Model # 215518

Internet #100064049

Store SKU #462260

James Hardie HardiePlank HZ10 5/16 in. x 8.25 in. x 144 in. Fiber Cement Select Cedarmill Lap Siding
0727396155182

James Hardie

HardiePlank HZ10 5/16 in. x 8.25 in. x 144 in. Fiber Cement Select Cedarmill Lap Siding

  • Fiber cement siding resists cracking, rotting, swelling and pests
  • Our Select Cedarmill finish has a soft texture that mimics wood
  • Pre-primed and engineered to enhance the performance of paint
$748 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Installation Options

Product Overview

  • Fiber cement siding resists cracking, rotting, swelling and pests
  • Our Select Cedarmill finish has a soft texture that mimics wood
  • Pre-primed and engineered to enhance the performance of paint
All HardiePlank lap siding comes in a variety of looks and textures, all of which are Engineered for Climate. We are so sure about how well the HardieZone system will perform, HardiePlank lap siding comes with a 30-year no prorated, transferable, limited warranty - our strongest warranty ever.
  • Resists damage from moisture
  • Resists cracking, splitting, rotting and swelling
  • Resists termites and insects
  • Superior performance in high wind and hurricane areas
  • Resists flame spread
  • Complete exterior available in lap, shingle, panel, fascia, trim and soffit
  • Paint lasts longer than on wood
  • Pre-primed or available in ColorPlus Technology a factory applied color finish with a variety of color options
  • Please see the ProDesk associate for color options available
  • Note: Product may vary by store

Product Overview

  • Fiber cement siding resists cracking, rotting, swelling and pests
  • Our Select Cedarmill finish has a soft texture that mimics wood
  • Pre-primed and engineered to enhance the performance of paint
Model #: 215518
Sku #: 462260
Internet #: 100064049

All HardiePlank lap siding comes in a variety of looks and textures, all of which are Engineered for Climate. We are so sure about how well the HardieZone system will perform, HardiePlank lap siding comes with a 30-year no prorated, transferable, limited warranty - our strongest warranty ever.

California residents: see   Proposition 65 information

  • Resists damage from moisture
  • Resists cracking, splitting, rotting and swelling
  • Resists termites and insects
  • Superior performance in high wind and hurricane areas
  • Resists flame spread
  • Complete exterior available in lap, shingle, panel, fascia, trim and soffit
  • Paint lasts longer than on wood
  • Pre-primed or available in ColorPlus Technology a factory applied color finish with a variety of color options
  • Please see the ProDesk associate for color options available
  • Note: Product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
144
Product Height (in.)
0.312
Product Length (in.)
144
Product Width (in.)
8.25
Thickness (In.)
.312

Details

Color Family
Gray
Material
Cement
Paintable/Stainable
Yes
Profiles
Dutchlap
Siding Features
Pre-Primed,Wood Grain Surface
Siding Type
Lap Siding
UV Protected
No
Vertical or Horizontal
Horizontal

Warranty / Certifications

Manufacturer Warranty
30-Year Limited Warranty

Specifications

Dimensions

Product Depth (in.)
144
Product Height (in.)
0.312
Product Length (in.)
144
Product Width (in.)
8.25
Thickness (In.)
.312

Details

Color Family
Gray
Material
Cement
Paintable/Stainable
Yes
Profiles
Dutchlap
Siding Features
Pre-Primed,Wood Grain Surface
Siding Type
Lap Siding
UV Protected
No
Vertical or Horizontal
Horizontal

Warranty / Certifications

Manufacturer Warranty
30-Year Limited Warranty

Questions & Answers

how do i deternin how much to order

Asked by: snuffy
The best I way I can answer this is for you to consider the over hang in your application. Suggesting 1"-1 1/4" over hang. So if you go 1", that gives you a 7.25" coverage, take that and X 144" length = 1044" sq Divide that by 12" 2 (to determine sq ft) = 7.25 example of coverage: 12' lt x8' ht = 96 sq ft div. by 7.27 sq ft = 13.25 pcs. Hope that helps
Answered by: MarcusIII
Date published: 2018-01-03

Can I install it over the present would siding? Should I put a barrier between them. House was ...

Can I install it over the present would siding? Should I put a barrier between them. House was built pre-1950
Asked by: Teresa
Hello, I would probably not; but, it depends on the type and condition of the wood siding. It may void the manufactures warranty or guarantee. I usually will follow the manufactures installation recommendation. Please check out https://www.jameshardie.com/d2w/installation/hardieplank-hz5-us-en.pdf
Answered by: Henry
Date published: 2018-01-05

Where can I get this but with the smooth finish?

Does Home Depot carry this stuff but with the smooth finish? If not where can I buy it?
Asked by: Michael55451
I used the back (smooth side) with great results.
Answered by: AJdiy
Date published: 2017-10-31

Plan to install over 7/16" OSB applied to Douglas Fir 24" OC studs. Must the studs be dry lumber ...

Plan to install over 7/16" OSB applied to Douglas Fir 24" OC studs. Must the studs be dry lumber or can I use the GN stuff from Home Depot?
Asked by: Muse
You can but I would not recommend it. Moisture trapped would eventually rot out the wood studs and moisture can migrate through the Hardi-plank siding and blister painted surfaces.
Answered by: AJdiy
Date published: 2017-08-28
  • y_2018, m_1, d_22, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_170
  • loc_, sid_100064049, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 96ms
  • QUESTIONS, PRODUCT

Customer Reviews

HardiePlank HZ10 5/16 in. x 8.25 in. x 144 in. Fiber Cement Select Cedarmill Lap Siding is rated 4.5 out of 5 by 19.
Rated 5 out of 5 by from This product was exactly what I expected. It is... This product was exactly what I expected. It is high quality, very flexible, and quite heavy in 12 foot lengths. You need at least one person to help you lift and hold in place while you nail. You must use a nail gun. This cement board product will dull a high speed steel drill bit in three or four holes, so forget using screws. A regular hammer and nails takes too much time with bent nails, multiple strokes on each nail that does not bend. You also need a specific blade for cutting cement fiberboard on your cross cut saw and your skilsaw (for gable angle cuts). Wood cutting carbide tipped blades will not work. The result is a beautiful upgrade for any home that currently has T-111 plywood or other flat panel siding.
Date published: 2017-09-06
Rated 4 out of 5 by from Hardie Plank may not be the best in its class but it was, I think, the only one offered at Home D... Hardie Plank may not be the best in its class but it was, I think, the only one offered at Home Depot. Also, was recommended to me. I just yesterday finished installing 23 twelve foot 8.25" wide 5/16" panels on the side of my garage using Gecko Gauges (which are great!) in a single person installation. I flashed the interior joints with coated aluminum strips cut to 5" x 10", per Hardie's recommendations. Primed all cut edges. My cuts were made by Hardie's recommendation, score and snap, which worked very well for me. To facilitate that, I bought a carbide scoring tool, which was well worth the investment. I also used a utility knife to deepen the scoring and to clean up the edges. I did this on both sides of the planks before bending them over the raised edge of a speed square, both ways to achieve the break. Since I have a Sureform, I used it to further clean up the edges, kept my vacuum handy to suck up the nasty dust. I wore an N95 dust mask throughout the installation. One thing to be aware of is that the dimensions of these planks are not reliable. Most were fine, but 2/3 way up the wall suddenly one plank came up almost 1/2" short. I did buy one extra plank, so I had a remedy. When offloading the planks from the Home Depot truck I borrowed, the first plank broke as I was moving it to the garage. The fairly strong wind at the time had something to do with that mishap. I was more careful with the other 23 planks. The broken plank, I had set aside in case I could use the pieces and they did come in handy to fix misfitting panels. I also found that the width of the planks isn't totally reliably 8.25". I figured it's more important to have the bottoms of the planks line up than the tops. Rather than shimming the Gecko Gauges, I just applied some force with my hands when nailing the planks into the studs through my 7/16" OSB sheathing. I used 2.5" rim shanked stainless nails for nailing and predrilled the holes in the planks using a 1/8" carbide tipped drill bit on my cordless drill. My particular garage was a huge challenge because that wall wasn't planar -- it's crooked. To make matters worse, it's basically nowhere plumb and worst of all, the top plate and foundation are far from parallel. There's also an inflection point, a point between studs where the foundation suddenly angles down. This all meant that I couldn't do a standard installation but had to install an extra stud at the inflection point and have all plank courses have a break at that point. The resulting joints are wedges, not moderate parallel joints such as Hardie recommends. I'm going to caulk those joints even though I flashed them, using Dap Side Winder. My trim is 2x4's. I'm going to paint today after the caulk dries sufficiently, it's going to rain tomorrow!
Date published: 2017-11-02
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2018-01-17
Rated 5 out of 5 by from EXCELLENT!!! This lap siding not only looks good but I think is the best product on the market. Its not the cheapest stuff on the market but it goes up so fast and easy and then comes pre primed on top of it. With some simple and fairly in expensive tools out there that can keep the sides perfectly level as you proceed up the wall it is really fast. Keep factory cuts next to factory cuts. Wonderful product all in all highly recommend it Bugs dont want it, fire resistent. Only thing I can knock on it, and it maybe to hard to handle but on long homes, 12' sections can be a pain. Would not mind some 16' or even 20'.
Date published: 2009-07-11
Rated 5 out of 5 by from Simply The Best This is the second time I have used this siding. Once to side my entire last house and now for my garage addition on a new house. This stuff is good quality. I really wanted to try LP Smartside, but just couldn't do it. The Hardi is a little more tedious to install, but the piece of mind of having it on once the install is complete makes the extra work well worth it. I have shears and a cement board saw blade and pretty much never went back to using the shears after using the saw blade. It is not good for your lungs to breath in the silica particulate, but I don't think it is a big deal if you are working outside and only do a couple installs in your lifetime. If you were doing it everyday, you would need the speed of the saw....I found it helps to set my leaf blower on idle on the work piece blowing the dust away as I cut. I try to do gang cuts when possible, but it seems that that many single cuts are invariably required for one reason or another. The Gecko siding gauge is a MUST HAVE if you are doing it solo and I would use them even if I did have someone to help me. I use the Rigid coil roofing nailer. It does a pretty good job of not over driving the nails.
Date published: 2014-12-17
Rated 5 out of 5 by from Great Stuff This is really nice siding. It's pretty easy to put up and is very durable. The pics are 2 or 3 years since it's been up and it still looks great.
Date published: 2016-03-17
Rated 5 out of 5 by from best ever used I have built 3 sheds using this siding. The oldest is 25 years old now, and has only had to be painted once due to paint fading in the sun. Easy to use, easy to hang, and easy to maintain. I am buying more this weekend to do a remodel (replacement) of rotted wood siding on a 40 year old building. Only drawback is the dust made when using a saw to cut, but wearing a dust mask definately helps in that area
Date published: 2015-06-25
Rated 5 out of 5 by from Great product I started putting my diy siding project about 6 years ago and have finally reached the final side this year. The point is not that I have procrastinated. The point is that the siding that I put on 6 years ago still looks brand new and the paint looks like it was just painted yesterday still.
Date published: 2014-04-12
  • y_2018, m_1, d_22, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_, sid_100064049, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 115ms
  • REVIEWS, PRODUCT