240-Degree White Motion Activated Outdoor Integrated LED Twin Flood Lights with 2100 Lumens

Easy to install and set up.

Packaging: Overall easy to open, only 2 small bags for the hardware, simple. First appearance: I would give it a 4/5 stars, it appears extremely clean but right away I can tell there is some limitations to the maneuverability to the lights themselves, see picture attached. Functionality: Back to the lighting, cannot go directly down so don't go that high up, with that said the lights do cover a wide area. Another dislike is that the lights have a limited range of motion due to the way they are built, you'll see my finger in the picture as to what I meant. Lighting: LOVE IT, the way the lights start slowly to turn on versus going from complete darkness to a blinding light. The 240 sensor is phenomenal and cannot wait to get another one, the fact it senses me with-in one foot of sticking my foot into the doorway is fantastic! Dislikes: The back of the light does not have any space to hold any wire-nuts, it is a quick connect so you can place the wire nuts in the box or in my case, didn't have a box so behind the wall they went. The back doesn't even have enough space to contain the quick connect it provides. Picture attached.

I had a old set of conventional flood light (2x150W floods) that covered my pool and 1/2 my back yard; I've been looking for a set of LED lights to replace these; I needed at least 2 lights to cover the area, and I wanted smart motion control (so that small animals don't trigger the light) and it had to be bright enought. Up until recently I could not find LED floods that were over 800 lumens/buld, but thes fit the bill perfectly, I especialy wanted a brighter white light (>5000K, these are 5200K). The lights can be set to come on at dusk and go off after a programed time, You can also progeam them to come on while motion is detected and stay on for 1,5 or 10 minutes. The laster is what I wanted, most of the time. Each light can be rotated back and forth and up and down, and then locked into place (if desired). Installation was fairly straight forward, but connecting to my box tightly was still quite tricky, I managed to get it done but getting the watertight seal was a challage; including diiferent thickness of rubber would have helped. But I'm happy with the appearence and the brightness.

We love LED lights, and even better when motion activated. IQ America 240-Degree Bronze Motion Activated Outdoor Integrated LED Twin Flood Lights with 2000 Lumen is a great flood light. We already have flood lights in our driveway but needed one for an enclosed area (only open on one end) where we keep our tractor and RTV. It is even dark during the day. This works perfectly for us in this location, as soon as we walk around the corner it comes on. We have it set to stay on 5 minutes. This was easy to install even for us DIY'ers. We just ran wires from our inside outlet to the outside wall, made connections and hung. Some of the features I like: Very bright light, great sensing range, flexible adjustments for different angles and swivel. Temperature compensation circuitry reduces false triggering in extreme hot and cold temperatures. Time adjustment - 1, 5, or 10 minutes. Each fixture uses 24 mid-power LED's - total of 48 LED's so it is pretty bright! The only thing I was curious about is why it states "Hot surface do not touch" Potential high temperature! Do not touch the metal parts of the device and keep a minimum distance of 1/2 inch around the floodlight housing. Since it is LED lights I did not think they gave out any heat. Either way we made sure it was installed the 1/2 inch distance. Great flood light!

The 240-Degree White Motion Activated Outdoor Integrated LED Twin Flood Lights with 2000 Lumens was shipped in a larger box to prevent damage. It is designed to be used as a wall or top mount to a round single gang box. It has 2 wire connection and comes with a gasket, mounting bracket, screws, wire nuts, and wiring harness pig tail. The instructions are detailed with pictures. which is good as it has several features. It has a high low switch to the adjust the level of the leds and cause them to change brightness levels based on the time of night. or they can be set to full power. The dusk time can be set as well as how long the lights stay on for. The LEDS must get hot because their are metal heat sinks on the back of each light pod. A wall switch can be used as a manual over ride to keep the lights on for upto 6 hours. The lights them self's and the sensor can be moved as they are not completely in a fixed position. It has a 3 year warranty and their is a customer service number in the instructions in case you need help.

This product is packaged in a cardboard box with a photo of the item at about 70% scale. Instructions are given on a single piece of folded paper in both English and Spanish. All of the mounting hardware (nuts, screws, wire-nuts) are contained in a plastic zip seal bag. This is a very nice LED motion activated security light with an industrial look. The light uses 2 LED panels to create a wide area of illumination of 2000 lumens. The panels can be adjusted left/right and up/down. The product is made of a dark olive-brown plastic. The assembly is manufactured so that it can be mounted on a wall or under an eave by simply twisting the LED panel and sensor assembly. The light can be mounted in about 30 minutes time if you are replacing another unit. This unit has some nice adjustments to operate in a variety of situations depending on your needs. The light can have different intensity for various lighting level. On-time is adjustable from about 1 to 10 minutes after activation. Adjustments are made using 2 simple dials and 1 button that are clearly labeled. My only complaint is that the depth of the housing does not let the item do a flush mounting using the included crossbar. The mounting crossbar included with the kit protrudes the front edge of the electrical box by about 3/8”. The plastic housing of the light only offers about 1/4” of depth around the edge. If your box is recessed from the mounting surface by about ¼" it may work fine for you. I had to make my own mounting plate using a galvanized strap which I threaded 2 holes for the included mounting screws and then fastened that to my mounting block.

Over the years I've installed a lot of outdoor lighting fixtures. I have to admit I'm impressed with this IQ America ​LED​ twin flood light fixture. The first thing one notices is its mounting versatility. With a ​t​wist of its body it converts from a wall mount to an eave mount. Yes, it's made in China, but this appears to be a well-thought-out and engineered product. The easy to understand instruction sheet is well Illustrated and clearly written by someone who uses English as a first language. All the necessary parts for installation are included. The only tools you'll need is a Phillips screwdriver​, ​a flat head screwdriver and also some 100% silicone caulk​, optional but highly recommended. As a general rule I only caulk along the sides and across the top of a fixture leaving the bottom uncaulked. If any moisture does find its way into the fixture this gives it a way to drain out. The flood light heads can be individually adjusted left and right or up and down. When set up to detect motion the lights can stay on for one minute, five minutes or 10 minutes selectable by the user. There is also a ​D​usk to Dawn mode. At d​usk​, ​the ​light​s​ will turn on at 30% ​brightness ​end reduce to 15% in the middle of the night. At dawn, the light will turn off. I am impressed, this is the nicest motion sensing outdoor fixture​ I have ever installed. IQ America offers of 3 year limited warranty.

The main points I like most about this Model LM -1802.. It is straight forward installation, even for a rank novice. The two socket type plugs push easily into each other At dusk the illumination is switched on at 30% and then reduced to 15% in the dead of night when the high/low feature is set to on (This is an excellent feature when guests are expected.) And when set to off operate as a normal motion detector with a full 100% lights activated. The light it throws off is quite impressive. The stated 2000 lumens is the equivalent of an incandescent 125W Both LED lights are adjustable both up and down and to the side independent of each other. But I do miss a sensitivity adjustment switch. However, even without one, it does operate flawlessly and has a nice weight to it just short of 9LBS that makes for a good solid feel to it before installing.

When you open the box, you will find this LED flood light have Sharp Strong body better than the picture itself. It is not heavy as it is made of plastic. Molding is excellent with more stylish than normal round body light. there had two big Aluminum wing heat sink to perform better heat evaporation. Adjustment of the light is one of which I like the most, either swivel up and down or swing outward for light cover angle are both very convenience, the only the swivel up and down, you need a entirely small allen key to tight the jam lock nut. The adjustment of the Sensor is simple with clear indication and a unique mini knob switch and has a minimal feeling the notch to hold it in position. Testing the light is real bright and shoot up to 50 feet away with no problem. Overall, this LED flood light is well made with 2000 lumens brightness. It comes with installation accessories and moisture rubber sealing patch. what else, NO, YOU won't disappoint of it.

Very bright and easy to install!