The siren SK626 can be activated by the included remote, or it can be activated by our SK6 series sensors. Please visit our website idealinc.com for details.
not sure if it will work with the ring system..i bought one motion sensor with this ...and i use a Blink system to see with...the remote turns on the siren and the motion sensor makes the alarm sound...you have to turn it on before you leave the house
Yes long as it is within range and visable.
Yes, there is a selector switch were you can select what mode you want.
Yes, it will on battery, not sure how long the batters will last. Mine was installed inside so I had power available. .6 amps
Yes, the alarm cycles are the same as activated by sensors. No, you cannot keep the alarm ON all the times.
The remote should be within 160 ft (50 m) from the siren.
Yes, you can link one remote to unlimited number of siren.
The batteries would last only up to 2 weeks. It should be powered with the included AC adapter.
Yes, the siren SK626 can be linked to the dialer SK618. Please refer to page 14 on the SK618 instruction and the SK626 instruction for details. Once linked, arm and disarm the dialer SK618 will also arm and disarm the siren SK626 automatically.