180-Degree White Motion Activated Outdoor Integrated LED Flood Light with 1500 Lumens.

This is a great light! I'm surprised seeing how much light such a little LED can display. It's just what I was looking for. You can set it to come on only with motion so that it stays on all night, but the light shines only if motion is detected. My previous one would always stay on, but at a reduced shine. This one has the option, but I'd prefer it to be black since it'll shine in my bedroom. I've attached a couple of pictures so you can see an alternate view; as well as how far the light illuminates by itself. A very nice light.

No more bulb changes with this LED light so you can mount it where you want as long as you have electricity. Hard wired, straight forward installation with easy instructions. Offers a nice flood of light great for a single driveway or dark area of you home's exterior. Fully adjustable light head so you can get the light right where you want it. Intensity is also adjustable. Motion sensor allows dusk to dawn operation or timed at 1, 5 or t0 minutes. A good utility and security light fixture.

The Outdoor motion light was very easy to install, as long as there is an existing junction box, the installation took only 15 minutes with only a screwdriver. The option for either wall or eave mounting is very convenient and gives multiple placement options. The light has a few options for setup, the light intensity can be set to high or low, the amount of time for the to remain on after detection, and dusk setting. The light can be set to turn on at dusk with a hi/lo light setting and still detect motion. The LED lights are bright and project light over a large area. This would be an excellent choice or any area around the house.

This light has the most features that make a motion activated light effective. You get 180 degrees of motion detection, and 1500 lumens of light. The head of the led, can be adjusted to suit everybody's need . It gives light to my entire back yard (150' x 175') The Hi/Lo feature is my favorite, its a low light (basically lights my walkout & 20' out) , if motion is detected it switch's to Hi) and you can set a timer for how long it stays on Hi ( 1, 5, or 10 minutes) Took me 20 minutes to install.

I've never had an easier installation of a light than this! First of all, they added a connector so that you wire in the connector, then plug it into the light at the very last. Anyone who has ever had to wrestle with a fixture dangling from wires while you're trying to wire-nut the wires to your electrical box will really appreciate this! Second: the mounting bracket rotates. I think this is my favorite feature I can't even remember how many lights I have had to install at a weird angle and then try to rotate the light to point it to where I wanted it. With this, you install the bracket, then rotate the front half of the fixture to match your light. The only thing to watch for is that the bracket rotates just less than 180 degrees, so be sure it can rotate where you need it before tightening the back half of the bracket down. Third: they supply multiple screw sizes. There are 2 lengths of mounting screws, plus two different sizes of screws for mounting to the box. This saved me in this installation, because one of the mounting holes in my box was completely stripped out (this is probably the 4th or 5th light that has been mounted here). They supply a larger screw which will grab in the stripped-out hole, saving me from having to pull the box out and replace it. The instructions are clean and precise, and are written on paper in a font large enough to be read easily.- no magnifying required! I just received a different device that had the instructions written so small that it was almost impossible to read them, so this is why I appreciated these. The light is very bright. I like the 'soft-on' feature - when you trip it, it comes up to full brightness over a couple of seconds instead of blasting you with full brightness all at once.

This item is perfect for open spaces like driveways and patios or lawn areas with the wide field of detection and lighting. I was able to illuminate my whole 35 foot driveway plus surrounding areas. I tested detection ranges up to 40 feet and more is possible if you aim the detector properly. Light is very bright for such a low wattage. Installation is versatile with the swivel mount for walls or soffit positions. The TEST mode is activated when it is first turned on making setup very simple with plenty time to adjust aim for the detector and the light. This is the best motion light I have encountered. Get one.

I mounted this light over my greenhouse door. I really like the motion sensor because it picks me up walking along the side of the building, I use the greenhouse a lot at night when it is cool. The sensitivity is very good when stepping up the brightness and when you set the auto night light it is by the darkness not by the time so it always comes on at the right time. I don't know what 1500 lumens is, but the light covers a very large area and I have it pointed mostly down. Installation was a snap, everything was included even the wire nuts and a nice weather seal. I couldn't be happier with this light, it serves my needs perfectly.

The 180-Degree Bronze Motion Activated Outdoor Integrated LED Flood Light with 1500 Lumens from IQ America really delivers from installation to its functions. The instructions were clear and the versatility of the adjustability allows this light fixture to fit a variety on needs. This light has excellent adjustability in both the sensor and the light itself. The controller for the light is very smart where you can program your idea of dusk, have different light intensities at different times of night and the light can stay on for 1, 5 or 10 minutes. First, when you install this light, it should be installed after a standard light switch. This allows for ease in setting up your light and I have often found that motion lights are often affected by power glitches requiring a reset. All parts were of good quality and included in the kit. I really liked that the wiring for the lamp was attached to the house wiring with a plug-in connector so the light fixture wasn’t in the way at that point of the installation. I selected this light to illuminate my fenced front yard. I live in a semi-rural location and often get skunks squeezing through my chain link fence or raccoons climbing over. I wanted to make sure my dogs were safe when going outdoors after dark. My front yard is approximately 50’ wide by 70’ deep and this light more than lit up the area. The light quality is white and bright out to the margins of the illuminated area. I was able to adjust the beam so it didn’t infringe on the road out front of on neighbor’s property. The motion sensor is extremely sensitive and recognizes my small dogs. LED lights, extreme adjustability, great functionality and a three-year warranty makes this floodlight one of the best things I have done for my front yard security.

This product is packaged in a cardboard box with a photo of the item at about 70% scale. Instructions are given on a single piece of folded paper in both English and Spanish. All of the mounting hardware (nuts, screws, wire-nuts) are contained in a plastic zip seal bag. This is a very nice LED motion activated security light. The light uses a LED panel to create a wide area of illumination of 1500 lumens. The product is made of a dark olive-brown plastic. The assembly is manufactured so that it can be mounted on a wall or under an eave by simply twisting the LED panel and sensor assembly. The light can be mounted in about 30 minutes time if you are replacing another unit. This unit has some nice adjustments to operate in a variety of situations depending on your needs. Adjustment as made using 2 simple dials and 1 button that are clearly labeled. My only complaint is that the depth of the housing does not let the item contact my brick mounting surface. My outlet box is mounted flush with the brick and the mounting crossbar included with the kit protrudes off the box by about 3/8”. The plastic housing of the light only offers about 1/4” of depth around the edge so I had to apply more caulk than usual. I think this may not be an issue if your mounting box is recessed about 1/2”.

The lamp stopped working three days after installation due to rain.