22 3/4 x 18. Cut out hole is smaller
Hi Dick, this is Sarah with Kohler Customer Service. I'm glad to address your question. This sink measures 22-11/16" from left to right and 17-7/8" from front to back. The sink measures 7-5/8" from top to bottom with a 3-5/8" water depth. Thank you for choosing Kohler.
It should work, I had the same situation.
Hello CJ, my name is Kassi with Kohler Co. I'd be glad to answer your question. The K-2351 recommended installation is a drop-in. Thank you for choosing Kohler.
Yes. The front to back is going to be close, but the sink should cover the entire hole.
Hi, this is Laura with Kohler Co. I am happy to assist you with your question. Mounting hardware is not required to install this sink. Thank you for choosing Kohler.
I may not be absolutely sure what you are asking regarding the hole drilling. I mounted my sink into a granite countertop and the cutout was the full sink perimeter which allowed about a one inch overlap of the sink onto the top of the granite. That let the faucet mount directly to the sink and not be influenced by type or thickness of the countertop.
Hi, this is Laura with Kohler Co. I am happy to assist you with your question. Per the Kohler Specification sheet, this sink is ADA compliant. Here is a link to the spec sheet: https://bit.ly/2CG6A8J Dimension of the sink are provided on page two. Thank you for choosing KOHLER.
outside width of sink 22 1/4" inside width of sink 20 1/4" outside depth of sink 17 3/4" outside depth of sink 11 3/4" deepest part of sink is 5 3/4"
Not familiar with the Elmbrook but we are very happy with our purchase of the Cimarron!