#1 Home Improvement Retailer

Internet #202035433

Model #9000525

Store SKU #236579

HardiePanel HZ10 5/16 in. x 48 in. x 96 in. Fiber Cement Primed Cedarmill Vertical Panel Siding

  • Primed Fiber Cement Panel Siding ready for exterior acrylic paint
  • Durable vertical house siding panel with a woodlike grain finish
  • HZ10 made for hot, humid, tropical storms and hurricane winds
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

James Hardie HardiePanel Cedarmill Vertical Siding is a fiber cement siding designed to mimic the look of real wood siding with less maintenance, better wear and a long life. HardiePanel exterior panel siding is Engineered for Climate and designed to hold up to the changing weather conditions in the environment where it is installed. Noncombustible cladding complies with ASTM E136, does not burn and will not attract insects and pests including woodpeckers and termites. HZ10 formulated house siding is made to withstand high temperatures, humidity, moisture, sun, hail, tropical storms and hurricane winds. Board is pre-primed using a primer with a yellow hue allowing for maximum paint adhesion on the jobsite. Paint it any color within 180 days of installation using an acrylic water-based exterior house paint.
  • Durable, fiber cement siding withstands the toughest weather conditions
  • Natural cedar look house siding with a woodlike grain texture resists water absorption to protect against swelling and cracking
  • Board resists cracks, splits, rot and other damage from sun, heat, humidity and strong hurricane force winds
  • Noncombustible, resists flame spread making for a safer home
  • Fiber cement siding stays strong and does not appeal to woodpeckers, termites and other pests
  • 5/16 in. x 48 in. x 96 in. panel for vertical installation
  • Siding is factory primed using a primer with a yellow hue - paint with an acrylic exterior house paint within 180 days of install
  • Complies with ASTM E136 as a noncombustible cladding that is recognized by fire departments across the U.S.
  • Limited 30-year non-prorated, transferable, siding substrate warranty
  • Visit the Pro Desk at your local Home Depot store for more siding choices from James Hardie
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Actual Product Length (in.)
96.0
Actual Product Thickness (in.)
0.312
Actual Product Width (in.)
48.0
Coverage Area (sq. ft.)
32
Product Length (in.)
96
Product Thickness (in.)
.312 in
Product Width (in.)
48

Details

Color Family
Gray
Color/Finish
Primed
Finish Type
Primed
Material
Cement
Product Weight (lb.)
76.8
Profiles
Panel
Siding Features
Pre-Primed
Siding Type
Panel
Vertical or Horizontal
Vertical

Warranty / Certifications

Manufacturer Warranty
30-Year Limited Warranty

Questions & Answers

13Questions12Answers

I have a shed in my yard. Can James Hardie vertical panel siding be nailed directly to the 2x4 f...

Asked by sls907 February 11, 2021
1
Answer

Yes, if the shed does not need any shear value. It needs to have corner bracing or blocking to be able to go directly to stud.

Can I buy panels that are 9ft or 10ft long? 8ft long will not work for me. And can I order from H...

Asked by Michael May 18, 2020
1
Answer

We make them in 4X8,9 and 10 sheets. Check with the retailer for product availability of the larger sizes.

Does James Hardie “HardiePanels” come in a smooth surface? Thank you

Asked by NASCAR May 18, 2020
1
Answer

Yes, we make a Hardie Panel in Smooth

Can this be used as a soffit?

Asked by JoeV April 11, 2020
1
Answer

Yes, it can be used as soffit but you will have to follow the soffit installation requirements

Can I get the outside panels in 4 by 9 foot panels and can u nail it up with a nail gun or do u s...

Asked by Sg April 5, 2020
1
Answer

You can use a siding gun or a framing nail gun to install our panels

Can I install it as a ceiling instead of sheet rock? Thx

Asked by Al February 14, 2020
1
Answer

Yes, just as long you are not required to have a 1 hour fire rated ceiling.

These sheet can be use horizontally?

Asked by Roque July 29, 2019
2
Answers

Yes, they can be installed horizontally.

Can i hang this panel any side ? Or the face of the panel has to be in the exterior necesary?

Asked by Felipe May 22, 2019
1
Answer

Yes , either side can be used but you would have to prime the backside if you leave it exposed.

how do you cut this siding ?

Asked by 338 March 5, 2019
2
Answers

There is a special blade you can buy for your circular saw.

when installing these panels does it require batting or can thr seems be caulked and if so which caulking is recommended

Asked by JonCarpenter February 2, 2019
1
Answer

Vertical Joints can be Installed in moderate contact or you can leave a gap and caulk (Not applicable to Color Plus® Finish) For best results use an Elastomeric Joint Sealant complying with ASTM C920 Grade NS, Class 25 or higher or a Latex Joint Sealant complying with ASTM C834. Caulking/Sealant must be applied in accordance with the caulking/sealant manufacturer’s written instructions.

HardiePanel HZ10 5/16 in. x 48 in. x 96 in. Fiber Cement Primed Cedarmill Vertical Panel Siding - page 2

Customer Reviews

  • 4.7
    out of 18 reviews
  • 100% recommend this product
Filter by:
Showing 1-10 of 18 reviews
Need to be gentle while transporting. When installed it is great stuff. I used it for the top in ...
Need to be gentle while transporting. When installed it is great stuff. I used it for the top in the picture.
by Coty
It was easy to cut and install. The painters have not got here yet though
It was easy to cut and install. The painters have not got here yet though
by HomeDepotCustomer
I have a cedar board and batting house in the foothills of Corvallis. We have a big garage worksh...
I have a cedar board and batting house in the foothills of Corvallis. We have a big garage workshop that is corrugated metal. We are using this board with cement fiber batting to match the house. This board is excellent...strong, takes paint, heavily rot resistant and totally bug resistant. It is a perfect match and replacement for cedar sheet board and should last a lot longer.
by SeanTheHandyman
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Very good product especially in wet conditions. Very messy/dusty when cutting. Buy a diamond cutt...
Very good product especially in wet conditions. Very messy/dusty when cutting. Buy a diamond cutting blade on your circular saw.
by Rick
Best material to cover any exterior project ...
Best material to cover any exterior project
by HomeDepotCustomer
Easy to use, lightweight and did the job!...
Easy to use, lightweight and did the job!
by HomeDepotCustomer
Easy to deal with and cut with the proper blade. It looks fantastic and takes paint so nice. I wo...
Easy to deal with and cut with the proper blade. It looks fantastic and takes paint so nice. I would side an entire house with this if it needed it.
by Dave
5 Star Review
Rating provided by a verified purchaser
by HomeDepotCustomer
4 Star Review
Rating provided by a verified purchaser
by HomeDepotCustomer
Showing 1-10 of 18 reviews