9-Drawer, Deep Tool Chest Mobile Workbench in Matte Black with Adjustable-Height Hardwood Top
Price
$59800
$59800
$59800
$74900
Ratings
(219)
(481)
(11)
(219)
Nominal Width52525652
Tool Chest SizeLargeLargeLargeLarge
FeaturesBall Bearing Slides,Lockable,Soft Close Drawers,Wheel Locks,WorktopLockable,Soft Close Drawers,Wheel Locks,WorktopLockable,WorktopBall Bearing Slides,Lockable,Wheel Locks,Worktop
IncludedNo Additional Items IncludedKeyed LockKeyed LockKeyed Lock
GradeGeneral PurposeGeneral PurposeGeneral PurposeHeavy Duty
Frame Steel Gauge21212119
Product Height (in.)3838 in38 in38.1 in
Number of Drawers5 Drawers9 Drawers9 Drawers9 Drawers
View ProductView ProductView ProductView Product

Specifications

Dimensions

Nominal Width
52
Product Depth (in.)
24.5 in
Product Height (in.)
38
Product Width (in.)
52 in

Details

Color Family
Stainless Steel
Color/Finish
Stainless Steel
Drawer Slide Weight Rating (lbs.)
100
Features
Ball Bearing Slides,Lockable,Soft Close Drawers,Wheel Locks,Worktop
Frame Steel Gauge
21
Grade
General Purpose
Holding Capacity (cu in.)
18554
Included
No Additional Items Included
Material
Steel
Number of Drawers
5 Drawers
Number of Shelves
1 Shelf
Number of Trays
No Trays
Number of Wheels
4
Product Weight (lb.)
230 lb
Returnable
180-Day
Tool Chest Size
Large
Tool Storage Product Type
Mobile Workbench
Tools Product Type
Tool Storage
Top Material
Wood
Weight Capacity (lb.)
1000

Warranty / Certifications

Manufacturer Warranty
3 Years

Questions & Answers

51Questions15Answers

Where is it made?

Asked by Jim September 24, 2020
1
Answer

Vietnam

I wonder if the drawers open itself while rolling the box around?, that is the biggest problem I ...

Asked by Khang September 11, 2020
2
Answers

No, they will not open while moving.

Do the wheels have to be installed?

Asked by Aggie August 28, 2020
1
Answer

This unit ships without casters installed. It is not required to install casters for the unit to work properly.

Whete are the power outlets

Asked by Bo August 26, 2020
1
Answer

The power strip is installed on the right hand side of the toolbox.

When will it be back in stock?

Asked by dog August 23, 2020
1
Answer

Additional stock will become available in September.

Is the shelf height adjustable?

Asked by Bergram August 14, 2020
1
Answer

Yes, the shelf is adjustable.

How do you get the casters on if the work bench weighs over 350 lbs? I am an old woman and my ro...

Asked by BabblingBrookie July 31, 2020
2
Answers

We flipped it on it’s side - down was easy but up requires some strength- we used the shipping pallet and packaging materials to lay it down on.

can you mount the Husky 52" Peg Board too this ?

Asked by Mike July 27, 2020
1
Answer

No, the pegboard is not compatible with this unit.

Debating whether or not to pick this up at the store or have it dropped off for $99. Does anyone ...

Asked by Freddi July 24, 2020
4
Answers

Depends on size of SUV. It's over 400 pounds in package. Was tough enough to get in and out an open truck bed. Not sure I'd want to be bent over inside SUV.

Does the single lock at top lock all the drawers?

Asked by SK July 23, 2020
1
Answer

Yes the lock will lock all drawers.

52 in. W 5-Drawer 1-Door, Deep Tool Chest Mobile Workbench in Stainless Steel with Hardwood Top - page 2

Customer Reviews

  • 219 Customer Reviews
  • 4.7 out of 5 stars overall
91% of customers recommended.
Overall Ratings
5star-icon(181)
4star-icon(24)
3star-icon(3)
2star-icon(2)
1star-icon(9)
Sort By:
got the blue version, not happy with it
I bought the heavy duty, and extra expensive, box because I was expecting the quality to match the price, but I am not impressed with what I received at all. I'll start with the good - it does use the heavier gauge steel than their cheaper boxes, and the powdercoated finish seems like it should be a lot more durable than the paint that comes on most cheaper boxes. But there are several issues that indicate a lack of quality control from the factory, which is VERY disappointing when you shell out for the expensive, high-end box. It has no damage from shipping or handling by the way, it only has manufacturing defects. The first issues is with two of the drawers at the back right corner, where the back wall and the right side wall of the drawer are welded together, the right wall wasn't folded in all the way to the correct position when it was welded. It's only a little off but that's enough to cause the right side of the drawer to rub against the slide as you open and close it, and it also causes the back right corner of the drawer to bump into the end of the slide as you're closing it from the fully opened position. With my cheapo HF box, and several other cheap boxes that I've looked at since I received this one, I can't get the drawers to make contact with the slides even if I TRY to make it happen. The other issue is that other drawers have abnormally stiff slides even when brand new. It feels like they're sliding on bare metal rather than on the ball bearings. And they squeak a ton. I might try lubing them up but I will probably just end up returning this box, as these two issues already when brand new are not a good indication for it's long term quality. I will probably be returning it. I'm posting one picture of one of the good drawers, to show what the corner is supposed to look like, and several pictures of a bad drawer to show the issues I'm describing.
Was this helpful?
1
0
Response from Tool Storage ExpertSeptember 14, 2020
Contact Husky Customer Service, they will help get a replacement drawer and any other parts needed.
I bought the heavy duty, and extra expensive, box because I was expecting the quality to match th...
Quality :
2
Value :
1
I bought the heavy duty, and extra expensive, box because I was expecting the quality to match the price, but I am not impressed with what I received at all. I'll start with the good - it does use the heavier gauge steel than their cheaper boxes, and the powdercoated finish seems like it should be a lot more durable than the paint that comes on most cheaper boxes. But there are several issues that indicate a lack of quality control from the factory, which is VERY disappointing when you shell out for the expensive, high-end box. It has no damage from shipping or handling by the way, it only has manufacturing defects. The first issues is with two of the drawers at the back right corner, where the back wall and the right side wall of the drawer are welded together, the right wall wasn't folded in all the way to the correct position when it was welded. It's only a little off but that's enough to cause the right side of the drawer to rub against the slide as you open and close it, and it also causes the back right corner of the drawer to bump into the end of the slide as you're closing it from the fully opened position. With my cheapo HF box, and several other cheap boxes that I've looked at since I received this one, I can't get the drawers to make contact with the slides even if I TRY to make it happen. The other issue is that other drawers have abnormally stiff slides even when brand new. It feels like they're sliding on bare metal rather than on the ball bearings. And they squeak a ton. I might try lubing them up but I will probably just end up returning this box, as these two issues already when brand new are not a good indication for it's long term quality. I will probably be returning it. I'm posting one picture of one of the good drawers, to show what the corner is supposed to look like, and several pictures of a bad drawer to show the issues I'm describing.
Was this helpful?
0
0
Response from Tool Storage ExpertSeptember 14, 2020
Contact Husky Customer Service, they will help get a replacement drawer and any other parts needed.
Worked great for my needs like the matte black finish. The adjustable top is a nice touch I proba...
Worked great for my needs like the matte black finish. The adjustable top is a nice touch I probably won't use often but nice that it is there. The soft close drawers work but will need some breaking in when you first get one of these. I custom modified mine into a workbench hutch. Built the upper portion all myself can be seen here. https://youtu.be/L-NWb8A_-8k
Was this helpful?
0
0
Great Value and so functional! I love how the top is adjustable but I purchased a peg board to go...
Great Value and so functional! I love how the top is adjustable but I purchased a peg board to go with it and it didn't work with this model. Love the included accessory logo mats, the outlets that come on the side with USB outlets. Overall great product!
Was this helpful?
0
0
Perfect Tool Chest For DIYers
The perfect tool chest to complete my dream garage. I love the finish on the hardwood top and the matte black powder coated cabinet.
Was this helpful?
0
0
The large upper drawer sealed the deal
I bought this unit because of the length made it a good fit under the 6 foot husky bench, and because the size of the upper drawer. With this model, I was able to turn most of drills/power tools sideways and set in the top drawer itself for quick access. The bottom drawer handled the saws and larger items. With this, I threw my handheld toolbox away, stashed my toolbag in a drawer, and cleaned up my garage so that I could put my wife's vehicle back in it. No more wrenches, drive kits, hammers and tape measurers laying around. Everybody wins.
Was this helpful?
1
0
No Problem with home delivery
I got two of these and two 72”tables delivered to the house. Lots off quality packaging. And it is a chore to get the casters on solo. But the final product is so worth it. When the tables are at maximum height on casters the work benches just fit underneath
Was this helpful?
1
0
Very sturdy quality built feels like my snapon box but a 5th of the price the top is nice and th...
Very sturdy quality built feels like my snapon box but a 5th of the price the top is nice and the adjustable part not necessary but allows me to store some things like clamps and such which is nice
Was this helpful?
0
0
Very Nice Starter Box
Have had this toolbox for just about two years now, and held off on a review until I was able to use it for some time. Bought it on sale for under $600 which is a very good deal for the box quality! Came in perfect condition out of the packaging, with manuals, drawer liners, and casters ready to go. Drawers were a little resistant at first, but loosened and operated perfectly with increased use. The soft close feature on the drawers is very nice and smooth. Dual slide drawers are perfect for heavier and specialty tools. Adjustable wood work top is durable and an awesome feature to have when disassembling vehicle components. There is a ton of storage space for any tools or setup you may have! This was my starting toolbox for my career and it has more than served me well. I highly recommend it for shop use or even for the garage at home! For the price and quality, you can’t beat it.
Was this helpful?
3
0
I am using this as an adjustable height standing desk, and for that purpose it is excellent! The ...
Quality :
3
Value :
5
I am using this as an adjustable height standing desk, and for that purpose it is excellent! The top is very sturdy, even loaded up with all my desk gear. The drawers provide ample space for office and project supplies, and the space below the work table is ideal for cable management and quick access storage. I don't need a sit-to-stand workstation, so this allowed me to adjust the height through the day as needed (small adjustments can make a big difference depending on the task at hand). I did replace the back wheels with swivel casters so I could wheel it to and from the wall for access to data lines and power outlets. A quick warning to potential buyers... this thing is HEAVY! My neighbor helped me move this from my truck into my detached office and it was not easy, even with all the drawers pulled out and no casters installed. Once it was in the office I was able to manhandle it upright once the casters were attached, but man... I do not look forward to moving this thing again, ever. Which brings me to my one gripe... the paint in the corner of one of the drawer openings was applied too sparingly and the steel has begun to rust. This was an issue out of the box, but there is no way I'm going to return it for a better one. I wish I would have inspected it more carefully before I hauled it out here. I think I can wire brush it and touch up the paint, but it's a little disappointing to see. All in all, a very good product if you get one that was properly QC inspected.
Was this helpful?
3
0
Review this Product
Share your thoughts with other customers