Hi Joe, this is Sarah with Kohler Customer Service. I'm glad to answer your question. The water depth is measured from the bottom of the bowl to the overflow holes on the walls. This is the maximum depth the bowl can be filled, before the water spills into the overflow and down the drain. Thank you for choosing Kohler.
Hi Michelle, this is Sarah with Kohler Customer Service. I'm glad to answer your question. Both models are the same. The K-R2210 is a retailer sku and the K-2210 is a wholesaler sku. Thank you for choosing Kohler.
No, I got some metal hanger straps for $14 and cut it to size and that did the trick!
I have no idea what a K-R76255-4D is; but, putting that aside, I have always presumed all bath sink drains were one size and kitchen sink drains were another. At least there has never been an issue with a bath faucet set drain not fitting any bath sinks I have installed...granted, it has only been eleven but no problem yet.
Hi Ed, this is Sarah with Kohler Customer Service. I'm glad to address your question. Unfortunately, our cutout template dimensions are not readily available to share. We suggest either downloading a cutout template from our website on the sink that interests you or contacting our Literature team at 920-803-3985 to have a complimentary cutout template sent to you. This will allow you to compare with your current cutout to determine if this sink will fit! Thank you for choosing Kohler.
I got them from the manufacturer. It was 2 years ago but I recall a customer service call with them sending templates. Took s few days.
swinhi, this is Sarah with Kohler Co. We would love to help address your question. Please call our Customer Service team at 1-800-456-4537 (M-F; 8am-5pm CST) and include the material preference, installation type, and whether you are looking for an overall depth of 5-1/2" or a water depth of 5-1/2". Thank you for choosing KOHLER.
Hi, this is Laura with Kohler Co. I am happy to assist you with your question. Measuring from the top of the drain to the top of the sink is approximately 6"; this measurement is not provided on the spec sheet. Thank you for choosing KOHLER.
This is an UNDERmount sink, not a top / surface mount ("drop-in mount") so the edge won't be showing. If you want to see the edge surround then buy a drop-in / surface mount sink.