- Use for outdoor low voltage connections
- Waterproof Dialectric Silicone Sealant
- Connect from 2 to 4 wires
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Product Details
About This Product
The K-IT Waterproof Wire Splice will be the first wire connector of its kind. Powered by Melni's Western Splice Technology, the K-IT Wire Splice takes 2 wires per side and twists them together around a conductive axis creating a solid connection between the wires. The housing is filled with dielectric grease to maintain a waterproof environment for the connection to avoid corrosion in wet or damp locations. This is an ideal choice for outdoor low voltage electrical connections exposed to moisture of any kind or dust.
Highlights
- Indoor/Outdoor applications ( sprinklers, mechanical, outdoor lighting, etc.)
- Waterproof and corrosion proof
- 12-24VDC applications ONLY
- Minimum capacity of 2-4 of #22 wires
- Maximum capacity of 2-4 of #18 wires
- Filled with a dielectric grease sealant that surrounds splices
- solid copper and/or braided wire any combination
- Keeps wires in-line for easy tracing
- Aligning tabs for correct wire connection
- Twist Like a Candy Wrapper
- Return Policy
Product Information
Specifications
Details
Commercial/Residential | Commercial, Residential | Irrigation System Component | Connector |
|---|---|---|---|
Pack Size | 5 | Package Quantity | 5 |
Returnable | 90-Day |
Warranty / Certifications
Manufacturer Warranty | 1 year warranty against manufacture defects |
|---|
Questions & Answers
Can these be buried?
Wesl I u2.....thanks for the question. They could be buried. They are dielectric grease filled to protect from dirt and moisture. KJ
Can these wire connectors be buried directly? Thanks! -SH
StevePerry .... the K-It connectors can be buried as they are dielectric grease filled to keep water and debris away from the wires. Thanks KJ
I have a red and black wire which needs to connect to a red and black wire. Is this possible? There are no markings for a line and neutral
John.....Thanks for reaching out. No you cannot cross connect and have them work properly. They are a same wire connection. The black wire with the black wire would go into one wire connector and the red and red wire would go into a second connector. All wires that are being connected with the connector should be on the same circuit. If you have further questions please let me know. Thanks for using the K-it products.
Can they be reused and or repacked with grease should the down stream equipment need to be replaced?
Danny....They cannot be reused as they are intended to be used and to hold the wires. Once wires are inserted and they are twisted together they will not go backwards. If you twist them without wires in them you can go one direction but are not able to turn them backwards. The only thing you could do is to cut the wires and attach a new strand and wire to add the extra equipment that may need to be replaced. We cut them out and put in new K-It wire connector with new wire between the connections when we are replacing them or adding equipment to our lines. anything else please contact us at kjketterlingenterprises@gmail.com
Can this connector be used for connecting trailer electric brake wires?
Yes you can use them for trailer and brake and electrical brake wires. We have people purchasing them for all types of recreational vehicles, trailers, lights, etc. They are very good because of the tight connection it is water proof and they can put more than 2 wires into the connection if they need wires to split and go other directions like brake and lights. Make sure you strip the wire 1 inch and get it pushed all the way in to make a good connection when they twist. With the braided wire twist it so it goes into the connecrion hole smooth. The twist you want 1 1/2 or two for the braided wire. Please advise if you need anything else kjketterlingenterprises@gmail.com
Viewing 1-5 of 5
Customer Reviews
3.8 out of 5
5
21
4
2
3
2
2
1
1
9
Customers say the K-IT wire connectors are user-friendly and effective, particularly appreciated for their waterproof feature, making them ideal for outdoor applications. Many users found the installation process straightforward once they understood the importance of aligning the tabs and stripping the wires adequately. However, some customers noted that the instructions could be clearer, and a few experienced challenges with making secure connections initially. Overall, the product is well-received for its innovative design and ease of use, especially for DIY projects.
1. Did you strip the wires 1"
2. Where the triangle tabs on the connector lined up straight across
3. Did you push the wires through to the other side, they should be in about 1.25" when fully pushed in.
Thanks for trying them.
info@kjketterlingenterprises.com
Thanks KJ
Get an immediate answer with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Compare Similar Items
Irrigation System Component | |||
|---|---|---|---|
Connector | Kit | Fittings & Connectors | Connector |
Related Searches
Related Products
Grease Cap Kit for Valves (4-Pack)
Grease caps seal and protect your wire connections, making them indispensable in any automatic outdoor irrigation system. Kit includes (4) grease caps, (4) fork connectors, and (4) wire nuts.
K40psi FixedSpray Head Sprinkler Shrub Adapter 1/2 in. threaded riser 2 in./4 in. riserextension 3pk
The ability to regulate water pressure is crucial to overall system efficiency. The Kap-It plus Pressure Regulated Spray Head Shrub Adapter delivers efficient pressure regulation by keeping water pressure at a constant 40 psi. The built-in regulator is proven to reduce water waste and promote healthier root zones, because water is delivered at the optimum pressure for spray nozzles. The Kap-ITplus SHRB-4003 is compatible with both fixed-arc and Precision Distribution Control Adjustable Nozzles. With the ability to either have it at 2 in. or 4 in. makes the Kap-IT plus SHRB-4003 adjustable to fit many different applications. It is recommended for both residential and commercial applications.
Kap-It plus 2 in. Riser/Nozzle Extender Pressure Regulated (40 PSI) - DIY- (5-Pack)
Kap-It plus Riser includes a regulator built into the 2 in. stem, so that you can more effectively water your lawn or bed areas. With the Kap-It plus Riser you are able to maximize water pressure to 40 PSI across all heads. This balances out the distribution of the water and makes the flow the same throughout your sprinklers in a given zone. Add Kap-It plus Risers to your shrub adaptors and pop-ups for optimal water efficiency. Sprinklers operating at optimal pressure last longer and more importantly, help to save water. Not only does your system benefit from adding Kap-It plus Risers, but so does your lawn and shrubbery as Kap-It plus helps eliminate misting and fogging caused by excessively high water pressure. By adding 40 PSI pressure regulation Kap-It plus Riser to shrub adaptors and pop-ups, Kap-It plus will maintain 40 PSI on fixed spray nozzles up to 4 GPM (gallons per minute) with inlets greater than 50 PSI. Need to raise a sprinkler pop-up in your lawn. We recommend the Kap-It plus packs that include the Kap to protect the riser from mowers, weed whippers and everyday yard traffic. KAP-IT plus Riser allows anyone to raise a sprinkler head from the top instead of from the bottom. By extending the stem of a standard riser, you have raised the height. Simple, Secure, Fast and Permanent jump up your nozzle with a KAP-IT plus Riser.
Pop-Up Sprinkler Riser Extension- Attach to Top of Pop-Up, (1.5" lift) Pop-Up Riser & Kap-Virtually NO Digging (2-pk)
KAP-IT allows anyone to raise a sprinkler head from the top instead of from the bottom. By extending the stem of a standard riser, you have raised the height. The new snap on top protects the stem extension, while leaving all of manufacturer's original parts completely intact. KAP-IT keeps the rocks and debris normally introduced into the head when a sprinkler is unscrewed below ground. The snap on top is designed to still allow regular access to the inside of the head itself, by maintaining the ability to unscrew the top of the canister with the KAP-IT, even when more than one is stacked. Simple, Secure, Fast and Permanent jump up your nozzle with a KAP-IT.