#1 Home Improvement Retailer

Internet # 203287749

Model # 48060

Store SKU # 881921

7 in. End Nipper Cutting Pliers

$997
  • Durable quality
  • Long lasting
  • Lifetime Warranty with no questions, no receipt required.
  • View More Details
Store
0 in stock
caret

Product Details

End nipper featuring a knife and anvil design for precise cuts


Knife and Anvil Design for Precise Cuts

The knife and anvil design of these end nippers results in a smooth, precise cut every time.

End nippers outfitted with comfort-grip handles


Comfort-Grip Handles

The soft, textural finish of the comfort grip handles makes this tool comfortable to hold and helps prevent slipping.

End nippers boasting a heat-treated metal cutting edge


Heat-Treated Metal Cutting Edge

A heat-treated metal cutting edge makes the blade durable enough to hold up to many years of use.

The Husky 7 in. High Leverage End Cutting Pliers are designed for cutting wire, nails, rivets, etc. The design allows for a close and efficient cut. They are a must have for any professional or Do-It-Yourselfer.
  • Precision knife and anvil design for superior cutting
  • Heat treated cutting edge for longer life
  • High leverage design for more cutting power compared to standard rivet design pliers
  • Comfort grip handles for non-slip usage
  • Call 1-888-HD-HUSKY for customer service and support.
  • Backed by a Lifetime Warranty. If your Husky product ever fails, bring it back and we will replace it for free. Click here for details.
  • Click here to view more exclusive Husky products.
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

4Questions
caret
Q:Will these cut 8, 10, and/or 16 penny steel nails?
by|Nov 23, 2020
2 Answers
Answer This Question

A:  Because of the location of the pivot joint and the length of the handles, they are too cumbersome to use with one hand. To grab a nail to cut, the handles must be opened very wide which isn't easily done with one hand. This is the most difficult to use end nipper I've used in over 30 years.

by|Apr 3, 2021
    1 found this answer helpful

    A:  I do not feel these would be the best choice to cut nails of that diameter. You would have to apply great force. An oscillating tool would work better.

    by|Apr 3, 2021
      1 found this answer helpful
      caret
      Q:Will this cut nails
      by|Oct 2, 2020
      2 Answers
      Answer This Question

      A:  Yes, it will also pull them out just don't squeeze too hard.

      by|Oct 2, 2020

      A:  I have used mine to cut finishing nails or pull out small nails. They can be used to cut small nails and tacks.

      by|Nov 13, 2020
      caret
      Q:Will these cut the ends off roofing nails that went through underlayment after installing shingle...
      by|Jul 2, 2020
      1 Answer
      Answer This Question

      A:  Hi Kelli940, thank you for your inquiry. The Husky 7 in. End Nipper Cutting Pliers are designed to cut nails, wire, rivets and other items. This item should work for your project. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!

      by|Apr 3, 2021
      1 found this answer helpful
      caret
      Q:Are these also consider "nail PULLERS"? Can they be used for that or will they only CUT please? ...
      by|Feb 11, 2018
      5 Answers
      Answer This Question

      A:  Yes, I use mine for pulling nails.

      by|May 16, 2019
        4 found this answer helpful

        A:  This tool can do both, pull and cut nails. I have used it several times already with nails from my nail gun where I made a mistake. Just grip the nail where it meets the wood and roll the handles in a downward motion. Def worth the money.

        by|May 16, 2019
          4 found this answer helpful

          A:  Bought and used as pullers. Very small brads from a finish nailer will often cut but all else can be pulled or pulled thru (old trim being restored).

          by|May 16, 2019
          4 found this answer helpful

          A:  Yes, the tool can be used to pull nails as well.

          by|May 16, 2019
            3 found this answer helpful

            A:  Sure

            by|Sep 2, 2019
              2 found this answer helpful
              Showing 1-4 of 4
              caret

              Customer Reviews

              4.4 out of 5
              (183)
              • 4.4
                out of 183 reviews
              • 90% recommend this product
              Filter by:
              Showing 1-10 of 183 reviews
              good but what happened to the ones with claw on the back?
              I bought a pair of the 7” husky end nippers with a hammer claw on the back, and by far they are the best i have ever used once i made a modification to them and made them spring loaded, reason why first off the grind on the top is flush not many end nippers usually are, secondly when i am doing subfloor prep there are a ton of staples to be pulled, and the nippers with the claw made it so it was single tool removal with the claw because you could dig out tough stables where without the claw you would have to use a chisel or small pry bar to pop the staple up enough then pull it out with the nippers. And finally the reason why i modified them and made them spring loaded was pulling 1000 staples and having to constantly open the jaws every time not only takes more time but will kill your hand by the time you are done, with the spring i added they pop open and im just pulling staples with ease left and right.... but my point is i came back to buy a back up pair of them and gone cant even find them online.... what gives???
              by
                • Recommended
                Great for pulling nails
                Great for pulling nails
                by
                • Verified Purchase
                • Recommended
                2 found this review helpful
                it works for the way it was designed but the design is wrong. I thought it would nip off finish n...
                it works for the way it was designed but the design is wrong. I thought it would nip off finish nails flush to the surface but the way it is designed it leaves a good 16th still protruding, the blade needs to be on the outside of the tip not the inside, now all I have is a spendy pair of wire cutters.
                by
                • DIY
                • Verified Purchase
                8 found this review helpful
                Another Discontinued Husky Tool
                If you find a husky tool that you like you better by quickly. HUSKY TOOLS are discontinued frequently and become unavailable in stores in on homedepot.com for purchase. Most Husky SKU’s only seem to be active for 1-2 years and then are discontinued.
                by
                  • Recommended
                  by
                    I also use these as a nail puller
                    I also use these as a nail puller. I like how well the fit in my pocket. Well, I did. I saw in store that this model was discontinued. Husky updated it with a "claw" nail puller on the one side. NOT A GOOD MOVE. Now the tool is big and bulky. A claw is not useful for precision nail pulling. Bring back this style, PLEASE? I bought a pair of Channellock brand. I already know they don't work as well for nail puulling, but I do not like the "updated" model of this plier at all.
                    by
                      • Recommended
                      by
                      • Verified Purchase
                      Poor design. I have used end nippers for decades. The...
                      Poor design. I have used end nippers for decades. The length of the handles and the placement of the pivot joint make single hand use VERY difficult, as the handles must be opened too wide for most tasks. This makes it very cumbersome and time-consuming to use. I will be returning these and playing a different brand.
                      by
                      • Verified Purchase
                      Rating provided by a verified purchaser...
                      Rating provided by a verified purchaser
                      by
                      • Verified Purchase
                      1 found this review helpful
                      I misplaced my Nipper cutting pliers so I went to my store of choice, Home Depot to buy a replace...
                      I misplaced my Nipper cutting pliers so I went to my store of choice, Home Depot to buy a replacement. Husky makes good quality tools so this is what I bought. I mainly use these to pull finishing nails of which they preform well.
                      by
                      • DIY
                      • Verified Purchase
                      • Recommended
                      Showing 1-10 of 183 reviews

                      Compare Similar All Trades Specialty Pliers

                      5-1/2 in. Mini Needle Nose Pliers with Slim Head
                      current product
                      Top Rated7 in. End Nipper Cutting Pliers
                      Best Seller7 in. End Nipper with Hammer Head10 in. Universal Extra Heavy-Duty Ear Type CV Boot Clamp Other Pliers
                      BrandGEARWRENCHHuskyHuskySTARK USA
                      Name5-1/2 in. Mini Needle Nose Pliers with Slim Head7 in. End Nipper Cutting Pliers7 in. End Nipper with Hammer Head10 in. Universal Extra Heavy-Duty Ear Type CV Boot Clamp Other Pliers
                      Price
                      $1098
                      $1197
                      $1697
                      $1872
                      Ratings
                      (0)
                      (183)
                      (95)
                      (0)
                      Individual/SetIndividualIndividualIndividualIndividual
                      View ProductView ProductView ProductView Product