#1 Home Improvement Retailer

Internet #313262402

Model #HXTRACTAP91PCC

SAE/Metric Extraction and Rethreading Set (91-Piece)

$14500
Limit 3 per order
Apply Now
Pay $120.00 $145 when you open a new card. info
Apply for a Home Depot Consumer Card
  • Rethreading tap and die set comes with 91 rethreading tools
  • Ratcheting t-handle wrench only needs 5° to turn a fastener
  • Rethreading tools come neatly stored in a plastic case
  • View More Details
How to Get It

Frequently Bought Together

Top Rated
++
Price:
$14500

Product Overview

Husky has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5 ratcheting arc with reversing lever eliminates hand over hand turning. The hex die adapters work on either round or hex shaped dies.
  • Set includes 72-tooth ratcheting t-handle, sliding t-adapter, 34 hex dies, 34 taps, 2 pitch gauges, small tap adapter, medium tap adapter, 2 die adapters and a 4 mm hex key
  • Includes SAE hex dies – 4x40, 6x32,10x32, 8x32, 10x24, 12x24, 1/8x27, 1/8x28, 1/4x20, 1/4x28, 5/16x18, 5/16x24, 3/8x16, 3/8x24, 7/16x14, 7/16x20, 1/2x13 and 1/2x20
  • Includes metric hex dies – M3x.05, M3x0.6, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1, M7x1, M8x1.25, M9x1, M9x1.25, M10x1.25, M10x1.5, M11x1.5, M12x1.5 and M12.1.75
  • Includes SAE taps – 4x40, 6x32, 8x32, 10x24, 10x32, 12x24, 1/8x27, 1/8x20, 1/4x20, 1/4x28, 5/16x18, 5/16x24, 3/8x16, 3/8x24, 7/16x14, 7/16x20, 1/2x13 and 1/2x20
  • Includes Metric Taps – M3x0.5, M3x0.6, M4x0.7, M4x.075, M5x0.8, M5x0.9, M6x1, M7x1, M8x1.25, M9x1, M9x1.25, M10x1.25, M10x1.5, M11x1.5, M12x1.5 and M12x1.75
  • Includes 5 metric extraction sockets - 8 mm, 10 mm, 12 mm, 13 mm, 14 mm, 5 SAE extraction sockets - 1/4 in., 5/16 in., 3/8 in., 7/16 in., 1/2 in. and 2 impact adapters - 1/4 in. and 3/8 in. and 4 impact adapters 2-1/4 in. and 2-3/8 in.
  • Twist lock guide system reduces walk back of the die guide and stays centered while cutting
  • Die adapters work with the 3/8 in. drive pass-thru ratchet and socket system as well as socket accessories
  • Spring-loaded cap allows for quick release of large tap adapter
  • Ratcheting T-handles allow a 5 swing arc and have a reversing lever, eliminating hand-over-hand turning
  • Blow mold carrying case with tilted tap holders for easy access and secure storage - note case does not fit extractors
  • Tapered entry enables extraction socket to easily seat on a damaged fastener, no hammering required
  • Square drive with hex base for use with impact gun, ratchet, wrench or pliers
  • Call 1-888-HD-HUSKY for customer service and support.
  • Backed by a Lifetime Warranty. If your Husky product ever fails, bring it back and we will replace it for free. Click here for details.
  • Click here to view more exclusive Husky products.

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Details

Color FamilySilverHand Tool TypeTaps
Individual/SetSetMeasurement StandardMetric,SAE
Number of Pieces91Returnable90-Day
Tool Set TypeDie/ Tap SetsTools Product TypeHand Tool

Warranty / Certifications

Manufacturer WarrantyLifetime Warranty with no questions, no receipt required

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.2
    out of 308 reviews
  • 87%recommend this product
Filter by:
Showing 1-10 of 308 reviews
Saved my brake job
The 12mm bolt on my brake caliper mounting bracket was rounded and nothing would get it off. I soaked it with PB blaster overnight and bought this set for the 12mm socket. Got the socket on it with a breaker bar and gripped nicely and cracked loose.
by
    • Recommended
    Just dont
    Made my bolt worse that I was trying remove. STAY AWAY
    by
      1 found this review helpful
      Worked like a charm. I was skeptical due to some...
      Worked like a charm. I was skeptical due to some negative reviews. but i used the 13mm to remove a corroded-shut starter bolt. I had rounded the edges pretty good. Make sure to hammer the socket in to get good contact on the bolt. From the first try, i got it off, but actually, i broke the bolt head. But worked like a charm, that bolt was really frozen shut due to rust.
      by
      • Verified Purchase
      Works great!
      I successfully removed a rounded transmission bolt that was over torqued and in a very tight spot with no other way to access it. This thing saved the day. I had already tried hammering other sockets onto it and they kept slipping off. This thing held on and I removed the bolt on the first try. Life saver.
      by
        • Recommended
        2 found this review helpful
        Bought these to remove rusty exhaust manifold bolts / nuts that were in poor shape. Did not work ...
        Bought these to remove rusty exhaust manifold bolts / nuts that were in poor shape. Did not work as required on first attempt. Moved to disassembling exhaust. Same issue; no go. More heat, lots of work, finally got exhaust disassembled. Pulled heads with catalytic converter attached. Was very much ready to throw new sockets in trash and give them a 1-star review, but I did use them to remove exhaust manifold when heads were on work bench. So I did use them successfully. They beat vice grips, and I’ll likely use them again. But for the price, I think there are better options (maybe Irwin) if you can find them. They’ll stay in my toolbox, but I’m not gonna run out and buy the sae equivalent.
        by
        • Verified Purchase
        3 found this review helpful
        This is one of those tools that you need, but only during times where one runs into the cross-thr...
        This is one of those tools that you need, but only during times where one runs into the cross-threaded /damage threads,or your cutting your threads, be it the nut or a bolt. So we reflect on our FAA repair station days here as to the quality of this tap and die set. Now I found more times than not, thread chasing (cleaning) we use Taps and Dies and care must be used to ensure one does not damage it by doing so. This is a high quality set, with a 72-tooth ratcheting T-handle wrench - where was this when a use one almost daily - hand over hand and/or sliding the rod one end to the other in those tight spaces. There's a hex die adapters for round or hex shaped dies, sliding T-adapter, 34 hex dies, 34 taps, 2 pitch gauges, small tap adapter, medium tap adapter, 2 die adapters and a 4 mm hex key. Everything one would need both SAE and metric, plus the molded case and a 'Lifetime warranty with no questions, no receipt required' how could you go wrong. Beside, it's from Husky with a great line of tools and accessories. That's it, I have used a tons of tools as a repairman and DIY and this is a great set, value - that will last and backed for life.
        by
        • Recommended
        5 found this review helpful
        I really didn’t want to have to purchase this set, but I found myself needing it due to poor manu...
        I really didn’t want to have to purchase this set, but I found myself needing it due to poor manufacturing on some patio furniture I was assembling. Now that I have it, I’m sure my relatives will be asking to borrow it. The set is a very comprehensive set for the DIY or at home mechanic. I was pleasantly surprised at the quality of the pieces. They easily fixed the mis-threaded furniture piece and I was able to assemble the patio furniture. I’m glad I purchased this set as I’m sure I will need it at some point in the future.
        by
        • DIY
        • Recommended
        1 found this review helpful
        Husky really went above and beyond on this set. The first time I opened it, I thought "holy cow"....
        Husky really went above and beyond on this set. The first time I opened it, I thought "holy cow". I love having so many options. Most of the time I need a tap and die set is for repairs when I really don't want to make another trip to the hardware store. The ratchet has advantages and disadvantages. It allows you to work in really tight spots you might not otherwise be able to get to. My machining mentor always taught be to back up a turn for every 2 turns in. The ratchet makes that a little harder to track. I received this HUSKY SAE/METRIC RATCHETING TAP AND DIE SET (77-PIECE) for free to write this review.
        by
        • Recommended
        I love this set! Love it! A complete set that comes in a solidly built, durable case with heavy...
        I love this set! Love it! A complete set that comes in a solidly built, durable case with heavy-duty clasps, here you have everything you might ever need to fix a boogered up female or male thread. The contents are impressive: 34 dies, 34 taps, and ratcheting handles. The pieces are of high quality. They will last a very long time, maybe longer than you. This kit is for SAE and mm threads; there are two gauges to measure and figure out if SAE or mm threads. However, there are several “how-to” videos out there to show how to use the set. It is simple, really. Everyone starts out experimenting but gets the hang of it. A first thing to do is go buy cutting oil. You will always use plenty of it. There were no instructions with the kit; there are no charts. In my recent applications, I used a die to repair a starter bolt thread. I also used a tap to repair the female thread. Being home, having this set to repair bolt and bolt hole threads is a lot easier than going somewhere to match up and buy a new bolt. Sometimes you have no choice but to repair. This kit makes it as simple as using a sewing needle. Everything stays in place in the case if you bump, move, or store it. The set comes with a lifetime warranty (on the HD website it says no questions asked and no receipt necessary) and this is printed right onto the case sticker itself. Affordably priced, this set is within the reach of anyone. I recommend buying a steel rod without threads, and setting it in a vice so you can practice cutting threads. Practicing and following videos = being prepared when you do really need to use it. With is set, everything is there. It is in order. The quality is there with the pieces and especially the case which is important to me. I have bought cheaply and regretted seeing the clasps and cases break almost immediately but you will never see that with this set. Because of the quality of the set, its case, its completeness, its warranty, its durability, and its function, I would give this set 10 stars if I could. I highly recommend it. Do yourself a favor. If you must, look at other sets to see how cheaply put together they are then look at this set. Buying this set is a no-brainer.
        by
        • Recommended
        1 found this review helpful
        This HUSKY 77-Piece, SAE/METRIC Ratcheting Tap and Die Set exceeded my expectations. I was mostl...
        This HUSKY 77-Piece, SAE/METRIC Ratcheting Tap and Die Set exceeded my expectations. I was mostly impressed with the precise machinery. This kit provides your most common sizes in both SAE and Metric. The ratcheting wrench is designed for two hand operation allowing the user to maintain control. The ratchet includes soft grips and is also reversible. The 4-point closure of the included blow molded case is a very welcome addition!
        by
        • Recommended
        Showing 1-10 of 308 reviews