High performance 2.4 GHz Digital Splitters are used for splitting a single coax line into 3 lines. These splitters are designed for applications that operate in the 5 MHz to 2.4 GHz range, which include: Satellite, Digital/HD Cable TV, Broadcast (over the air) TV, CCTV and other general purpose coaxial cable splitting requirements. Splitters support the 1 GHz to 2.4 GHz frequency range for satellite and on-demand cable television services. All ports on the 2.4 GHz splitters are power pass enabled. This allows any of the ports to be used to pass power from the satellite set top box to the satellite dish or multi-switch. All splitters include an internal printed circuit board design inside of a nickel plated zinc die cast housing which helps to improve overall splitter performance in return loss, insertion loss and port-to-port isolation measurements, resulting in a stronger, cleaner signal with more protection from outside signal interference. All 2.4 GHz splitters have a solid, sealed body for improved EMI/RFI performance. Machine formed threads on the F ports allow for smooth connector mating.
Nickel-plated housing - designed for indoor use
Pair of grounding screws eliminates the need for a grounding block
Use terminators (85-038) on all unused ports for optimal performance
EMI/RFI shielding effectiveness: -80dB
Insertion loss: 7dB to 11dB over rated frequency range
LIMITED WARRANTY - This product is guaranteed to be free from defects in material and workmanship for a period of one (1) year from date of purchase. A defective product will be repaired or replaced free of charge. Excludes defects caused by abuse, misuse, neglect, alterations or accidents. Consequential or incidental damages are not recoverable under this warranty.
Questions & Answers
Typical questions asked about products:
Is the product durable?
Is the product easy to use?
What are the dimensions of the product?
Customer Reviews
4.4
out of 54 reviews
83%recommend this product
538
49
30
22
15
Filter by:
Showing 1-10 of 54 reviews
Mar 27, 2017
I purchased a new antenna, and needed it to run three televisions in our house. Went and bought t...
I purchased a new antenna, and needed it to run three televisions in our house. Went and bought this, hooked the antenna cable into the (in) connector, the three television cables into the (out) connectors. Worked perfectly, and allows me to watch tv for free not.
The only reason I gave this four stars instead of five is because the mounting screws that come with this are to small (not long enough). My house has vinyl siding, so I had to buy longer ones.
Other that that, works great, and easy to install.
by
Response from Ron KipperMar 27, 2017
Hey cmill thanks for the feedback. If you have the splitter outside exposed to the weather it may need to get replaced sometime later as it is not designed to be outside. Much better if you can put it in an enclosure of some sort. Good luck Ron at ron.kipper@idealindustries.com
DIY
Recommended
1 found this review helpful
Jul 30, 2020
Needed it to split the satellite signal, works great....
Needed it to split the satellite signal, works great.
by
Verified Purchase
Jul 7, 2020
A new router required a three-way connection and I only...
A new router required a three-way connection and I only had the two-way splitter from the old system. Works flawllessly.
by
Verified Purchase
Jun 16, 2020
Did not work...
Did not work
by
Response from Ron KipperJun 18, 2020
Hello if I can help please let me know Ron at ron.kipper@idealindustries.com
Verified Purchase
Jun 4, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Jun 3, 2020
Had to replace it with one from Xfinity because of...
Had to replace it with one from Xfinity because of signal loss
by
Response from Ron KipperJun 8, 2020
Hi Mike let me know if I can help. All splitters have some loss to them and on a 3 way one port typically has more than the other two ports. Have fun Ron at ron.kipper@idealindustries.com
Verified Purchase
May 20, 2020
Does what it’s supposed to do.
Does what it’s supposed to do.
by
Verified Purchase
May 12, 2020
Product has easy to read label showing proper way to hook up to in and out cable lines
Product has easy to read label showing proper way to hook up to in and out cable lines
by
Verified Purchase
Recommended
May 7, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
May 1, 2020
It's just a splitter used to connect incoming lines from outside of the house by antenna.
It's just a splitter used to connect incoming lines from outside of the house by antenna.
High performance 2.4 GHz Digital SplittersHigh performance 2.4 GHz Digital Splitters are used for splitting a single coax line into three lines. These splitters are designed for applications that operate in the 5 MHz to 2.4 GHz range, which include Satellite, Digital/HD Cable TV, Broadcast (over the air) TV, CCTV and other general-purpose coaxial cable splitting requirements. Splitters support the 1 GHz to 2.4 GHz frequency range for satellite and on-demand cable television services. All ports on the 2.4 GHz splitters are power pass enabled. This allows any of the ports to be used to pass power from the satellite set top box to the satellite dish or multi-switch. All splitters include an internal printed circuit board design inside of a nickel plated zinc die cast housing which helps to improve overall splitter performance in return loss, insertion loss and port-to-port isolation measurements, resulting in a stronger, cleaner signal with more protection from outside signal interference. All 2.4 GHz splitters have a solid, sealed body for improved EMI/RFI performance. Machine formed threads on the F ports allow for smooth connector mating.View Full Product Description
High performance 1 GHz Digital Splitter isHigh performance 1 GHz Digital Splitter is used for splitting a single coax line into three lines. Designed for applications, which include: Digital/HD Cable TV Broadcast (over the air) TV, CCTV, and other general-purpose coaxial cable splitting requirements. Splitter includes an internal printed circuit board design inside of a nickel plated zinc die cast housing which helps to improve overall splitter performance in return loss, insertion loss, and port-to-port isolation measurements, resulting in a stronger, cleaner signal with more protection from outside signal interference.View Full Product Description
High performance 1 GHz Digital Splitter isHigh performance 1 GHz Digital Splitter is used for splitting a single coax line into two lines. Designed for applications, which include: Digital/HD Cable TV Broadcast (over the air) TV, CCTV, and other general-purpose coaxial cable splitting requirements. Splitter includes an internal printed circuit board design inside of a nickel plated zinc die cast housing which helps to improve overall splitter performance in return loss, insertion loss, and port-to-port isolation measurements, resulting in a stronger, cleaner signal with more protection from outside signal interference.View Full Product Description
Structured Media 1x6 (6-Way) 2GHz Passive Video Splitter - White
Use 4-, 6- and 8-way 1GHz Passive Video SplittersUse 4-, 6- and 8-way 1GHz Passive Video Splitters and Passive Video Splitter modules to split digital cable, quality cable TV and off-air signals to 4, 6 or 8 televisions throughout a home or office. The Video Splitter modules are designed for easy installation in any Leviton 140, 280 or 420 structured media enclosure. The Video Splitters are easily installed in Leviton MDU enclosures or used in any application where a passive video splitter is needed. These units feature die-cast housings and printed circuit board construction.View Full Product Description