#1 Home Improvement Retailer

Internet # 313154682

Model # HXTRAC7PCCOMBO

SAE/Metric Dual Direction Extraction Set (14-Piece)

$47.97
Apply Now
Pay $22.97 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Includes 10 SAE + Metric Extraction Sockets and 4 Impact Adapters
  • Bolt extractors have a tapered entry for easy fastener placement
  • Extractor socket set features 10X longer life vs competition
  • View More Details
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

The Husky 7-Piece Dual Direction Extraction Socket Set brings game-changing innovation to the world of bolt extraction. These sockets feature a tapered throat which allows for easy placement onto a fastener and ensures the fastener will not become lodged in the socket after removal. The sockets have a patented design that allows them to grip in both the left hand (Removal) and right hand (Installation) directions, this would allow for the reuse of a damaged fastener if needed.

Highlights

  • Set includes 14-pieces: 5 metric extraction sockets - 8 mm, 10 mm, 12 mm, 13 mm, 14 mm, 5 SAE extraction sockets - 1/4 in., 5/16 in., 3/8 in., 7/16 in., 1/2 in. and 4 impact adapters - two 1/4 in. and two 3/8 in.
  • Tapered entry enables socket to easily seat on a damaged fastener, no hammering required
  • Square drive with hex base for use with impact gun, ratchet, wrench or pliers
  • Dual directional design for removing or tightening damaged fasteners
  • Chrome molybdenum (CR-MO) steel for superior strength and durability
  • Enables removal or reuse of damaged, rusted or corroded fasteners
  • 10X longer impact life capacity versus competition
  • 5X greater torque output
  • Call 1-888-HD-HUSKY for customer service and support.
  • Backed by a Lifetime Warranty. If your Husky product ever fails, bring it back and we will replace it for free. Click here for details.
  • Click here to view more exclusive Husky products.
  • Return Policy

Product Information

Internet # 313154682

Model # HXTRAC7PCCOMBO

Additional Resources

Shop All Husky

Specifications

Dimensions: H 8.86 in, W 3.94 in, D 1.78 in

Dimensions

Maximum contact size (in.)

.55

Minimum contact size (in.)

.31

Product Depth (in.)

1.78 in

Product Height (in.)

8.86 in

Product Width (in.)

3.94 in

Details

Hand Tool Type

Extractor

Handle Material

Metal

Returnable

90-Day

Tools Product Type

Hand Tool

Warranty / Certifications

Manufacturer Warranty

Lifetime Warranty

Questions & Answers

9Questions
caret
Q:Can these be used on square nuts?
by|Apr 25, 2024
1 Answer
Answer This Question

A:  Jc77, These sockets are designed to work on 6-point rounded hex bolts.

by|Apr 25, 2024
    caret
    Q:Can they be used on metric bolts or just standard?
    by|Oct 27, 2023
    1 Answer
    Answer This Question

    A:  Steven, This is the SAE set, we also offer a Metirc set, Internet # 309192536, Model # HXTRAC7PCMM, and a set that contains both SAE and Metric sockets: Internet # 313154682, Model # HXTRAC7PCCOMBO

    by|Oct 27, 2023
      caret
      Q:Can these be used to extract stripped lug nuts? (for 19mm, for instance)
      by|Oct 3, 2023
      1 Answer
      Answer This Question

      A:  Mark, These can be used on stripped fasteners, unfortunately, our set stops at 1/2 inch or 14mm smaller than the 19 you are looking for.

      by|Oct 3, 2023
        caret
        Q:I drilled a hole in the broken off screw shaft, spiral screw extractor screws in in reverse to back out shaft and Chuck keeps opening up, won't back it out! Help, ideas?
        by|Aug 6, 2023
        1 Answer
        Answer This Question

        A:  Dexter, These sockets are designed for use on rounded hex bolts, not screws and studs. I do not believe these will work for your application. It sounds like you are already using a screw extractor, that would be the best tool for the job.

        by|Aug 7, 2023
          Showing 1-4 of 9

          Customer Reviews

          4.1 out of 5

          • 4.1 out of 222 reviews
          • 83% recommend this product
          Filter by:
          Showing 1-10 of 222 reviews
          FTW! Highly recommend!
          I was fighting this one bolt and I just didn’t want to let it win. Hopped online, found this set (in both standard and metric), ran to Home Depot, and when I got home… BAM! I had this nasty booger out in seconds! Worth every penny and I’m so glad I decided to purchase both sets for future battles.
          by
            • Recommended
            Worth the price
            After struggling for 2 days to remove 2 starter mounting bolts these saved the day. Other kits were too shallow to clear the stud that attaches the ground nut and these worked out well for clearance. For my 13mm bolt which has been rusting away for the past 15 years I hammered on a 12 mm socket. Using a 3/8" to 1/2" adapter I could now get some torque on the nut and with plenty of force it did finally break loose.
            by
              • Recommended
              1 found this review helpful
              Complete Trash
              I bought these bolt extractors to remove a slightly rounded off bolt from a wheel hub. I got maybe 2 turns of the problem bolt before the extractor teeth stripped and became useless. Complete waste of money and time buying these. Look for an extractor that isn't weaker than the bolt you're trying to remove. Avoid this.
              by
                Worked on the first try
                Had a rounded 14mm exhaust manifold nut on a Nissan Altima that was just not coming out. Tried everything… map torch, penetrating oil, slightly smaller socket, and nothing worked. Went over to the Home Depot down the street from my house and picked up this set and a set of metal cutting wheels… didn’t end up needing the cutting wheels because the 14mm socket from this set worked like a charm. Just hammer it on the nut or bolt so it bites, and then just twist with a 3/8” wrench. Saved my butt!
                by
                  • Recommended
                  1 found this review helpful
                  Saved my brake job
                  The 12mm bolt on my brake caliper mounting bracket was rounded and nothing would get it off. I soaked it with PB blaster overnight and bought this set for the 12mm socket. Got the socket on it with a breaker bar and gripped nicely and cracked loose.
                  by
                    • Recommended
                    Just dont
                    Made my bolt worse that I was trying remove. STAY AWAY
                    by
                      1 found this review helpful
                      Worked like a charm. I was skeptical due to some...
                      Worked like a charm. I was skeptical due to some negative reviews. but i used the 13mm to remove a corroded-shut starter bolt. I had rounded the edges pretty good. Make sure to hammer the socket in to get good contact on the bolt. From the first try, i got it off, but actually, i broke the bolt head. But worked like a charm, that bolt was really frozen shut due to rust.
                      by
                      • Verified Purchase
                      Works great!
                      I successfully removed a rounded transmission bolt that was over torqued and in a very tight spot with no other way to access it. This thing saved the day. I had already tried hammering other sockets onto it and they kept slipping off. This thing held on and I removed the bolt on the first try. Life saver.
                      by
                        • Recommended
                        2 found this review helpful
                        Bought these to remove rusty exhaust manifold bolts / nuts that were in poor shape. Did not work ...
                        Bought these to remove rusty exhaust manifold bolts / nuts that were in poor shape. Did not work as required on first attempt. Moved to disassembling exhaust. Same issue; no go. More heat, lots of work, finally got exhaust disassembled. Pulled heads with catalytic converter attached. Was very much ready to throw new sockets in trash and give them a 1-star review, but I did use them to remove exhaust manifold when heads were on work bench. So I did use them successfully. They beat vice grips, and I’ll likely use them again. But for the price, I think there are better options (maybe Irwin) if you can find them. They’ll stay in my toolbox, but I’m not gonna run out and buy the sae equivalent.
                        by
                        • Verified Purchase
                        3 found this review helpful
                        These husky dual direction Metric extraction sockets work really good on everything I’ve used the...
                        These husky dual direction Metric extraction sockets work really good on everything I’ve used them on. Rounded bolts. Rusted bolts and even got lucky and it worked on a stud I was needing to remove to replace. If you use on a stud just make sure your not planning on reusing the stud because it will damage the stud and threads I didn’t give it 5 stars because I notice they didn’t work well when I used my 3/8’s aircat impact with these sockets. I guess because it’s spins faster then anything else I have so it was wanting to kick the socket off. Worked well with my battery powered tools and hand tools.
                        by
                        Showing 1-10 of 222 reviews