Hi WonderinginNC, this is Sarah with Kohler Customer Service. I'm glad to address your questions. This sink has a water depth of 3-1/4" (measured from the bottom of the sink to the center of the overflow hole. The internal bowl area is 15" from left to right and 10" from front to back; you are correct. Thank you for choosing Kohler.
Hi DP, this is Sarah with Kohler Customer Service. I'm glad to answer your question. At this time, we do not make a pedestal base or legs to fit this sink. Current Kohler wall mounted lavatories meet the 250 lbs. minimum load bearing requirements of the ASME A112.19.2-2005/CSA B45.1-05 National Consensus Standards for Vitreous China Plumbing Fixtures. Thank you for choosing Kohler.
Its black, when you get it you’ll see
strongbracket, my name is Jessica with Kohler Customer Service. I am happy to assist with your inquiry. K-2032-0 is packaged with a steel hanger bracket. Thank you for choosing Kohler.
Hi Ed, my name is Sarah with Kohler Co. I'm glad to address your question. When the sink is installed per our specifications, the sink counter surface will be 31" from the ground. This would put the overall height/ backsplash height at 36-1/8" from the floor. These measurements can be found on the specification sheet here: https://bit.ly/2FMwRV9. Thank you for choosing KOHLER.
5 inches high from top of sink.
how many inches is the backsplash
Hi, this is Laura with Kohler Co. I am happy to assist you with your question. This sink measures 20-3/4" L x 18-1/4" W. To see more dimensions, please scroll down and click on the Specifications pdf in the Product overview section. Thank you for choosing KOHLER.
Elias, my husband had built a cabinet for the previous wall sink with drawers & cabinet doors for the shelving(think box type cabinet). The old sink was cracked so after measuring & hunting down the closest fitting sink for the hole, I selected this one as minimal cutting would be done to make it fit. He had also placed a 1x2 in back so the sink would rest on this. The first contractor didn't do as I had asked in lowering the sink by shaving the 1x2 alittle so it would be even & didn't but the plumbing right so it leaked. I was able to get a better plumber the second time, who understood what I wanted & shaved the board til it was right & level. They even make a saw that does this! He also fixed the plumbing so no leaks. I have other wood surfaces that need to re-done and this one will be included as the 1st plumber scarred the wood when expanding the hole using a saber saw. This other saw, I forgot the name, but it shakes from left to right to make the fine cuts & comes battery operated, would not have scarred the wood.
This sink measures: 12.875"H x 20.75"W x 18.25"D.