Internet #100178160

Model #DMG-00

Deluxe Mounting Gasket for InSinkErator Badger and Septic Garbage Disposals

  • Genuine InSinkErator replacement part
  • Muffles disposal noise and prevents splash back
  • Easy installation
  • See More Details

Frequently Bought Together

+
+
Price:
$637

Product Overview

Replacement sink gasket designed specifically for use with Badger Series and Septic Disposers. The InSinkErator exclusive Quick Lock sink mount enables quick and easy gasket replacement. Not for use with Evolution Series.
  • Use Deluxe Mounting Gasket with 555ss, 777ss, 100ss, Pro SS and Pro 77 models
  • Refer to installation instructions for proper fitting
  • Prevents water and food particles from splashing up
  • Designed to muffle disposer noise

Specifications

Dimensions

Product Depth (in.)
3.88
Product Height (in.)
1.25
Product Width (in.)
3.88

Details

Brand Compatibility
InSinkErator, Badger
Color Family
Black
Color/Finish
Black
Garbage Disposal Part Type
Gasket
Kitchen Product Type
Disposal Accessory
Model Compatibility
777ss, 555
Part Type
Baffle
Returnable
180-Day

Warranty / Certifications

Manufacturer Warranty
None

Questions & Answers

10Questions18Answers

I have a Kenmore Model #1160. Is this a correct substitution for the OEM part (Item # A034871815)?

Asked by NeedAGasket October 28, 2020
1
Answer

Hey, to make sure that you're getting the correct part for your disposer, it would be best to contact Kenmore at (888) 536-6673.

will this fit a model 77-92

Asked by Ted September 28, 2020
1
Answer

Yes Ted, it will fit the model 77-92.

Does this fit the Badger 5?

Asked by James July 13, 2020
1
Answer

Hi James, Badger 5 uses the Standard Mounting Gasket (Model: SMG-00 or Part# 09963D).

In what part of the garbage disposal system does this gasket go? Does it get installed onto the ...

Asked by gogo June 29, 2020
2
Answers

Calling it a "gasket" creates some confusion. It's the black flexible spray shield you see when you look down into the sink drain. In my manual it's called the "Mounting Gasket/Splash Baffle." The original gasket in my Insinkerator 555ss sagged and no longer contained the spray while the unit was operating. It's been a couple of years since I replaced the gasket, but it wasn't a difficult task. Just follow the instructions. If I'm remembering correctly, I had to unplug the unit, disconnect the plumbing, and then rotate the "lower mounting ring" to unlock and lower the unit in order to access the gasket. I put an up-side-down milk crate under the disposal so I wouldn't drop it when I disconnected it. You can find some helpful videos on the manufacturer's web site.

Does it fit a moen?

Asked by Mi December 1, 2019
2
Answers

Doubt it as it is designed for the InSinkErator. Buy then I am not a sales person or a factory rep, so what do I know other that it was recommended for what I have.

does this fit badger 15ss model

Asked by jack October 17, 2019
3
Answers

Hi Jack, the Standard Mounting Gasket is the one you should use for this model. It's part no. SMG-00.

Does this fit a Badger 5?

Asked by John March 26, 2019
2
Answers

No, you have to use the Standard Mounting Gasket for Badger models. It's part# SMG-00.

Hi, will this fit a badger insinkerator 500 ? Thanks

Asked by blue January 29, 2019
2
Answers

Yes. It fits perfectly.

will this fit a model InSinkERATOR 77-7 , S/N RM 62783961

Asked by Mari September 13, 2018
3
Answers

I used the gasket for a model 555. If you mean a model 777, InSinkerator shows the same part number (1010A) for both 555 & 777 models so I believe it should work.

Will this fit the model 5–38, serial number RA 59348575?

Asked by Chico June 29, 2016
1
Answer

Hi, this is Jerica from InSinkErator® Customer Service. All Badger disposers including the Badger 5-38 model use a standard mounting gasket. You may get this by purchasing an InSinkErator Mounting Gasket Kit (MGK-00). This kit includes one standard and one deluxe mounting gasket. The gaskets are properly labeled for your convenience. If you have questions, please do not hesitate to contact us through insinkeratorfeedback@emerson.com or call InSinkErator AnswerLine at 1 (800) 558-5700. Thank you.

Deluxe Mounting Gasket for InSinkErator Badger and Septic Garbage Disposals - page 2

Customer Reviews

  • 19 Customer Reviews
  • 4.4 out of 5 stars overall
100% of customers recommended.
Overall Ratings
5star-icon(14)
4star-icon(2)
3star-icon(0)
2star-icon(1)
1star-icon(2)
Sort By:
Was a perfect fit for the Pro-77 disposal.
Was a perfect fit for the Pro-77 disposal.
Was this helpful?
1
0
Good product, good price, prompt shipping....
Good product, good price, prompt shipping.
Was this helpful?
0
0
It was the wrong part. It says it would...
It was the wrong part. It says it would fit are model garbage disposal however did not fit. Took it back.
Was this helpful?
0
0
Response from InSinkEratorAugust 20, 2020
Hi, I’m sorry for any inconvenience this may have caused you. The deluxe mounting gasket are compatible with models 555ss, 777ss, 100ss, Pro SS, and Pro 77 disposers. It’s not for use with Badger or Evolution Series® disposers. Should you still need assistance, please feel free to contact us at insinkeratorfeedback@emerson.com and we’d be happy to help!
Fit like a glove. Good seal. Works as intended. I...
Fit like a glove. Good seal. Works as intended. I originally bought the wrong diameter size, but once I dropped the garbage disposal and measured the diameter properly the product fit. Let that be a lesson not to assume the size.
Was this helpful?
0
0
The item fit and seems to work well. The...
The item fit and seems to work well. The only reason for removing a star is that this design requires the whole disposal had to be pulled out to put the gasket into place, rather than installing it on the sink side, like our previous disposals. Poor design for a regularly maintained item is a hassle.
Was this helpful?
2
0
did not work need to return.
did not work need to return.
Was this helpful?
1
0
Response from InSinkEratorMay 1, 2020
Hi, I'm sorry for the inconvenience. The InSinkErator Deluxe Mounting Gasket is for use with old InSinkErator models like the 555ss, 777ss, 100ss, Pro SS, and Pro 77 disposers. It's not for use with Badger or Evolution Series® disposers. Your feedback is important to us and will be shared with our product marketing team.
Nothing spaticular. I needed a new one. Bought it, installed it and it works like it is susposed ...
Nothing spaticular. I needed a new one. Bought it, installed it and it works like it is susposed to. Fit, form and function.If yours is worn or starting to deterioate, get a new one.
Was this helpful?
1
0
well made...
well made
Was this helpful?
0
0
Insinkerator has two sized standard (SMG) and deluxe (DMG) mounting gaskets. Make sure you get t...
Insinkerator has two sized standard (SMG) and deluxe (DMG) mounting gaskets. Make sure you get the right one. For a few bucks more, HD sells both together, which guarantees you have the correct size - but what do you do with the extra one?
Was this helpful?
1
0
It fit perfectly....
It fit perfectly.
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers