Pro-Series 9 in. Xenon White Under Cabinet

does not connect into existing Juno Pro-Series lights now installed.

The dimension of this fixture is 9.5" not 9" like stated. This wasted my time as the 1/2" was enough to not allow this fixture to be installed.

Working well so far!

Easy to install. NIce warm glow. Love the high/low rocker light switch option. High when I'm cooking, low for soft warm lighting in the kitchen. Kichler discontinued a very similar light. I was so happy that I was able to find replacements that are almost identical in dimensions and appearance.

These are one of the few under-cabinet lights that is thin enough to actually fit up under the standard cabinet lip (1"). Additionally, they look nice and have a quality look and feel. Easy to mount, We hard wired with "Romex" as we are building the whole kitchen and were able to run the wiring from all of the cabinets to a wall switch. These can be also run as "plug-in" and have high-off-low switches on them. I find it odd that the 9" models that have just one bulb, do not have the bulb centered in the middle of the lens (left to right). It's off by about 3/4". Once installed, this is not apparent in the beam pattern and lighting though. NOTE ON DIMMING - the HD product info AND the JUNO web site say that a standard dimmer can be used on the electronic low voltage lights (we are using Lutron Skylark switches, due to the availability of the dual dimmer switches ... two dimmer sliders per switch housing .... we have 8 lighting circuits in the kitchen). The instruction sheet that comes with the lights says that you must use a dimmer that is designed for the electronic low voltage lighting. Well, we already had the standard dimmers due to the prior info (and the electronic dimmers do not come as dual units), so we have these in use. When the lights are set to the high setting (on the light unit switch), the lights will eventually start to pulsate with the dimmer at anything but high. If we set the lights to the low setting (with is usually plenty of light, with all of our other lighting; overhead task and main room) they do not pulsate regardless of the dimmer setting.