#1 Home Improvement Retailer

Genesis 30 in. x 31 in. Stainless Steel Backsplash

$23900
Apply Now
Pay $214.00 $239 when you open a new card. info
Apply for a Home Depot Consumer Card
  • Made of 304 stainless steel to ensure long-term use
  • Comes with molding to cover space behind the slide-in stoves
  • Adds a clean and modern look to your kitchen decor
  • View More Details
How to Get It

Frequently Bought Together

+
+
Price:
$23900

Product Overview

This 30 inch Genesis backsplash is made of 304 Stainless steel. Perfect sleek modern look to complete your kitchen decor. Height adjustment is possible which makes this backsplash convenient for new-generation slide-in stoves and regular freestanding stoves. Includes molding to close the space behind slide-in stoves.
  • Genuine stainless steel
  • Harmonizes with a variety of kitchen environments
  • High end look for less
  • Easy maintenance
  • Simple and fast installation
  • Adds a luxury touch to the room
  • Same day backsplash
  • To be use with slide-in and freestanding stoves

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Peel and Stick Backsplash

current product
Genesis 30 in. x 31 in. Stainless Steel Backsplash
Delta 30 in. x 32 in. Stainless Steel BacksplashNew18.5 in. x 24.3 in. Artnouvo Decorative 3D PVC Backsplash Panels in Crosshatch Silver with 30-Pieces29.5 in. x 29.5 in. Stainless Steel Backsplash with 2-Tiered Shelf and Rack in Stainless Steel
BrandInoxiaInoxiaINNOVERA DECOR BY PALRAMAncona
NameGenesis 30 in. x 31 in. Stainless Steel BacksplashDelta 30 in. x 32 in. Stainless Steel Backsplash18.5 in. x 24.3 in. Artnouvo Decorative 3D PVC Backsplash Panels in Crosshatch Silver with 30-Pieces29.5 in. x 29.5 in. Stainless Steel Backsplash with 2-Tiered Shelf and Rack in Stainless Steel
Price
$23900
$27900
$28697
/case
$39999
Ratings
(25)
(11)
(0)
(0)
MaterialStainless SteelStainless SteelPVCStainless Steel
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Height (in.)30 inProduct Length (in.)31 in
Product Thickness (in.)0.038 in

Details

AntimicrobialAntimicrobialBacksplash typeWall-mounted
Color FamilyMetallicColor/FinishStainless steel color and brushed finish
Edge TypeFlatFeaturesStain Resistant
High Temperature ResistanceStainless steel productKitchen Product TypeBacksplash
MaterialStainless SteelReturnable90-Day
Scratch ResistantNoStain ResistantYes

Warranty / Certifications

Manufacturer WarrantyINOXIA INC. warrants its accessories to be free from all manufacturing defects for a period of one (1) year from the date of purchase.

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.8
    out of 25 reviews
  • 100%recommend this product
Filter by:
Showing 1-10 of 25 reviews
Great way to modernize your kitchen!
It's great. Easy to install. Measurements were perfect.
by
  • Verified Purchase
  • Recommended
Easy installation
Easy to install. The only issue I had was relocating my electrical out let to accommodate the length of the backsplash. Easy fix using a retro fit outlet box perched at Home Depot.
by
    • Recommended
    Amazing look and build.
    Installed easily as instructed. Looks amazing and professional.
    by
    • Verified Purchase
    • Recommended
    Very nice backsplash.
    It’s a raised panel (1/4”) to allow for backsplash tile. The trim piece does not accommodate all ranges.
    by
    • Verified Purchase
    • Recommended
    Looks nice but mounting is silly
    PROS: The metal is quality and looks nice. It is close enough to our range hood that you can't see a difference unless you really look closely. CONS: 1) Ours was made a bit out of square so there is a small gap at the top corner on one side that decreases as you move across the backplash and the top left corner is wider than the range hood by a small amount. 2) Ours was also made with a slight bend in it across the middle. Since the sides are rolled for strength, that causes the top corners to pull away from the wall. More on this below... 3) It mounts on a piece of styrofoam. This compounds the issue of the bend mentioned above because the foam and the foam adhesive are not strong enough to keep the top corners in place, and, because our walls are finished, we can't screw blocks in to the wall to attach a board to push it against the wall while the adhesive sets. Adding nails or screws at the bottom to hold it up does not solve the issue, it just helps prevent sagging of the backsplash while the adhesive sets. 4) Using styrofoam also means a lot of people will use the wrong type of adhesive and burn through the foam, causing the mounting system to fail. (you could potentially remedy this by using plywood to mount to the wall and attaching the PL Premium or something. That is what we are going to try next to hope it will grab stronger and prevent the corners from pulling out) I contacted the manufacturer about these issues and after about 2 weeks they finally responded and said I should just return it and get a new one. It would have been nice to have been offered a credit or something to compensate my time and screwing around to make it work.
    by
      Looks good!
      It looks nice now that its up but I found it odd that it has a separate foam panel that screws to wall and then you glue panel to the foam. I hope I never have to take it down. And one corner didn't stick as well to wall...not sure if screw pulled through foam so we had a to find a way to correct it without removing it because it was glued. There must be a better way especially for the price.
      by
      • DIY
      • Verified Purchase
      • Recommended
      1 found this review helpful
      Great backsplash
      Great backsplash! It was a perfect fit behind my new range which doesn’t have a “backsplash” back. There are several things which are good to know before installing the backsplash: * Measure the space where it will go to make sure that it will fit - mine did fit with 0.5 mm to spare at the top! * The backsplash is glued with a silicone adhesive, which is not included. The Genesis model needs approx. 150 ml/6 oz to attach both the panel and the backsplash. * The panel is styrofoam and not wood as specified in the linked installation instructions.
      by
      • Verified Purchase
      • Recommended
      Great looking end product
      The instructions come with a QR code to a link for YouTube. Pretty easy to follow after that.
      by
      • Verified Purchase
      • Recommended
      Nice!
      Easy to install, and give my kitchen a modern look.
      by
      • Verified Purchase
      • Recommended
      Excellent product
      Looks fantastic. Very easy installation with clear instructions.
      by
      Response from InoxiaTeamMay 19, 2021
      Hi John,
      Thanks for the review! We're glad that you like your new Genesis Stainless Steel Backsplash! Inoxia
      • Verified Purchase
      • Recommended
      Showing 1-10 of 25 reviews