There are 11 pieces per bag. So in the 8 bag bundle you will get 88 pieces total.
8 bags covers 1307sq ft
It is intended for steel stud use, but we only offer it in lengths of 8 ft. The insulation can be butted up against itself if you need to cut pieces out to completely fill the space.
Yes, the 16" wide fiberglass insulation was designed specifically for installation in Steel Stud systems.
I would contact Home Depot with that question, we are the manufacturer and we sell to distributors like Home Depot.
Joe, there are 11 batts per bag. Thank you for considering our product.
The product you need for your project depends on your stud size and if it has a facer on it or not. If your basement studs are deeper than 4" you may need a higher R-value product. In most cases, you also need a vapor retarder for exterior walls which this product is unfaced (no vapor retarder).
Hello Adam, Thank you for your interest in Johns Manville's unfaced fiberglass insulation. The current product could be either brown or white. In the near future, the entire product line will white. Best regards, Doug Fast
Hello CWR, Thank you for your interest in Johns Manville's unfaced fiberglass insulation. The R-13 product is manufactured to a nominal thickness of 3.5" . A 10.25" thick product would be either the standard R-30 product or the high performance R-38c "cathedral ceiling" batt product. The R-value and thickness should be clearly marked on the package. What you are describing, R-13 at 10.25", would be incorrect. Best regards, Doug Fast